HP-ICF-8023-RPTR :: hpRptrMonGlobalLateEvents

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICF-8023-RPTRhpRptrMonGlobalLateEvents

hpRptrMonGlobalLateEvents

Module: HP-ICF-8023-RPTR

OID (symbolic): HP-ICF-8023-RPTR::hpRptrMonGlobalLateEvents

OID (numeric): 1.3.6.1.4.1.11.2.14.11.2.2.1.1.9

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: ********* THIS OBJECT IS DEPRECATED *********

This counter is incremented by one for each CarrierEvent on any port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the LateEventThreshold. Such a CarrierEvent is counted twice, as both hpRptrMonGlobalCollisions and hpRptrMonGlobalLateEvents. The LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. This counter is the summation of the values of the rptrMonitorPortLateEvents counter for all of the ports in this repeater.

What is hpRptrMonGlobalLateEvents?

This deprecated read-only Counter32 summed late collisions (detected after the point in the frame where they shouldn't normally occur) across every port on the repeater; each late event is also counted once in hpRptrMonGlobalCollisions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.9
snmpwalk -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalLateEvents

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.9.1
snmpget -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalLateEvents.1

Start monitoring HP repeater/hub hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-8023-RPTR::hpRptrMonGlobalLateEvents OID value, configure state conditions and alerts, and monitor any HP repeater/hub hardware from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.2hpicfRepeaterHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2hpRptrMonitorHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1hpRptrMonitorGlobalHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1.1hpRptrMonCountersHP-ICF
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.2.2.1.1.9hpRptrMonGlobalLateEventsHP-ICF-8023-RPTR