H3C-VOICE-DIAL-CONTROL-MIB

All MIBs › H3C-VOICE-DIAL-CONTROL-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2009-04-16

Category: Domain: VoIP/Telephony, Vendor: H3C/HH3C

Description: H3C MIB for voice dial control configuration managing dial peers and call routing on H3C voice gateways.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-VOICE-DIAL-CONTROL-MIB?

H3C-VOICE-DIAL-CONTROL-MIB is an H3C Technologies proprietary MIB (extending the standard DIAL-CONTROL-MIB) configuring voice dial-peer (entity) codec and fax parameters. Its entity-creation table records entity type and row status, and a common-configuration table records up to four preferred codecs, DSCP marking, VAD (Voice Activity Detection) enable, out-of-band signaling mode, and fax level/baud-rate/local-training-parameters/protocol/high-resolution-and-low-resolution packet counts/NSF-send-enable/training-mode/ECM/priority. As a configuration MIB it lets an administrator confirm a voice entity's codec preference order and fax-transmission parameters on an H3C voice gateway. It is deployed on H3C (3Com-Huawei) voice gateways. Engineers can download the H3C-VOICE-DIAL-CONTROL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-VOICE-DIAL-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (3Com-Huawei) voice gateways

Monitoring Examples

An administrator checks h3cVoEntityCfgCodec1st and h3cVoEntityCfgFaxProtocol to confirm codec preference and fax settings for a voice dial peer on an H3C voice gateway.

