H3C-DOT11S-MESH-MIB

All MIBs › H3C-DOT11S-MESH-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2009-08-01

Category: Technology: Wireless, Vendor: H3C/HH3C

Description: Covers management of 802.11s wireless mesh networks on H3C devices, including mesh points, links, and topology information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-DOT11S-MESH-MIB?

H3C-DOT11S-MESH-MIB is an H3C private-enterprise MIB for managing IEEE 802.11s wireless mesh networking, covering mesh key distributor services, mesh profiles, and mesh point policies used to form a self-configuring wireless backhaul among access points. It exposes mesh profile configuration data such as mesh ID, keep-alive interval, backhaul rate, and profile enable/row-status, along with the state of the mesh key distributor security service. Its monitoring emphasis is wireless configuration and mesh-topology/link health rather than classic hardware sensors: an operator tracks mesh profile status and backhaul parameters to confirm the mesh backhaul is correctly configured and operational. It builds on the IEEE 802.11 wireless standard and typically complements other WLAN/AP MIBs used for radio-level statistics. Deployment context is H3C wireless access points and access controllers forming mesh backhaul networks in outdoor, campus, or SOHO wireless deployments. Engineers can download the H3C-DOT11S-MESH-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-DOT11S-MESH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C wireless access point / access controller (802.11s mesh)

Monitoring Examples

An administrator polls h3cDot11sMeshPflTable/h3cDot11sMeshPflEntry, indexed by h3cDot11sMeshPflIndex, to inspect h3cDot11sMeshPflMeshID, h3cDot11sMeshPflKeepAlive, and h3cDot11sMeshPflBackhaulRate for a given mesh profile, confirming h3cDot11sMeshPflEnable and h3cDot11sMeshPflRowStatus show the profile as active. h3cDot11sMeshMkdServEnable is checked to verify the mesh key distributor (security) service is running, which would explain authentication failures on the mesh backhaul if disabled unexpectedly.

What Can Be Monitored

mesh profile enable state
mesh ID
keep-alive interval
backhaul rate
mesh key distributor service state
mesh profile row status

Imported Objects

From H3C-DOT11-REF-MIB

H3cDot11RadioElementIndex
h3cDot11	MODULE-IDENTITY
h3cDot11APElementIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cDot11sMeshLinkRxTotByte OID:

