HH3C-VBR-MIB

All MIBs › HH3C-VBR-MIB

Organization: New H3C Technologies Co., Ltd.

Last Updated: 2018-07-11

Category: Vendor: H3C/HH3C

Description: HH3C MIB for Virtual Bridge Router (VBR) providing management of bridged routing instances on H3C devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-VBR-MIB?

HH3C-VBR-MIB is a private H3C enterprise MIB for managing Virtual Bridge Router (VBR) groups used to control port extenders (PEXs) under the IEEE 802.1BR standard, which lets a central controller bridge manage remote extender ports as if they were local. It exposes configuration tables for VBR groups and their ID ranges, as well as tables for the cascade/CAS ports connecting extenders to the controller bridge. Monitoring with this MIB centers on the operational topology and software-defined structure of the extended bridge — confirming which VBR groups and port-extender associations are configured and active — rather than raw hardware sensors. Because 802.1BR extends standard bridging, this MIB depends conceptually on standard bridge/interface MIBs (e.g. IF-MIB) for the underlying port objects it references. It is deployed on H3C switches acting as controller bridges or port extenders in an 802.1BR fabric. Engineers can download the HH3C-VBR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-VBR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C switches (802.1BR controller bridges and port extenders)

Monitoring Examples

An operator can poll hh3cVbrGroupTable (via hh3cVbrGroupEntry, keyed by hh3cVbrGroupId) to check hh3cVbrGroupDescr and hh3cVbrGroupRowStatus, confirming which VBR groups are actively configured. hh3cVbrCasPortTable, indexed by hh3cVbrCasPortIndex, can be checked to verify cascade ports are correctly associated within the expected hh3cVbrMinAssociateId/hh3cVbrMaxAssociateId range. hh3cVbrTraps would notify the NMS of topology changes such as a port extender losing its cascade link.

What Can Be Monitored

VBR group configuration and status
VBR group ID range
cascade port associations
port extender association IDs
VBR topology change traps

