HORIZON-LIBRARY-MONITOR-MIB

All MIBs › HORIZON-LIBRARY-MONITOR-MIB

Category: Telephony and VoIP

Description: Comverse Horizon library monitor MIB for monitoring media library resources on Horizon media server platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HORIZON-LIBRARY-MONITOR-MIB?

HORIZON-LIBRARY-MONITOR-MIB is a Comverse Horizon enterprise MIB for monitoring media library resources on the Horizon media server platform, used in telecom voicemail/messaging and media-serving systems. It exposes status data about media library resource usage — such as available storage capacity, active media sessions, or library access errors — falling into the performance/resource and fault categories for a media-serving application. Its monitoring emphasis is on software/service health: confirming the media library service is up and has adequate resources (storage, sessions) to serve requests, a software/application-status concern more than a hardware sensor concern, though underlying disk/storage exhaustion would be a hardware-adjacent signal. No specific external MIB dependency is indicated in the available source. It's deployed in telecom/media-server environments running Comverse Horizon platforms for voicemail, messaging, or media playback services. Engineers can download the HORIZON-LIBRARY-MONITOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HORIZON-LIBRARY-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

StorageTek tape library systems

Monitoring Examples

No specific object or table names were provided in the source metadata for this module, so a concrete polling example can't be grounded in real identifiers; in general terms, an operator would use this module to confirm the Horizon media library service is running with sufficient free capacity, since resource exhaustion here would cause media playback/recording requests to fail even while the underlying server hardware remains healthy.

What Can Be Monitored

media library resource availability
media library service status
library access errors