Select an H3C wireless access point/controller (802.11s mesh backhaul) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cDot11sMeshLinkRxTotByte into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the amount of bytes that the mesh link received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cDot11sMesh	1.3.6.1.4.1.2011.10.2.75.11			The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
h3cDot11sConfigGroup	1.3.6.1.4.1.2011.10.2.75.11.1
h3cDot11sMeshGlobalPara	1.3.6.1.4.1.2011.10.2.75.11.1.1
MAC h3cDot11sMeshMkdID	1.3.6.1.4.1.2011.10.2.75.11.1.1.1	MacAddress	read-write	This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.
h3cDot11sMeshPflTable	1.3.6.1.4.1.2011.10.2.75.11.1.2		not-accessible	This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except h3cDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio.
h3cDot11sMeshPflEntry	1.3.6.1.4.1.2011.10.2.75.11.1.2.1		not-accessible	Each entry contains information of a mesh profile.
I32 h3cDot11sMeshPflIndex	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.1	Integer32	not-accessible	This object represents the index of the mesh profile.
OCT h3cDot11sMeshPflMeshID	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.2	OCTET STRING	read-create	This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, h3cDot11sMeshPflEnable can not be set to 'true'.
I32 h3cDot11sMeshPflBindIntNum	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.3	Integer32	read-create	This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of h3cDot11sMeshPflEnable can not be set to 'true'.
I32 h3cDot11sMeshPflKeepAlive	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.4	Integer32	read-create	This object represents the mesh link keep-alive interval.
I32 h3cDot11sMeshPflBackhaulRate	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.5	Integer32	read-create	This object represents the link backhaul rate.
T/F h3cDot11sMeshMkdServEnable	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.6	TruthValue	read-create	This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.
T/F h3cDot11sMeshPflEnable	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.7	TruthValue	read-create	This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.
ROW h3cDot11sMeshPflRowStatus	1.3.6.1.4.1.2011.10.2.75.11.1.2.1.8	RowStatus	read-create	The status of this table entry.
h3cDot11sMpPlcyTable	1.3.6.1.4.1.2011.10.2.75.11.1.3		not-accessible	This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio.
h3cDot11sMpPlcyEntry	1.3.6.1.4.1.2011.10.2.75.11.1.3.1		not-accessible	Each entry contains information of a MP policy.
I32 h3cDot11sMpPlcyIndex	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.1	Integer32	not-accessible	This object represents the MP policy index.
OCT h3cDot11sMpPlcyName	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.2	OCTET STRING	read-create	This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.
T/F h3cDot11sMpPlcyInitEnable	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.3	TruthValue	read-create	This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.
T/F h3cDot11sMlspEnable	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.4	TruthValue	read-create	This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.
I32 h3cDot11sProbReqInterval	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.5	Integer32	read-create	This object represents the probe request interval.
T/F h3cDot11sRoleAuthEnable	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.6	TruthValue	read-create	This object indicates whether the device can play as the role of an authenticator.
I32 h3cDot11sLinkHoldRSSI	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.7	Integer32	read-create	This object represents the link-hold receive signal strength indicator (RSSI).
I32 h3cDot11sLinkHoldTime	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.8	Integer32	read-create	This object represents the link-hold time.
I32 h3cDot11sSwitchMargin	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.9	Integer32	read-create	This object represents the link-switch margin.
I32 h3cDot11sLinkSaturationRSSI	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.10	Integer32	read-create	This object represents the link saturation receive signal strength indicator (RSSI).
INT h3cDot11sLinkRateMode	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.11	INTEGER	read-create	This object represents the rate mode of the mesh link.
I32 h3cDot11sMaxLinkNum	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.12	Integer32	read-create	This object represents the maximum number of the mesh link.
