H3C-COMMON-SYSTEM-MIB

All MIBs › H3C-COMMON-SYSTEM-MIB

Category: Device Management, Vendor: H3C/HH3C

Description: H3C common system MIB providing general device management objects for system identification and operational status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-COMMON-SYSTEM-MIB?

H3C-COMMON-SYSTEM-MIB is H3C's general-purpose device management MIB providing common system identification and operational status objects shared across the H3C product line. No module description or sample objects were available in the source data, so its precise object set cannot be confirmed, but MIBs of this name/type typically expose system identity (model, serial), overall device operational status, and possibly basic resource indicators. Where such objects exist, they would let administrators confirm a device is operating normally and identify it uniquely within an inventory system, a baseline hardware/software status check. It likely serves as a foundational MIB that other H3C-specific MIBs, such as H3C-CFCARD-MIB or H3C-NET-MAN-MIB, build upon or reference for common conventions. It is deployed across the H3C router and switch product line as a shared system-management building block, and administrators managing that product line typically start with an H3C-COMMON-SYSTEM-MIB download to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-COMMON-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C router/switch (general device management)

Monitoring Examples

No sample objects were provided in the source data, so no concrete monitoring scenario can be described without inventing object names; the actual MIB source would need to be consulted to identify real system-identity or status objects.

Imported Objects

From HUAWEI-3COM-OID-MIB

hwSystem

OBJECT-IDENTITY

From SNMPv2-SMI

NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString

How to Use in IPNetwork Monitor

Example using hwSysBootType OID:

Select an H3C router/switch (general system management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwSysBootType into the Find box to locate it in the OID tree, then select it and click OK. The boot type of the system whether the last device reboot was by CLI (warm start) or power off (cold start). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'warmStart', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT hwWriteConfig	1.3.6.1.4.1.2011.10.6.5	INTEGER	read-write	Write config to router.
INT hwStartFtpServer	1.3.6.1.4.1.2011.10.6.6	INTEGER	read-write	Decide whether start ftp-server.enable(1) indicates to start ftp-server; disable(2) indicates to stop ftp-server.
INT hwReboot	1.3.6.1.4.1.2011.10.6.7	INTEGER	read-write	Reboot router.
hwSystemNotification	1.3.6.1.4.1.2011.10.6.8
NTF hwWriteSuccessTrap	1.3.6.1.4.1.2011.10.6.8.1			send a trap about write success.
NTF hwWriteFailureTrap	1.3.6.1.4.1.2011.10.6.8.2			send a trap about write failure.
NTF hwRebootSendTrap	1.3.6.1.4.1.2011.10.6.8.3			When users restart the device with command 'reboot', this trap will be sent two seconds before the device reboots.
NTF hwSysColdStartTrap	1.3.6.1.4.1.2011.10.6.8.4			A system cold start trap.
NTF hwSysWarmStartTrap	1.3.6.1.4.1.2011.10.6.8.5			A system warm start trap.
STR hwSoftwareVersion	1.3.6.1.4.1.2011.10.6.9	DisplayString	read-only	Software version.
INT hwSysBootTypeEx	1.3.6.1.4.1.2011.10.6.10	INTEGER	read-only	The boot type of the system whether the last device reboot was by CLI (warm start) or power off (cold start).
hwSystemInfo	1.3.6.1.4.1.2011.10.6.11
INT hwSysStatisticPeriod	1.3.6.1.4.1.2011.10.6.11.1	INTEGER	read-write	The statistic period. The device collects statistics within the period.
INT hwSysSamplePeriod	1.3.6.1.4.1.2011.10.6.11.2	INTEGER	read-write	The sampling period. The device takes samples periodically for statistics collection.
INT hwSysTrapResendPeriod	1.3.6.1.4.1.2011.10.6.11.3	INTEGER	read-write	The trap resending period. If the value is zero, the trap will not be re-sent.
INT hwSysTrapCollectionPeriod	1.3.6.1.4.1.2011.10.6.11.4	INTEGER	read-write	The trap collecting period. If the value is zero, the trap will not be re-sent.
INT hwSysSnmpPort	1.3.6.1.4.1.2011.10.6.11.5	INTEGER	read-only	UDP port for SNMP protocol entity to receive messages except Trap-PDU.
INT hwSysSnmpTrapPort	1.3.6.1.4.1.2011.10.6.11.6	INTEGER	read-only	UDP port for Trap-PDU to receive messages.
OCT hwSysNetID	1.3.6.1.4.1.2011.10.6.11.7	OCTET STRING	read-write	The system Net ID.
DAT hwSysLastSampleTime	1.3.6.1.4.1.2011.10.6.11.8	DateAndTime	read-only	The last sample local time of the system.
INT hwSysTrapSendNum	1.3.6.1.4.1.2011.10.6.11.9	INTEGER	read-write	The trap send times. If the value is zero, the trap will be sent all the time if it occurs.
TIK hwSysFirstTrapTime	1.3.6.1.4.1.2011.10.6.11.10	TimeTicks	accessible-for-notify	Represents the first trap time.

RFC description

Manages common system operations including reboot, FTP server, configuration, and system traps on H3C/Huawei routers and switches.

Start monitoring H3C router/switch (general system management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-COMMON-SYSTEM-MIB

What Is H3C-COMMON-SYSTEM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description