HP-ICF-8023-RPTR :: hpRptrMonGlobalDataRateMismatches

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICF-8023-RPTRhpRptrMonGlobalDataRateMismatches

hpRptrMonGlobalDataRateMismatches

Module: HP-ICF-8023-RPTR

OID (symbolic): HP-ICF-8023-RPTR::hpRptrMonGlobalDataRateMismatches

OID (numeric): 1.3.6.1.4.1.11.2.14.11.2.2.1.1.11

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: ********* THIS OBJECT IS DEPRECATED *********

This counter is incremented by one for each frame received on any port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented. This counter is the summation of the values of the rptrMonitorPortDatRateMismatches counter for all of the ports in this repeater.

What is hpRptrMonGlobalDataRateMismatches?

This deprecated read-only Counter32 summed frames received at a data rate detectably mismatched from the repeater's own transmit frequency across every port, a sign of a misconfigured or incompatible attached device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.11
snmpwalk -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalDataRateMismatches

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.2.2.1.1.11.1
snmpget -v2c -c public <target> HP-ICF-8023-RPTR::hpRptrMonGlobalDataRateMismatches.1

Start monitoring HP repeater/hub hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-8023-RPTR::hpRptrMonGlobalDataRateMismatches OID value, configure state conditions and alerts, and monitor any HP repeater/hub hardware from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.2hpicfRepeaterHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2hpRptrMonitorHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1hpRptrMonitorGlobalHP-ICF
1.3.6.1.4.1.11.2.14.11.2.2.1.1hpRptrMonCountersHP-ICF
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.2.2.1.1.11hpRptrMonGlobalDataRateMismatchesHP-ICF-8023-RPTR