Imported Objects

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress
OBJECT-TYPE
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
storagetek	1.3.6.1.4.1.1211
products	1.3.6.1.4.1.1211.1
horizonLibraryMonitor	1.3.6.1.4.1.1211.1.5
NTF hlmTrpErr	1.3.6.1.4.1.1211.1.5.0.1			A error trap message
NTF hlmTrpWar	1.3.6.1.4.1.1211.1.5.0.2			A warning trap message
NTF hlmTrpInfo	1.3.6.1.4.1.1211.1.5.0.3			An info trap message
NTF hlmTrpUncl	1.3.6.1.4.1.1211.1.5.0.4			An unclassified trap message
NTF hlmTrpNorStatus	1.3.6.1.4.1.1211.1.5.0.5			A normal status notification trap
NTF hlmTrpUnkStatus	1.3.6.1.4.1.1211.1.5.0.6			A unknown status notification trap
NTF hlmTrpWarStatus	1.3.6.1.4.1.1211.1.5.0.7			A warning status notification trap
NTF hlmTrpMinStatus	1.3.6.1.4.1.1211.1.5.0.8			A minor status notification trap
NTF hlmTrpMajStatus	1.3.6.1.4.1.1211.1.5.0.9			A major status notification trap
NTF hlmTrpCriStatus	1.3.6.1.4.1.1211.1.5.0.10			A critical status notification trap
hlmAgent	1.3.6.1.4.1.1211.1.5.1
STR hlmAgtRelease	1.3.6.1.4.1.1211.1.5.1.1	DisplayString	read-only	The release of the agent. Format is %d.%d
INT hlmAgtStatus	1.3.6.1.4.1.1211.1.5.1.2	INTEGER	read-only	When starting and initializing internal variables, the agent is >initializingrunningexpiringexpired<.
STR hlmAgtBootDate	1.3.6.1.4.1.1211.1.5.1.3	DisplayString	read-only	The date & time when the agent started. Format is YYYY-MM-DDThh:mm
STR hlmAgtUrl	1.3.6.1.4.1.1211.1.5.1.4	DisplayString	read-write	Url to be provided at the agent level-Can be used for library web based management purpose
hlmTrap	1.3.6.1.4.1.1211.1.5.2
INT hlmTrpMinPollingRate	1.3.6.1.4.1.1211.1.5.2.1	INTEGER	read-only	Minimum polling rate in second. The value is read from a file when the agent starts
INT hlmTrpCurPollingRate	1.3.6.1.4.1.1211.1.5.2.2	INTEGER	read-write	Current polling rate in seconde. The value could not be set under hlmTrpMinPollingRate
STR hlmTrpMsg	1.3.6.1.4.1.1211.1.5.2.3	DisplayString	read-only	A trap displayString varbind
OID hlmTrpOid	1.3.6.1.4.1.1211.1.5.2.4	OBJECT IDENTIFIER	read-only	A trap OID varbind
INT hlmTrpLogReportLevel	1.3.6.1.4.1.1211.1.5.2.5	INTEGER	read-write	Log message reporting level preferred by the Enterprise Management Framework destinations. 'silent' means no message is sent to the framework. 'error' means only error messages are sent. 'warning' means errors+warnings are sent. 'info' means errors+warnings+information messages are sent. 'unclassified' means every messages stored into the library are sent to the framework
hlmHardware	1.3.6.1.4.1.1211.1.5.3
hlmLibrary	1.3.6.1.4.1.1211.1.5.3.1
INT hlmLibCount	1.3.6.1.4.1.1211.1.5.3.1.1	INTEGER	read-only	Count of the libraries in the library table
hlmLibTable	1.3.6.1.4.1.1211.1.5.3.1.2		not-accessible	This is a table of detected library detected on the SCSI bus
hlmLibEntry	1.3.6.1.4.1.1211.1.5.3.1.2.1		not-accessible	An entry in the library table
INT hlmLibIndex	1.3.6.1.4.1.1211.1.5.3.1.2.1.1	INTEGER	read-only	Integer index of the library
STR hlmLibType	1.3.6.1.4.1.1211.1.5.3.1.2.1.2	DisplayString	read-only	The model of the library, e.g 9730, 9710
STR hlmLibVendor	1.3.6.1.4.1.1211.1.5.3.1.2.1.3	DisplayString	read-only	The vendor of the library, e.g STK
INT hlmLibStatus	1.3.6.1.4.1.1211.1.5.3.1.2.1.4	INTEGER	read-only	The status of the library. See hlmLibSense for details when this status equals error
HLM hlmLibSense	1.3.6.1.4.1.1211.1.5.3.1.2.1.5	HlmSenseCode	read-only	The sense info when status is error
STR hlmLibMicLevel	1.3.6.1.4.1.1211.1.5.3.1.2.1.6	DisplayString	read-only	The micro code level of the library
INT hlmLibSlotCount	1.3.6.1.4.1.1211.1.5.3.1.2.1.7	INTEGER	read-only	Count of slot of the library
INT hlmLibCapCount	1.3.6.1.4.1.1211.1.5.3.1.2.1.8	INTEGER	read-only	Count of CAP of the library
