HP-ICF-8023-RPTR :: hpRptrMonGlobalRunts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICF-8023-RPTRhpRptrMonGlobalRunts

hpRptrMonGlobalRunts

Module: HP-ICF-8023-RPTR

OID (symbolic): HP-ICF-8023-RPTR::hpRptrMonGlobalRunts

OID (numeric): 1.3.6.1.4.1.11.2.14.11.2.2.1.1.7

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: ********* THIS OBJECT IS DEPRECATED *********

This counter is incremented by one for each CarrierEvent on any port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times but less than 565 bit times.

An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the hpRptrMonGlobalShortEvents counter or the hpRptrMonGlobalRunts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not increment the hpRptrMonGlobalRunts counter. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine.

Runts usually indicate collision fragments, a normal network event. This counter is the summation of the values of the rptrMonitorPortRunts counter for all of the ports in this repeater.

What is hpRptrMonGlobalRunts?

This deprecated read-only Counter32 summed runt frames (undersized, non-collision carrier events) across every port on the repeater; runts usually indicate ordinary collision fragments rather than a hardware fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.7
snmpwalk -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalRunts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.7.1
snmpget -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalRunts.1

Start monitoring HP repeater/hub hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-8023-RPTR::hpRptrMonGlobalRunts OID value, configure state conditions and alerts, and monitor any HP repeater/hub hardware from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.2hpicfRepeaterHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2hpRptrMonitorHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1hpRptrMonitorGlobalHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1.1hpRptrMonCountersHP-ICF
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.2.2.1.1.7hpRptrMonGlobalRuntsHP-ICF-8023-RPTR