HM2-PLATFORM-MSRP-MIB

All MIBs › HM2-PLATFORM-MSRP-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2013-04-10

Category: Standard: IEEE 802, Vendor: Belden

Description: Hirschmann HiOS (HM2) MSRP MIB for Multiple Stream Reservation Protocol (IEEE 802.1Qat) configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HM2-PLATFORM-MSRP-MIB?

HM2-PLATFORM-MSRP-MIB is a Hirschmann private HiOS Platform2 MIB implementing IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP) and related 802.1Qav configuration on Hirschmann managed switches. It exposes per-port MSRP enable state, failed-registration counts, last PDU origin, PVID, and bridge-wide settings such as talker pruning and maximum fan-in ports, together with stream reservation entries and MRP statistics. This is chiefly a software/protocol-status MIB used to confirm that time-sensitive stream reservations are being registered successfully, with failed-registration counters and stats revealing reservation problems rather than physical hardware issues. It depends on the IEEE 802.1Qat/802.1Qav standards and complements the companion MMRP MIB and standard bridge MIBs. It is deployed on Hirschmann industrial switches carrying time-sensitive/audio-video streaming traffic that relies on MSRP stream reservations. Engineers can download the HM2-PLATFORM-MSRP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HM2-PLATFORM-MSRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann industrial Ethernet switch

Monitoring Examples

hm2AgentDot1qPortMsrpTable/Entry rows, keyed by hm2AgentDot1qMsrpPort, expose hm2AgentDot1qPortMsrpEnabledStatus and hm2AgentDot1qPortMsrpFailedRegistrations; a rising failed-registration count indicates streams are being rejected on that port, perhaps due to insufficient reserved bandwidth. hm2AgentDot1qPortMsrpLastPduOrigin helps identify which talker most recently registered, and hm2AgentDot1qBridgeMsrpMaxFanInPorts/hm2AgentDot1qBridgeMsrpTalkerPruning let an admin confirm the bridge-wide reservation limits and pruning behavior match the network's stream requirements, with hm2AgentDot1qMsrpStreamTable listing active stream reservations.

What Can Be Monitored

per-port MSRP enabled status
failed stream registrations
last MSRP PDU origin
bridge MSRP talker pruning setting
max fan-in ports
active MSRP stream reservations

Imported Objects

From BRIDGE-MIB

BridgeId

From HM2-PLATFORM-MRP-MIB

hm2AgentDot1qMrpMxrp

OBJECT-IDENTITY

From Q-BRIDGE-MIB

VlanId

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hm2AgentDot1qMrpMsrpPktTx OID:

Select a Hirschmann HiOS Platform2 industrial switch (802.1Qat/Qav MSRP stream reservation) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hm2AgentDot1qMrpMsrpPktTx into the Find box to locate it in the OID tree, then select it and click OK. The number of frames was transmitted. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hm2PlatformMSRP	1.3.6.1.4.1.248.12.60.2.3			The Hirschmann Private Platform2 MIB for 802.1Qat, 802.1Qav Configuration. Copyright (C) 2013. All Rights Reserved.
hm2AgentDot1qMsrp	1.3.6.1.4.1.248.12.60.2.3.1
hm2AgentDot1qPortMsrpTable	1.3.6.1.4.1.248.12.60.2.3.1.1		not-accessible	A table of MSRP control information about every bridge port. This is indexed by hm2AgentDot1qMsrpPort.
hm2AgentDot1qPortMsrpEntry	1.3.6.1.4.1.248.12.60.2.3.1.1.1		not-accessible	MSRP control information for a bridge port.
I32 hm2AgentDot1qMsrpPort	1.3.6.1.4.1.248.12.60.2.3.1.1.1.1	Integer32	not-accessible	The MSRP port number.
T/F hm2AgentDot1qPortMsrpEnabledStatus	1.3.6.1.4.1.248.12.60.2.3.1.1.1.2	TruthValue	read-write	The administrative state of MSRP operation on this port. The value true(1) indicates that MSRP is enabled on this port in all VLANs as long as hm2AgentDot1qBridgeMsrpEnabledStatus is also true(1). A value of false(2) indicates that MSRP is disabled on this port in all VLANs: any MSRP frames received will be silently discarded, and no MSRP registrations will be propagated from other ports. Setting this to a value of true(1) will be stored by the agent but will only take effect on the MSRP protocol operation if hm2AgentDot1qBridgeMsrpEnabledStatus also indicates the value true(1). This object affects all MSRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
C64 hm2AgentDot1qPortMsrpFailedRegistrations	1.3.6.1.4.1.248.12.60.2.3.1.1.1.3	Counter64	read-only	The total number of failed MSRP registrations, for any reason, in all VLANs, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
MAC hm2AgentDot1qPortMsrpLastPduOrigin	1.3.6.1.4.1.248.12.60.2.3.1.1.1.4	MacAddress	read-only	The Source MAC Address of the last MSRP message received on this port.
VLA hm2AgentDot1qPortMsrpPvid	1.3.6.1.4.1.248.12.60.2.3.1.1.1.5	VlanId	read-write	The default VLAN ID that Streams are assigned to. Talkers learn this VID from the SRP Domain attribute and tag Streams accordingly.
T/F hm2AgentDot1qBridgeMsrpEnabledStatus	1.3.6.1.4.1.248.12.60.2.3.1.2	TruthValue	read-write	The administrative status requested by management for MSRP. The value true(1) indicates that MSRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When false(2), MSRP is disabled, in all VLANs and on all ports, and all MSRP frames will be forwarded transparently. This objects affects both Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
T/F hm2AgentDot1qBridgeMsrpTalkerPruning	1.3.6.1.4.1.248.12.60.2.3.1.3	TruthValue	read-write	The value of the talkerPruning parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are only declared on ports that have the Stream destination_address registered in the MMRP MAC Address Registration Entries. When false(2), Talker attribute are declared on all egress ports in the active topology. The value of this object MUST be retained across reinitializations of the management system.
U32 hm2AgentDot1qBridgeMsrpMaxFanInPorts	1.3.6.1.4.1.248.12.60.2.3.1.4	Unsigned32	read-write	The value of the msrpMaxFanInPorts parameter which limits the total number of ports on a Bridge that are allowed to establish reservations for inbound Streams. A value of zero (0) indicates no fan-in limit is being specified and calculations involving fan-in will only be limited by the number of MSRP enabled ports. The value of this object MUST be retained across reinitializations of the management system.
T/F hm2AgentDot1qBridgeMsrpBoundaryPropagate	1.3.6.1.4.1.248.12.60.2.3.1.6	TruthValue	read-write	The value of the boundaryPropagate parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are propagated to the ports marked as boundary port. When false(2) Talker attributes are not propagated to the ports marked as boundary port. The value of this object MUST be retained across reinitializations of the management system.
hm2AgentDot1qMsrpStreamTable	1.3.6.1.4.1.248.12.60.2.3.1.7		not-accessible	A table of detailed MSRP stream information. This is indexed by Stream ID.
hm2AgentDot1qMsrpStreamEntry	1.3.6.1.4.1.248.12.60.2.3.1.7.1		not-accessible	A list of objects containing characteristics for each registered Stream. Rows in the table are automatically created for Streams registered on any port of a bridge
I32 hm2AgentDot1qMsrpStreamIndex	1.3.6.1.4.1.248.12.60.2.3.1.7.1.1	Integer32	not-accessible	An index for MSRP Details Table.