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cVbr	1.3.6.1.4.1.25506.2.180			This MIB is used to manage port extenders (PEXs) over 802.1BR. This MIB is applicable to products that support PEXs.
hh3cVbrSpecInfo	1.3.6.1.4.1.25506.2.180.1
I32 hh3cVbrGroupMinId	1.3.6.1.4.1.25506.2.180.1.1	Integer32	read-only	Lowest PEX group ID that can be used to allocate ECIDs for ports on a PEX.
I32 hh3cVbrGroupMaxId	1.3.6.1.4.1.25506.2.180.1.2	Integer32	read-only	Highest PEX group ID that can be used to allocate ECID for ports on a PEX.
I32 hh3cVbrMinAssociateId	1.3.6.1.4.1.25506.2.180.1.3	Integer32	read-only	Lowest ID that can be assigned to a PEX.
I32 hh3cVbrMaxAssociateId	1.3.6.1.4.1.25506.2.180.1.4	Integer32	read-only	Highest ID that can be assigned to a PEX.
hh3cVbrTable	1.3.6.1.4.1.25506.2.180.2
hh3cVbrGroupTable	1.3.6.1.4.1.25506.2.180.2.1		not-accessible	This table contains objects used to configure PEX groups.
hh3cVbrGroupEntry	1.3.6.1.4.1.25506.2.180.2.1.1		not-accessible	Information about a PEX group.
I32 hh3cVbrGroupId	1.3.6.1.4.1.25506.2.180.2.1.1.1	Integer32	read-only	ID that can be used to uniquely identify a PEX group. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId.
STR hh3cVbrGroupDescr	1.3.6.1.4.1.25506.2.180.2.1.1.2	DisplayString	read-create	Description for the PEX group. The default value is 'pex-group XXXX', where 'XXXX' is hh3cVbrGroupId. Writing a zero-length string to this object resets the value to the default.
ROW hh3cVbrGroupRowStatus	1.3.6.1.4.1.25506.2.180.2.1.1.3	RowStatus	read-create	The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned.
hh3cVbrCasPortTable	1.3.6.1.4.1.25506.2.180.2.2		not-accessible	This table contains objects used to configure PEX cascade ports.
hh3cVbrCasPortEntry	1.3.6.1.4.1.25506.2.180.2.2.1		not-accessible	Information about a PEX cascade port.
I32 hh3cVbrCasPortIndex	1.3.6.1.4.1.25506.2.180.2.2.1.1	Integer32	accessible-for-notify	Interface index of the cascade port for a PEX.
I32 hh3cVbrCasPortAssociateId	1.3.6.1.4.1.25506.2.180.2.2.1.2	Integer32	read-create	ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. The value is 0xffff if the PEX is not assigned an ID. For a successful configuration, the ID must be unique among all PEXs in the IRF 3.1 system.
I32 hh3cVbrCasPortGroupID	1.3.6.1.4.1.25506.2.180.2.2.1.3	Integer32	read-create	PEX group ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId.
INT hh3cVbrPEXStatus	1.3.6.1.4.1.25506.2.180.2.2.1.4	INTEGER	read-only	Status of the PEX. If the value is offline, the PEX is absent or its configuration is incomplete. If the value is online, the PEX is operating correctly.
I32 hh3cVbrPEXTier	1.3.6.1.4.1.25506.2.180.2.2.1.5	Integer32	read-only	Tier of the PEX. The value is 0xffff if the upper-tier device of the PEX is not online.
STR hh3cVbrPEXDeviceMac	1.3.6.1.4.1.25506.2.180.2.2.1.6	DisplayString	read-only	Device MAC address of the PEX.
STR hh3cVbrPEXSysname	1.3.6.1.4.1.25506.2.180.2.2.1.7	DisplayString	read-only	Device name of the PEX.
STR hh3cVbrPEXBoardType	1.3.6.1.4.1.25506.2.180.2.2.1.8	DisplayString	read-only	Device board type of the PEX.
I32 hh3cVbrPEXParent	1.3.6.1.4.1.25506.2.180.2.2.1.9	Integer32	read-only	Upper-tier device of the PEX. The value is 0xffff if the upper-tier device of the PEX is the parent fabric(CB). In other situations, the value equals to the associated ID of the upper-tier PEX.
ROW hh3cVbrCasPortRowStatus	1.3.6.1.4.1.25506.2.180.2.2.1.10	RowStatus	read-create	The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned.
hh3cVbrUpgradeTable	1.3.6.1.4.1.25506.2.180.2.3		not-accessible	This table contains objects used to upgrade PEX software images or patches.
hh3cVbrUpgradeEntry	1.3.6.1.4.1.25506.2.180.2.3.1		not-accessible	Upgrade software for PEXs, including upgrading PEX software images by using an IPE file and installing or uninstalling PEX patches by using a patch file. Each time only one of the upgrading operations can be performed. The IPE file or the patch file must be saved in the flash:/pex_images directory on the parent fabric.
I32 hh3cVbrUpgradeAssociateId	1.3.6.1.4.1.25506.2.180.2.3.1.1	Integer32	not-accessible	ID assigned to a PEX. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. If the value is 0xffff,this object will upgrade software for all PEXs.
STR hh3cVbrUpgradeIPEFile	1.3.6.1.4.1.25506.2.180.2.3.1.2	DisplayString	read-write	The IPE file used to upgrade PEX software images. The file must be saved in the flash:/pex_images directory on the parent fabric.
STR hh3cVbrUpgradePatchFile	1.3.6.1.4.1.25506.2.180.2.3.1.3	DisplayString	read-write	The patch file used to install or uninstall PEX patches. The file must be saved in the flash:/pex_images directory on the parent fabric.
INT hh3cVbrUpgradePatchAction	1.3.6.1.4.1.25506.2.180.2.3.1.4	INTEGER	read-write	Action on patches in the patch file. The value active means to install the patches. The value deactive means to uninstall the patches.
INT hh3cVbrUpgradeStatus	1.3.6.1.4.1.25506.2.180.2.3.1.5	INTEGER	read-only	Result of the upgrading operation.
T/F hh3cVbrInitUpgradeStatus	1.3.6.1.4.1.25506.2.180.2.3.1.6	TruthValue	read-write	If you want to initialize the upgrade status, set the value of this object to enable.
hh3cVbrTraps	1.3.6.1.4.1.25506.2.180.3
hh3cVbrTrapPrefix	1.3.6.1.4.1.25506.2.180.3.0
NTF hh3cVbrPEXRemoveOrInsert	1.3.6.1.4.1.25506.2.180.3.0.1			An hh3cVbrPEXRemoveOrInsert notification is sent when a PEX is removed or inserted.

RFC description

H3C virtual bridge (VBR) MIB for managing port extenders (PEXs) over 802.1BR in H3C switches.

Start monitoring H3C switch (802.1BR port extenders/VBR groups) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-VBR-MIB

What Is HH3C-VBR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description