INT hlmLibDriveCount	1.3.6.1.4.1.1211.1.5.3.1.2.1.9	INTEGER	read-only	Count of drives present into the library
STR hlmLibSerialNumber	1.3.6.1.4.1.1211.1.5.3.1.2.1.10	DisplayString	read-only	The modelserial number of the library
STR hlmLibSenseText	1.3.6.1.4.1.1211.1.5.3.1.2.1.11	DisplayString	read-only	A short label describing the sense code returned by the library -- see hlmLibSense
STR hlmLibUrl	1.3.6.1.4.1.1211.1.5.3.1.2.1.12	DisplayString	read-write	Url provided at the library level - Can be used for web based library management purpose
hlmDrive	1.3.6.1.4.1.1211.1.5.3.2
INT hlmDrvCount	1.3.6.1.4.1.1211.1.5.3.2.1	INTEGER	read-only	Total count of the drives detected. They may not all belong to the same library
hlmDrvTable	1.3.6.1.4.1.1211.1.5.3.2.2		not-accessible	This is the table of drives.
hlmDrvEntry	1.3.6.1.4.1.1211.1.5.3.2.2.1		not-accessible	An entry in the drive table
INT hlmDrvLibIndex	1.3.6.1.4.1.1211.1.5.3.2.2.1.1	INTEGER	read-only	Index of the library it belongs to
INT hlmDrvIndex	1.3.6.1.4.1.1211.1.5.3.2.2.1.2	INTEGER	read-only	Index of the drive
INT hlmDrvType	1.3.6.1.4.1.1211.1.5.3.2.2.1.3	INTEGER	read-only	The model of the drive. Other values might be returned to describe new model of drives. These values and their corresponding drive model will be read from a file at the agent start
INT hlmDrvStatus	1.3.6.1.4.1.1211.1.5.3.2.2.1.4	INTEGER	read-only	The status of the drive. See hlmDrvSense for details when rhis status equals error
HLM hlmDrvSense	1.3.6.1.4.1.1211.1.5.3.2.2.1.5	HlmSenseCode	read-only	The sense info of the drive. See hlmLibSense for possible values
INT hlmDrvContent	1.3.6.1.4.1.1211.1.5.3.2.2.1.6	INTEGER	read-only	Report if the drive contains a cartridge
INT hlmDrvVolType	1.3.6.1.4.1.1211.1.5.3.2.2.1.7	INTEGER	read-only	The type of the catridge present into the drive. Other value may be returned to describe new model of volume.
STR hlmDrvVolLabel	1.3.6.1.4.1.1211.1.5.3.2.2.1.8	DisplayString	read-only	The label of the cartridge present into the drive, '------' if the drive is empty
STR hlmDrvTypeText	1.3.6.1.4.1.1211.1.5.3.2.2.1.9	DisplayString	read-only	Textual type of the drive
STR hlmDrvVolTypeText	1.3.6.1.4.1.1211.1.5.3.2.2.1.10	DisplayString	read-only	Textual type of the volume present into the drive
STR hlmDrvSerialNumber	1.3.6.1.4.1.1211.1.5.3.2.2.1.11	DisplayString	read-only	The serial number of the drive
STR hlmDrvSenseText	1.3.6.1.4.1.1211.1.5.3.2.2.1.12	DisplayString	read-only	A short description of the sense code
hlmCap	1.3.6.1.4.1.1211.1.5.3.3
INT hlmCapCount	1.3.6.1.4.1.1211.1.5.3.3.1	INTEGER	read-only	Total count of CAP
hlmCapTable	1.3.6.1.4.1.1211.1.5.3.3.2		not-accessible	This is the table of CAPs.
hlmCapEntry	1.3.6.1.4.1.1211.1.5.3.3.2.1		not-accessible	An entry in the CAP table
INT hlmCapLibIndex	1.3.6.1.4.1.1211.1.5.3.3.2.1.1	INTEGER	read-only	Index of the library it belongs to
INT hlmCapIndex	1.3.6.1.4.1.1211.1.5.3.3.2.1.2	INTEGER	read-only	Index of the CAP
INT hlmCapHandAccessibility	1.3.6.1.4.1.1211.1.5.3.3.2.1.3	INTEGER	read-only	Report whether the CAP is open or not
INT hlmCapStatus	1.3.6.1.4.1.1211.1.5.3.3.2.1.4	INTEGER	read-only	Report the operational state of the CAP.
HLM hlmCapSense	1.3.6.1.4.1.1211.1.5.3.3.2.1.5	HlmSenseCode	read-only	Sense info when the status equals error.
INT hlmCapCellCount	1.3.6.1.4.1.1211.1.5.3.3.2.1.6	INTEGER	read-only	Count of cell of the cap
STR hlmCapSenseText	1.3.6.1.4.1.1211.1.5.3.3.2.1.7	DisplayString	read-only	A short description of the sense code

RFC description

Monitors tape library media changers, tracking library status, drive types, and cartridge information for backup systems.

Start monitoring StorageTek tape library management system with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HORIZON-LIBRARY-MONITOR-MIB

What Is HORIZON-LIBRARY-MONITOR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description