HM2 hm2AgentDot1qMsrpStreamID	1.3.6.1.4.1.248.12.60.2.3.1.7.1.2	Hm2AgentDot1qMsrpStreamIdValue	read-only	The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
MAC hm2AgentDot1qMsrpStreamDestMacAddr	1.3.6.1.4.1.248.12.60.2.3.1.7.1.3	MacAddress	read-only	The MAC destination address for the Stream described by this reservation.
I32 hm2AgentDot1qMsrpStreamVlanId	1.3.6.1.4.1.248.12.60.2.3.1.7.1.4	Integer32	read-only	The VLAN ID associated with the MSRP registration for this Stream.
U32 hm2AgentDot1qMsrpStreamTspecMaxFrameSize	1.3.6.1.4.1.248.12.60.2.3.1.7.1.5	Unsigned32	read-only	The maximum size frame that will be sent by a Talker for this Stream. This value is part of the Traffic Specification for the Stream.
U32 hm2AgentDot1qMsrpStreamTspecMaxIntervalFrames	1.3.6.1.4.1.248.12.60.2.3.1.7.1.6	Unsigned32	read-only	The maximum number of frame that will be sent during a class measurement interval. This value is part of the Traffic Specification for the Stream.
HM2 hm2AgentDot1qMsrpStreamDataFramePriority	1.3.6.1.4.1.248.12.60.2.3.1.7.1.7	Hm2AgentDot1qPriorityValue	read-only	The 802.1Q user priority value that the referenced Stream will be tagged with. This value is used to distinguish Class A and Class B traffic.
HM2 hm2AgentDot1qMsrpStreamRank	1.3.6.1.4.1.248.12.60.2.3.1.7.1.8	Hm2AgentDot1qMsrpStreamRankValue	read-only	SRP supports emergency and non-emergency. Emergency traffic will interrupt non-emergency traffic if there is insufficient bandwidth or resources available for the emergency traffic.
hm2AgentDot1qMsrpReservationTable	1.3.6.1.4.1.248.12.60.2.3.1.8		not-accessible	A table containing Stream attribute registrations per port.
hm2AgentDot1qMsrpReservationEntry	1.3.6.1.4.1.248.12.60.2.3.1.8.1		not-accessible	A list of objects containing Stream attribute registrations per port. Rows in the table are automatically created for Streams registered on any port of a bridge.
HM2 hm2AgentDot1qMsrpReservationStreamId	1.3.6.1.4.1.248.12.60.2.3.1.8.1.1	Hm2AgentDot1qMsrpStreamIdValue	not-accessible	The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
HM2 hm2AgentDot1qMsrpReservationDirection	1.3.6.1.4.1.248.12.60.2.3.1.8.1.2	Hm2AgentDot1qMsrpReservationDirectionValue	not-accessible	The source of this Stream registration, either Talker or Listener.
HM2 hm2AgentDot1qMsrpReservationDeclarationType	1.3.6.1.4.1.248.12.60.2.3.1.8.1.3	Hm2AgentDot1qMsrpReservationDeclarationTypeValue	read-only	The type of Talker or Listener registration.
U32 hm2AgentDot1qMsrpReservationAccumulatedLatency	1.3.6.1.4.1.248.12.60.2.3.1.8.1.4	Unsigned32	read-only	The Accumulated Latency associated with the current registration. For Talker registrations this represents the accumulated latency from the Talker to the ingress port of this Bridge. For Listener registrations this represents the accumulated latency to the ingress port of the neighbor Bridge or end stations. This include the latency of the media attached to this egress port.
BRI hm2AgentDot1qMsrpReservationFailureBridgeId	1.3.6.1.4.1.248.12.60.2.3.1.8.1.5	BridgeId	read-only	The first Bridge that changes a Talker Advertise to a Talker Failed registration will report its Bridge Identification in this field. That single Bridge Identification is then propagated from Bridge to Bridge.
HM2 hm2AgentDot1qMsrpReservationFailureCode	1.3.6.1.4.1.248.12.60.2.3.1.8.1.6	Hm2AgentDot1qMsrpReservationFailureCodeValue	read-only	The first Bridge that changes a Talker Advertise to a Talker Failed registration will report the Failure Code in this field. That single Failure Code is then propagated from Bridge to Bridge.
C64 hm2AgentDot1qMsrpReservationDroppedStreamFrames	1.3.6.1.4.1.248.12.60.2.3.1.8.1.7	Counter64	read-only	A count of the number of data stream frames that have been dropped for whatever reason. These are not MSRP frames, but the stream data frames that are carried by the MSRP Reservation. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
U32 hm2AgentDot1qMsrpReservationStreamAge	1.3.6.1.4.1.248.12.60.2.3.1.8.1.8	Unsigned32	read-only	The number of seconds since the reservation was established on this port. Talkers shall report this as the seconds since the first receipt of the Talker Advertise or Talker Failed. Listeners shall report this as the number of seconds since the destination_address was first added to the Dynamic Reservations Entries.
hm2AgentDot1qMrpMsrpStats	1.3.6.1.4.1.248.12.60.2.3.2
C32 hm2AgentDot1qMrpMsrpPktTxEx	1.3.6.1.4.1.248.12.60.2.3.2.1	Counter32	read-only	The number of frames was transmitted.
