H3C-FTM-MIB

All MIBs › H3C-FTM-MIB

Organization: HUAWEI-3COM TECHNOLOGIES.

Last Updated: 2004-01-13

Category: Technology: Stacking, Vendor: H3C/HH3C

Description: H3C MIB for Fabric Topology Management (FTM) in IRF stacking systems managing inter-device fabric links.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-FTM-MIB?

This H3C vendor MIB supports Fabric Topology Management (FTM) for H3C's IRF (Intelligent Resilient Framework) stacking technology, which lets multiple physical switches operate as a single logical fabric/stack. It exposes unit-level identity data (unit ID, unit name) and fabric authentication settings governing how member switches join and authenticate within the IRF fabric. Its monitoring value is centered on the software/topology health of the stack, confirming each stack member's identity and authentication status to detect misconfigured or unauthorized units attempting to join the fabric, which is essential for stack stability and security. It is tightly coupled to H3C's proprietary IRF stacking architecture and likely depends on or complements other H3C stack-management MIBs. It is deployed on H3C switches configured in an IRF stack/fabric topology in enterprise or data center networks. Engineers can download the H3C-FTM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-FTM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C switches configured in IRF (Intelligent Resilient Framework) stacking mode

Monitoring Examples

An administrator would poll unit-id and unit-name objects to confirm all expected member switches are correctly recognized within the IRF fabric topology. Fabric authentication status objects would be checked to verify a new member switch properly authenticated before joining the stack, flagging any unit that failed authentication as a potential misconfiguration or security concern. Unexpected changes in unit membership detected via this MIB would prompt investigation into a possible split-fabric or cabling issue between stack members.

What Can Be Monitored

stack unit ID and name
fabric authentication status
IRF stack membership
fabric topology state

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cFtm	1.3.6.1.4.1.2011.10.2.1
h3cFtmManMIB	1.3.6.1.4.1.2011.10.2.1.1			this mib will maintain Fabric topology management. The mib includes unit-id, unit-name and fabric authentication information.
h3cFtmManMIBObjects	1.3.6.1.4.1.2011.10.2.1.1.1
h3cFtmUnitTable	1.3.6.1.4.1.2011.10.2.1.1.1.1		not-accessible	A table of informations of XRN-Fabric Unit.
h3cFtmUnitEntry	1.3.6.1.4.1.2011.10.2.1.1.1.1.1		not-accessible	An entry for configuring unit informations of XRN-Fabric.
I32 h3cFtmIndex	1.3.6.1.4.1.2011.10.2.1.1.1.1.1.1	Integer32	accessible-for-notify	The unique index of a unit.
INT h3cFtmUnitID	1.3.6.1.4.1.2011.10.2.1.1.1.1.1.2	INTEGER	read-write	Identifer of unit in fabric. Its value should be between 1 and the maximum which defines in product specification. An exception is described in description of h3cFtmNumberMode. In that case, the value of this object remains its original value after set to zero.
OCT h3cFtmUnitName	1.3.6.1.4.1.2011.10.2.1.1.1.1.1.3	OCTET STRING	read-write	Name of unit in XRN-Fabric. It consists of no more than 64 characters.
INT h3cFtmUnitRole	1.3.6.1.4.1.2011.10.2.1.1.1.1.1.4	INTEGER	read-only	Role of unit in XRN-Fabric. One unit in a XRN-Fabric acts as master role and others act as slave roles
INT h3cFtmNumberMode	1.3.6.1.4.1.2011.10.2.1.1.1.1.1.5	INTEGER	read-only	Numbering Mode of unit in XRN-Fabric. If the unit ID is assigned by the auto numbering algorithm, the numbering mode will be automatic numbering; if the unit ID (h3cFtmUnitID) is assigned by the user, the numbering mode will be manual numbering; if h3cFtmUnitID is set to be zero, the numbering mode will become automatic numbering.
INT h3cFtmAuthMode	1.3.6.1.4.1.2011.10.2.1.1.1.2	INTEGER	read-write	Authentication mode of XRN-Fabric.
OCT h3cFtmAuthValue	1.3.6.1.4.1.2011.10.2.1.1.1.3	OCTET STRING	read-write	Authentication value of XRN-Fabric Feature. ftm_none mode means no authentication. In simple mode, the value is password of a string of 1 to 16 charactors. While in md5 mode, the value is key of a string within 16 charactors.
INT h3cFtmFabricVlanID	1.3.6.1.4.1.2011.10.2.1.1.1.4	INTEGER	read-write	The object is used for get and set the Fabric VlanID. Only is the equipment not in the stacking status, the value can be set.
INT h3cFtmFabricType	1.3.6.1.4.1.2011.10.2.1.1.1.5	INTEGER	read-only	Topology type of Fabric. outofStack means this unit is not in stack.
h3cFtmManMIBComformance	1.3.6.1.4.1.2011.10.2.1.1.2
h3cFtmMIBCompliances	1.3.6.1.4.1.2011.10.2.1.1.2.1
h3cFtmMIBCompliance	1.3.6.1.4.1.2011.10.2.1.1.2.1.1			The compliance statement for FTM implementing the MIB.
h3cFtmMIBGroups	1.3.6.1.4.1.2011.10.2.1.1.2.2
h3cFtmConfigGroup	1.3.6.1.4.1.2011.10.2.1.1.2.2.1			The basic collection of objects for sending trap of FTM Management.
h3cFtmNotificationGroup	1.3.6.1.4.1.2011.10.2.1.1.2.2.2			The basic collection of objects for sending trap of FTM Management.
h3cFtmManMIBNotification	1.3.6.1.4.1.2011.10.2.1.1.3
NTF h3cFtmUnitIDChange	1.3.6.1.4.1.2011.10.2.1.1.3.1			When unit id changes in fabric, this trap is sent with unit index and its new id .
NTF h3cFtmUnitNameChange	1.3.6.1.4.1.2011.10.2.1.1.3.2			When unit name changes in fabric, this trap is sent with unit index and its new name.

RFC description

H3C fabric topology management for XRN-Fabric units including unit configuration and authentication.

Start monitoring H3C switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-FTM-MIB

What Is H3C-FTM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description