ROW h3cDot11sMpPlcyRowStatus	1.3.6.1.4.1.2011.10.2.75.11.1.3.1.13	RowStatus	read-create	The status of this table entry.
h3cDot11sMlspCfgTable	1.3.6.1.4.1.2011.10.2.75.11.1.4		not-accessible	This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified.
h3cDot11sMlspCfgEntry	1.3.6.1.4.1.2011.10.2.75.11.1.4.1		not-accessible	Each entry contains information of MLSP proxy MAC address.
I32 h3cDot11sMlspProxyIndex	1.3.6.1.4.1.2011.10.2.75.11.1.4.1.1	Integer32	not-accessible	This object represents the MLSP proxy MAC address index.
MAC h3cDot11sMlspProxyMac	1.3.6.1.4.1.2011.10.2.75.11.1.4.1.2	MacAddress	read-create	This object represents the MLSP proxy MAC address.
ROW h3cDot11sMlspRowStatus	1.3.6.1.4.1.2011.10.2.75.11.1.4.1.3	RowStatus	read-create	The status of this table entry.
h3cDot11sRadioCfgTable	1.3.6.1.4.1.2011.10.2.75.11.1.5		not-accessible	This table is used to configure mesh to the specified radio.
h3cDot11sRadioCfgEntry	1.3.6.1.4.1.2011.10.2.75.11.1.5.1		not-accessible	Each entry contains mesh configure information of the specified radio.
H3C h3cDot11sCfgRadioIndex	1.3.6.1.4.1.2011.10.2.75.11.1.5.1.1	H3cDot11RadioElementIndex	not-accessible	Represents index of the radio.
I32 h3cDot11sMeshPflMap	1.3.6.1.4.1.2011.10.2.75.11.1.5.1.2	Integer32	read-write	This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.
I32 h3cDot11sMpPlcyMap	1.3.6.1.4.1.2011.10.2.75.11.1.5.1.3	Integer32	read-write	This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.
h3cDot11sAPCfgTable	1.3.6.1.4.1.2011.10.2.75.11.1.6		not-accessible	This table is used to configure mesh to the specified AP.
h3cDot11sAPCfgEntry	1.3.6.1.4.1.2011.10.2.75.11.1.6.1		not-accessible	Each entry contains mesh configure information of the specified AP.
T/F h3cDot11sPortalEnable	1.3.6.1.4.1.2011.10.2.75.11.1.6.1.1	TruthValue	read-write	This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.
h3cDot11sWDSConfigGroup	1.3.6.1.4.1.2011.10.2.75.11.2
h3cDot11sWDSPeerMacTable	1.3.6.1.4.1.2011.10.2.75.11.2.1		not-accessible	This table is used to configure wireless distribution system (WDS). The row of this table can not be modified.
h3cDot11sWDSPeerMacEntry	1.3.6.1.4.1.2011.10.2.75.11.2.1.1		not-accessible	Each entry contains information of WDS.
I32 h3cDot11sWDSPeerMacIndex	1.3.6.1.4.1.2011.10.2.75.11.2.1.1.1	Integer32	not-accessible	This object represents the peer MAC address index.
MAC h3cDot11sWDSPeerMacAddrss	1.3.6.1.4.1.2011.10.2.75.11.2.1.1.2	MacAddress	read-create	This object represents the peer MAC address.
ROW h3cDot11sWDSPeerMacRowStatus	1.3.6.1.4.1.2011.10.2.75.11.2.1.1.3	RowStatus	read-create	The status of this table entry.
h3cDot11sMeshStatusGroup	1.3.6.1.4.1.2011.10.2.75.11.3
h3cDot11sMeshLinkStatusTable	1.3.6.1.4.1.2011.10.2.75.11.3.1		not-accessible	This table is used to represent the status of mesh link.
h3cDot11sMeshLinkStatusEntry	1.3.6.1.4.1.2011.10.2.75.11.3.1.1		not-accessible	Each entry contains status information of mesh link.
U32 h3cDot11sMeshLinkIfIndex	1.3.6.1.4.1.2011.10.2.75.11.3.1.1.1	Unsigned32	not-accessible	This object represents the interface index of the mesh link.
OCT h3cDot11sMeshLinkName	1.3.6.1.4.1.2011.10.2.75.11.3.1.1.2	OCTET STRING	read-only	This object represents the name of the mesh link.
MAC h3cDot11sMeshLinkBSSID	1.3.6.1.4.1.2011.10.2.75.11.3.1.1.3	MacAddress	read-only	This object represents the BSS ID of the mesh link.
MAC h3cDot11sMeshLinkPeerMac	1.3.6.1.4.1.2011.10.2.75.11.3.1.1.4	MacAddress	read-only	This object represents the peer MAC address of the mesh link.
I32 h3cDot11sMeshLinkExistDuration	1.3.6.1.4.1.2011.10.2.75.11.3.1.1.5	Integer32	read-only	This object represents the time for which the link has been up.
h3cDot11sMeshLinkStatisTable	1.3.6.1.4.1.2011.10.2.75.11.3.2		not-accessible	This table is used to represent the statistical information of mesh link.
h3cDot11sMeshLinkStatisEntry	1.3.6.1.4.1.2011.10.2.75.11.3.2.1		not-accessible	Each entry contains statistical information of mesh link.
U32 h3cDot11sMeshLinkStatIfIndex	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.1	Unsigned32	not-accessible	This object represents the interface index of the mesh link.
U32 h3cDot11sMeshLinkNbrIndex	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.2	Unsigned32	read-only	Represents the neighbor index of the mesh link.
C32 h3cDot11sMeshLinkRxTotByteEx	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.3	Counter32	read-only	Represents the amount of bytes that the mesh link received.