C32 hm2AgentDot1qMrpMsrpPktRx	1.3.6.1.4.1.248.12.60.2.3.2.2	Counter32	read-only	The number of frames was received.
C32 hm2AgentDot1qMrpMsrpPktRxBadHeader	1.3.6.1.4.1.248.12.60.2.3.2.3	Counter32	read-only	The number of frames with bad header was received.
C32 hm2AgentDot1qMrpMsrpPktRxBadFormat	1.3.6.1.4.1.248.12.60.2.3.2.4	Counter32	read-only	The number of frames with bad data field was received.
C32 hm2AgentDot1qMrpMsrpPktTxFailure	1.3.6.1.4.1.248.12.60.2.3.2.5	Counter32	read-only	The number of frames was not transmitted.
hm2AgentDot1qMrpMsrpStatsTable	1.3.6.1.4.1.248.12.60.2.3.2.6		not-accessible	A table which contains MSRP statistics per port.
hm2AgentDot1qMrpMsrpStatsEntry	1.3.6.1.4.1.248.12.60.2.3.2.6.1		not-accessible	MSRP statistics entry.
I32 hm2AgentDot1qMrpMsrpIntf	1.3.6.1.4.1.248.12.60.2.3.2.6.1.1	Integer32	not-accessible	Index of hm2AgentDot1qMrpMsrpStatistics table.
C32 hm2AgentDot1qMrpMsrpPortPktTx	1.3.6.1.4.1.248.12.60.2.3.2.6.1.2	Counter32	read-only	The number of frames was transmitted on interface.
C32 hm2AgentDot1qMrpMsrpPortPktRx	1.3.6.1.4.1.248.12.60.2.3.2.6.1.3	Counter32	read-only	The number of frames was received on interface.
C32 hm2AgentDot1qMrpMsrpPortPktRxBadHeader	1.3.6.1.4.1.248.12.60.2.3.2.6.1.4	Counter32	read-only	The number of frames with bad header was received on interface.
C32 hm2AgentDot1qMrpMsrpPortPktRxBadFormat	1.3.6.1.4.1.248.12.60.2.3.2.6.1.5	Counter32	read-only	The number of frames with bad data field was received on interface.
C32 hm2AgentDot1qMrpMsrpPortPktTxFailure	1.3.6.1.4.1.248.12.60.2.3.2.6.1.6	Counter32	read-only	The number of frames was not transmitted on interface.
C32 hm2AgentDot1qMrpMsrpPortPktRegFailure	1.3.6.1.4.1.248.12.60.2.3.2.6.1.7	Counter32	read-only	The number of failed registration attempts on interface.
C32 hm2AgentDot1qMrpMsrpPktMessageFailure	1.3.6.1.4.1.248.12.60.2.3.2.7	Counter32	read-only	The number of failures while adding message into MSRP queue.
hm2AgentDot1qFqtss	1.3.6.1.4.1.248.12.60.2.3.3
hm2AgentDot1qFqtssNotifications	1.3.6.1.4.1.248.12.60.2.3.3.0
hm2AgentDot1qFqtssObjects	1.3.6.1.4.1.248.12.60.2.3.3.1
hm2AgentDot1qFqtssConformance	1.3.6.1.4.1.248.12.60.2.3.3.2
hm2AgentDot1qFqtssBap	1.3.6.1.4.1.248.12.60.2.3.3.3
hm2AgentDot1qFqtssBapTable	1.3.6.1.4.1.248.12.60.2.3.3.3.1		not-accessible	A table containing a set of bandwidth availability parameters for each traffic class that supports the credit-based shaper algorithm. All writable objects in this table must be persistent over power up restart/reboot.
hm2AgentDot1qFqtssBapEntry	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1		not-accessible	A list of objects containing bandwidth allocation information for each traffic class that supports the credit-based shaper algorithm. Rows in the table are automatically created and deleted as a result of the operation of the algorithm described in 34.5.
HM2 hm2AgentDot1qFqtssTrafficClass	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.1	Hm2AgentDot1qFqtssTrafficClassValue	not-accessible	The traffic class number associated with the row of the table. A row in this table is created for each traffic class that supports the credit-based shaper algrithm and whose bandwidth can be reserved for AV traffic.
HM2 hm2AgentDot1qFqtssDeltaBandwidth	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.2	Hm2AgentDot1qFqtssDeltaBandwidthValue	read-write	The value of the deltaBandwidth parameter for the traffic class. This value is represented as a fixed point number scaled by a factor of 1,000,000; i.e., 100,000,000 (the maximum value) represents 100%. The default value of the deltaBandwidth parameter for the highest numbered traffic class that supports the credit-based shaper algorithm is 75%; for all lower numbered traffic classes that support the credit-based shaper algorithm the default value is 0%. The value of this object MUST be retained across reinitializations of the management system.
U32 hm2AgentDot1qFqtssOperIdleSlopeMs	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.3	Unsigned32	read-only	The most significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read at the same time as hm2AgentDot1qFqtssOperIdleSlopeLs, which represents the LS 32 bits of the value, in order for the read operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP; otherwise, the value of hm2AgentDot1qFqtssOperIdleSlopeMs is equal to the value of hm2AgentDot1qFqtssAdminIdleSlopeMs. The value of this object MUST be retained across reinitializations of the management system.