What Can Be Monitored

voice dial-peer codec preference and fax configuration

Imported Objects

From DIAL-CONTROL-MIB

AbsoluteCounter32

From HUAWEI-3COM-OID-MIB

h3cVoice

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cVoiceEntityControl	1.3.6.1.4.1.2011.10.2.39.14			This MIB file is to provide the definition of voice dial control configuration.
h3cVoEntityObjects	1.3.6.1.4.1.2011.10.2.39.14.1
h3cVoEntityCreateTable	1.3.6.1.4.1.2011.10.2.39.14.1.1		not-accessible	The table contains the voice entity information that is used to create an ifIndexed row.
h3cVoEntityCreateEntry	1.3.6.1.4.1.2011.10.2.39.14.1.1.1		not-accessible	The entry of h3cVoEntityCreateTable.
I32 h3cVoEntityIndex	1.3.6.1.4.1.2011.10.2.39.14.1.1.1.1	Integer32	not-accessible	An arbitrary index that uniquely identifies a voice entity.
INT h3cVoEntityType	1.3.6.1.4.1.2011.10.2.39.14.1.1.1.2	INTEGER	read-create	Specify the type of voice related encapsulation.
ROW h3cVoEntityRowStatus	1.3.6.1.4.1.2011.10.2.39.14.1.1.1.3	RowStatus	read-create	This object is used to create, delete or modify a row in this table. The h3cVoEntityType object should not be modified once the new row has been created.
h3cVoEntityCommonConfigTable	1.3.6.1.4.1.2011.10.2.39.14.1.2		not-accessible	This table contains the general voice entity information.
h3cVoEntityCommonConfigEntry	1.3.6.1.4.1.2011.10.2.39.14.1.2.1		not-accessible	The entry of h3cVoEntityCommonConfigTable.
I32 h3cVoEntityCfgIndex	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.1	Integer32	not-accessible	An arbitrary index that uniquely identifies a voice entity.
H3C h3cVoEntityCfgCodec1st	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.2	H3cCodecType	read-write	This object indicates the first desirable CODEC of speech of this dial entity.
H3C h3cVoEntityCfgCodec2nd	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.3	H3cCodecType	read-write	This object indicates the second desirable CODEC of speech of this dial entity.
H3C h3cVoEntityCfgCodec3rd	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.4	H3cCodecType	read-write	This object indicates the third desirable CODEC of speech of this dial entity.
H3C h3cVoEntityCfgCodec4th	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.5	H3cCodecType	read-write	This object indicates the forth desirable CODEC of speech of this dial entity.
I32 h3cVoEntityCfgDSCP	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.6	Integer32	read-write	This object indicates the DSCP(Different Service Code Point) value of voice packets.
T/F h3cVoEntityCfgVADEnable	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.7	TruthValue	read-write	This object indicates whether the VAD(Voice Activity Detection) is enabled.
H3C h3cVoEntityCfgOutbandMode	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.8	H3cOutBandMode	read-write	This object indicates the DTMF(Dual Tone Multi-Frequency) outband type of this dial entity.
I32 h3cVoEntityCfgFaxLevel	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.9	Integer32	read-write	This object indicates the fax level of this dial entity.
H3C h3cVoEntityCfgFaxBaudrate	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.10	H3cFaxBaudrateType	read-write	This object indicates the fax baudrate of this dial entity.
I32 h3cVoEntityCfgFaxLocalTrainPara	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.11	Integer32	read-write	This object indicates the fax local train threshold of this dial entity.
H3C h3cVoEntityCfgFaxProtocol	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.12	H3cFaxProtocolType	read-write	This object indicates the fax protocol of this dial entity.
I32 h3cVoEntityCfgFaxHRPackNum	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.13	Integer32	read-write	This object indicates the high speed redundancy packet numbers of t38 and standard-t38.
I32 h3cVoEntityCfgFaxLRPackNum	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.14	Integer32	read-write	This object indicates the low speed redundancy packet numbers of t38 and standard-t38.
T/F h3cVoEntityCfgFaxSendNSFEnable	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.15	TruthValue	read-write	This object indicates whether sends NSF(Non-Standard Faculty) to fax of this dial entity.
H3C h3cVoEntityCfgFaxTrainMode	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.16	H3cFaxTrainMode	read-write	This object indicates the fax train mode of this dial entity.
T/F h3cVoEntityCfgFaxEcm	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.17	TruthValue	read-write	This object indicates whether the ECM(Error Correct Mode) is enabled.
I32 h3cVoEntityCfgPriority	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.18	Integer32	read-write	This object indicates the priority of this dial entity.
OCT h3cVoEntityCfgDescription	1.3.6.1.4.1.2011.10.2.39.14.1.2.1.19	OCTET STRING	read-write	This object indicates the textual description of this dial entity.
h3cVoPOTSEntityConfigTable	1.3.6.1.4.1.2011.10.2.39.14.1.3		not-accessible	This table contains the POTS(Public Switched Telephone Network) entity information.
h3cVoPOTSEntityConfigEntry	1.3.6.1.4.1.2011.10.2.39.14.1.3.1		not-accessible	The entry of h3cVoPOTSEntityConfigTable.
I32 h3cVoPOTSEntityConfigIndex	1.3.6.1.4.1.2011.10.2.39.14.1.3.1.1	Integer32	not-accessible	An arbitrary index that uniquely identifies a voice entity.
OCT h3cVoPOTSEntityConfigPrefix	1.3.6.1.4.1.2011.10.2.39.14.1.3.1.2	OCTET STRING	read-write	This object indicates the prefix which is added to the called number.
OCT h3cVoPOTSEntityConfigSubLine	1.3.6.1.4.1.2011.10.2.39.14.1.3.1.3	OCTET STRING	read-write	This object indicates the voice subscriber line of this dial entity.
I32 h3cVoPOTSEntityConfigSendNum	1.3.6.1.4.1.2011.10.2.39.14.1.3.1.4	Integer32	read-write	This object indicates the digit of phone number to be sent to the destination. 0..31: Number of digits (that are extracted from the end of a number) to be sent, in the range of 0 to 31. It is not greater than the total number of digits of the called number. 65534: Sends all digits of a called number. 65535: Sends a truncated called number.
h3cVoVoIPEntityConfigTable	1.3.6.1.4.1.2011.10.2.39.14.1.4		not-accessible	This table contains the VoIP entity information.
h3cVoVoIPEntityConfigEntry	1.3.6.1.4.1.2011.10.2.39.14.1.4.1		not-accessible	The entry of h3cVoVoIPEntityConfigTable.
I32 h3cVoVoIPEntityCfgIndex	1.3.6.1.4.1.2011.10.2.39.14.1.4.1.1	Integer32	not-accessible	An arbitrary index that uniquely identifies a voice entity.
INT h3cVoVoIPEntityCfgTargetType	1.3.6.1.4.1.2011.10.2.39.14.1.4.1.2	INTEGER	read-write	This object indicates the type of the session target of this entity.
IPt h3cVoVoIPEntityCfgTargetAddrType	1.3.6.1.4.1.2011.10.2.39.14.1.4.1.3	InetAddressType	read-write	The IP address type of object h3cVoVoIPEntityCfgTargetAddr.
IP h3cVoVoIPEntityCfgTargetAddr	1.3.6.1.4.1.2011.10.2.39.14.1.4.1.4	InetAddress	read-write	This object indicates the target IP address.
h3cVoEntityNumberTable	1.3.6.1.4.1.2011.10.2.39.14.1.5		not-accessible	The table contains the number management information.
h3cVoEntityNumberEntry	1.3.6.1.4.1.2011.10.2.39.14.1.5.1		not-accessible	The entry of h3cVoEntityNumberTable. H3cVoEntityIndex is used to uniquely identify these numbers registered on the server. The same value of h3cVoEntityIndex used in the corresponding H3CVoEntityCommonConfigTable is used here.
OCT h3cVoEntityNumberAuthUser	1.3.6.1.4.1.2011.10.2.39.14.1.5.1.1	OCTET STRING	read-write	This object indicates the username of the entity number to authorize.
I32 h3cVoEntityNumberPasswordType	1.3.6.1.4.1.2011.10.2.39.14.1.5.1.2	Integer32	read-write	This object indicates the password type of the entity number to authorize. The encrypting type of password: 0 : password simple, means password is clean text. 1 : password cipher, means password is encrypted text. default is 65535.
OCT h3cVoEntityNumberPassword	1.3.6.1.4.1.2011.10.2.39.14.1.5.1.3	OCTET STRING	read-write	This object indicates the password of the entity number to authorize.
H3C h3cVoEntityNumberStatus	1.3.6.1.4.1.2011.10.2.39.14.1.5.1.4	H3cRegisterdStatus	read-only	This object indicates the current state of the entity number.
I32 h3cVoEntityNumberExpires	1.3.6.1.4.1.2011.10.2.39.14.1.5.1.5	Integer32	read-only	This is the interval time for entity number updating registered message.

RFC description

Voice dial control configuration for POTS and VoIP entity management and codec selection.

Start monitoring H3C voice gateway (dial-peer codec/fax parameters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-VOICE-DIAL-CONTROL-MIB

What Is H3C-VOICE-DIAL-CONTROL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description