C32 h3cDot11sMeshLinkRxTotPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.4	Counter32	read-only	Represents the amount of packets that the mesh link received.
C32 h3cDot11sMeshLinkRxUniPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.5	Counter32	read-only	Represents the amount of unicast packets that the mesh link received.
C32 h3cDot11sMeshLinkRxBrocPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.6	Counter32	read-only	Represents the amount of broadcast packets that the mesh link received.
C32 h3cDot11sMeshLinkRxMuticPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.7	Counter32	read-only	Represents the amount of multicast packets that the mesh link received.
C32 h3cDot11sMeshLinkRxDiscPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.8	Counter32	read-only	Represents the amount of packets that the mesh link discarded.
C32 h3cDot11sMeshLinkTxTotByte	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.9	Counter32	read-only	Represents the total amount of bytes that the mesh link transmitted.
C32 h3cDot11sMeshLinkTxTotPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.10	Counter32	read-only	Represents the total amount of packets that the mesh link transmitted.
C32 h3cDot11sMeshLinkTxUniPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.11	Counter32	read-only	Represents the amount of unicast packets that the mesh link transmitted.
C32 h3cDot11sMeshLinkTxBrocPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.12	Counter32	read-only	Represents the amount of broadcast packets that the mesh link transmitted.
C32 h3cDot11sMeshLinkTxMuticPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.13	Counter32	read-only	Represents the amount of multicast packets that the mesh link transmitted.
C32 h3cDot11sMeshLinkTxDiscPkt	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.14	Counter32	read-only	Represents the amount of discarded packets that the mesh link transmitted.
OCT h3cDot11sMeshLinkIFName	1.3.6.1.4.1.2011.10.2.75.11.3.2.1.15	OCTET STRING	read-only	Represents the name of mesh link interface.
h3cDot11sMeshNbrStatusTable	1.3.6.1.4.1.2011.10.2.75.11.3.3		not-accessible	This table represents the status information for the neighbors of MP.
h3cDot11sMeshNbrStatusEntry	1.3.6.1.4.1.2011.10.2.75.11.3.3.1		not-accessible	Each entry of the table will provide status information for the neighbors of MP.
U32 h3cDot11sMeshNbrIndex	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.1	Unsigned32	not-accessible	Represents the index for the neighbor.
U32 h3cDot11sMeshNbrRadioID	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.2	Unsigned32	read-only	Represents the radio ID of the neighbor.
OCT h3cDot11sMeshLocalMeshID	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.3	OCTET STRING	read-only	Represents the local mesh ID.
OCT h3cDot11sMeshNbrMeshID	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.4	OCTET STRING	read-only	Represents the mesh ID of the neighbor.
MAC h3cDot11sMeshNbrBSSID	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.5	MacAddress	read-only	Represents the BSS ID of the neighbor.
MAC h3cDot11sMeshNbrPeerMac	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.6	MacAddress	read-only	Represents the MAC address of the peer neighbor.
U32 h3cDot11sMeshLinkInMp	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.7	Unsigned32	read-only	Represents the interface index of mesh link that used to connect with this neighbor.
INT h3cDot11sMeshMPLinkStatus	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.8	INTEGER	read-only	Represents the status of mesh link that used to connect with this neighbor.
U32 h3cDot11sMeshNbrChannel	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.9	Unsigned32	read-only	Represents the channel number used by this neighbor.
I32 h3cDot11sMeshNbrLinkDuration	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.10	Integer32	read-only	Represents the duration of mesh link that used to connect with this neighbor.
I32 h3cDot11sMeshNbrRSSI	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.11	Integer32	read-only	Represents the RSSI of mesh link that used to connect with this neighbor.
I32 h3cDot11sMeshNbrSNR	1.3.6.1.4.1.2011.10.2.75.11.3.3.1.12	Integer32	read-only	Represents the SNR of mesh link that used to connect with this neighbor.

RFC description

H3C MIB for 802.11s wireless mesh network management including mesh points, links, and topology information.

Start monitoring H3C wireless access point/controller (802.11s mesh backhaul) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-DOT11S-MESH-MIB