U32 hm2AgentDot1qFqtssOperIdleSlopeLs	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.4	Unsigned32	read-only	The least significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read at the same time as hm2AgentDot1qFqtssOperIdleSlopeMs, which represents the LS 32 bits of the value, in order for the read operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP; otherwise, the value of hm2AgentDot1qFqtssOperIdleSlopeLs is equal to the value of hm2AgentDot1qFqtssAdminIdleSlopeLs.. The value of this object MUST be retained across reinitializations of the management system.
U32 hm2AgentDot1qFqtssAdminIdleSlopeMs	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.5	Unsigned32	read-write	The most significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST be read or written at the same time as hm2AgentDot1qFqtssAdminIdleSlopeLs, which represents the LS 32 bits of the value, in order for the read or write operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP, and any changes to the value of this object have no effect on the operational value of idleSlope(N). The value of this object MUST be retained across reinitializations of the management system.
U32 hm2AgentDot1qFqtssAdminIdleSlopeLs	1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.6	Unsigned32	read-write	The least significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST be read or written at the same time as hm2AgentDot1qFqtssAdminIdleSlopeMs, which represents the LS 32 bits of the value, in order for the read or write operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP, and any changes to the value of this object have no effect on the operational value of idleSlope(N). The value of this object MUST be retained across reinitializations of the management system.
hm2AgentDot1qFqtssMappings	1.3.6.1.4.1.248.12.60.2.3.3.4
hm2AgentDot1qFqtssTxSelectionAlgorithmTable	1.3.6.1.4.1.248.12.60.2.3.3.4.1		not-accessible	A table containing the assignment of transmission selection algorithms to traffic classes for the Port. This table provides management of the Transmission Selection Algorithm Table defined in 8.6.8. For a given Port, a row in the table exists for each traffic class that is supported by the Port. The default assignments of transmission selection algorithms to traffic classes in the table are made on instantiation of the table, in accordance with the defaults defined in 8.6.8 and 34.5. All writable objects in this table must be persistent over power up restart/reboot.
hm2AgentDot1qFqtssTxSelectionAlgorithmEntry	1.3.6.1.4.1.248.12.60.2.3.3.4.1.1		not-accessible	A list of objects that contain the mapping of a traffic class value to a transmission selection algorithm value.
HM2 hm2AgentDot1qFqtssTxSelectionAlgorithmID	1.3.6.1.4.1.248.12.60.2.3.3.4.1.1.1	Hm2AgentDot1qFtqssTxSelectionAlgorithmIDValue	read-write	The identifier of the transmission selection algorithm assigned to the traffic class. The value of this object MUST be retained across reinitializations of the management system.
hm2AgentDot1qFqtssSrpRegenOverrideTable	1.3.6.1.4.1.248.12.60.2.3.3.4.2		not-accessible	A table containing the set of priority regeneration table override values for the Port. The recommended default values of priorities associated with SR classes, and the corresponding override values, are defined in 6.9.4. All writable objects in this table must be persistent over power up restart/reboot.
hm2AgentDot1qFqtssSrpRegenOverrideEntry	1.3.6.1.4.1.248.12.60.2.3.3.4.2.1		not-accessible	A list of objects that contain the mapping of a priority value to a priority regeneration override value, and a boundary port indication. Rows in the table exist for all priorities that are associated with SR classes.
HM2 hm2AgentDot1qFqtssSrClassPriority	1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.1	Hm2AgentDot1qPriorityValue	read-write	The priority value that is overridden at the SRP domain boundary.
HM2 hm2AgentDot1qFqtssPriorityRegenOverride	1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.2	Hm2AgentDot1qPriorityValue	read-write	The priority value that is used to override the priority regeneration table entry at the SRP domain boundary. The value of this object MUST be retained across reinitializations of the management system.
T/F hm2AgentDot1qFqtssSrpBoundaryPort	1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.3	TruthValue	read-only	The value of the SRPdomainBoundaryPort parameter (6.6.4) for the priority.

RFC description

Hirschmann private platform MIB for IEEE 802.1Qat and 802.1Qav stream reservation protocol configuration and management.

Start monitoring Hirschmann HiOS Platform2 industrial switch (802.1Qat/Qav MSRP stream reservation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HM2-PLATFORM-MSRP-MIB