G6-MISC-MIB

All MIBs › G6-MISC-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Vendor: MICROSENS

Description: MICROSENS G6 switch MIB providing miscellaneous system management objects not covered by dedicated MIBs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-MISC-MIB?

G6-MISC-MIB is a MICROSENS private MIB for the Generation 6 switch family that collects miscellaneous system configuration objects not covered by the other dedicated G6 MIBs, most notably terminal server (serial-over-IP) settings. It exposes a table of terminal server configuration entries covering device name, operating mode, remote IP and TCP port, inactivity timeout, and serial line parameters (data rate, data bits, parity, stop bits). Its monitoring/configuration value is centered on the switch's serial console redirection feature, letting an admin verify a connected serial device is reachable over the network with matching line settings, which is a software/configuration-status concern rather than physical hardware health. No explicit dependency on other MIBs is indicated; it is a catch-all module within the broader G6 private MIB suite. It is deployed on MICROSENS G6-series switches used to provide network access to serial-console-managed equipment in industrial or infrastructure settings. Engineers can download the G6-MISC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-MISC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6-series Ethernet switch

Monitoring Examples

An admin would poll terminalServerConfigTable/terminalServerConfigEntry via terminalServerConfigRemoteIp and terminalServerConfigTcpPort to confirm a serial device is reachable at the expected network address, and check terminalServerConfigDataRate, terminalServerConfigDatabits, and terminalServerConfigParity against the connected equipment's serial settings if the console session shows garbled output. terminalServerConfigInactivityTimeout would be checked if sessions are dropping unexpectedly soon.

What Can Be Monitored

terminal server (serial-over-IP) configuration
remote IP/TCP port for serial redirection
serial line parameters (baud rate, parity, stop bits)
inactivity timeout

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
management	1.3.6.1.4.1.3181.10.6.3			Microsens private MIB for Generation 6 Ethernet Switches
misc	1.3.6.1.4.1.3181.10.6.3.78
terminalServerConfigTable	1.3.6.1.4.1.3181.10.6.3.78.1		not-accessible	This section defines setting for the terminal server feature.
terminalServerConfigEntry	1.3.6.1.4.1.3181.10.6.3.78.1.1		not-accessible
INT terminalServerConfigIndex	1.3.6.1.4.1.3181.10.6.3.78.1.1.1	INTEGER	not-accessible	Automatically generated
STR terminalServerConfigDeviceName	1.3.6.1.4.1.3181.10.6.3.78.1.1.2	DisplayString	read-write	Descriptive name for customer reference. This name is echoed upon login.
INT terminalServerConfigMode	1.3.6.1.4.1.3181.10.6.3.78.1.1.3	INTEGER	read-write	Defines the operational mode of the terminal server.
OCT terminalServerConfigRemoteIp	1.3.6.1.4.1.3181.10.6.3.78.1.1.4	OCTET STRING	read-write	IP address of the associated remote partner. Only applies in CLIENT and COM_PORT mode.
I32 terminalServerConfigTcpPort	1.3.6.1.4.1.3181.10.6.3.78.1.1.5	Integer32	read-write	Defines the TCP port number under which the terminal server is reachable.
I32 terminalServerConfigInactivityTimeout	1.3.6.1.4.1.3181.10.6.3.78.1.1.6	Integer32	read-write	An unattended terminal server logs off automatically after specified seconds. Use 0 to disable timeout.
INT terminalServerConfigDataRate	1.3.6.1.4.1.3181.10.6.3.78.1.1.7	INTEGER	read-write	Data rate in bits per second.
INT terminalServerConfigDatabits	1.3.6.1.4.1.3181.10.6.3.78.1.1.8	INTEGER	read-write	Number of data bits per character.
INT terminalServerConfigParity	1.3.6.1.4.1.3181.10.6.3.78.1.1.9	INTEGER	read-write	Defines if the parity bit is used.
INT terminalServerConfigStopBits	1.3.6.1.4.1.3181.10.6.3.78.1.1.10	INTEGER	read-write	Number of stop bits per character.
INT terminalServerConfigFlowControl	1.3.6.1.4.1.3181.10.6.3.78.1.1.11	INTEGER	read-write	Determines if flow control is used.
I32 terminalServerConfigForwardingTimer	1.3.6.1.4.1.3181.10.6.3.78.1.1.12	Integer32	read-write	Defined in 100ms steps. After no more data are received for this time, the serial data are forwarded to the ethernet side. (VTIME)
I32 terminalServerConfigCharacterCount	1.3.6.1.4.1.3181.10.6.3.78.1.1.13	Integer32	read-write	At least this many character must be received before data are forwarded. Set to zero to ignore count. (VMIN)
INT terminalServerConfigForwardingCharacter	1.3.6.1.4.1.3181.10.6.3.78.1.1.14	INTEGER	read-write	When the specified character is received o the serial port, the tcp packet is forwarded.
speakerConfigTable	1.3.6.1.4.1.3181.10.6.3.78.2		not-accessible	This section defines settings for an optional network addressed loudspeaker. Wav or mps3 files may be played out. Local sound files or network music files can be accessed. Not that WAV files must be provided in the format as required by the selected source. With mp3 on-the-fly transcoding is available.
speakerConfigEntry	1.3.6.1.4.1.3181.10.6.3.78.2.1		not-accessible
INT speakerConfigIndex	1.3.6.1.4.1.3181.10.6.3.78.2.1.1	INTEGER	not-accessible	Automatically generated
STR speakerConfigPlay	1.3.6.1.4.1.3181.10.6.3.78.2.1.2	DisplayString	read-write	Play a sound file or stream. A local sould file must reside in the sound folder accessible via ftp. Syntax: .play = mysound.mp3 Alternatively a remote file or stream may be played in the format: .play = http://webradiostream.mp3
STR speakerConfigStop	1.3.6.1.4.1.3181.10.6.3.78.2.1.3	DisplayString	read-write	Cancels all sound output.
STR speakerConfigVolume	1.3.6.1.4.1.3181.10.6.3.78.2.1.4	DisplayString	read-write	Volume control if possible for this device.
STR speakerConfigDeviceName	1.3.6.1.4.1.3181.10.6.3.78.2.1.5	DisplayString	read-write	Descriptive name for customer reference.
INT speakerConfigDeviceType	1.3.6.1.4.1.3181.10.6.3.78.2.1.6	INTEGER	read-write	Select type or protocol of desired speaker.
U32 speakerConfigOutputRate	1.3.6.1.4.1.3181.10.6.3.78.2.1.7	Unsigned32	read-write	Output (re)sample rate only applies to MP3 files or streams. Default value 44100.
INT speakerConfigOutputFormat	1.3.6.1.4.1.3181.10.6.3.78.2.1.8	INTEGER	read-write	Mono Stereo conversion only applies to mp3 files or streams.
STR speakerConfigHostAddress	1.3.6.1.4.1.3181.10.6.3.78.2.1.9	DisplayString	read-write	IP address or symbolic name of the speaker
I32 speakerConfigUdpPort	1.3.6.1.4.1.3181.10.6.3.78.2.1.10	Integer32	read-write	UDP port for

RFC description

Provides miscellaneous management objects for MICROSENS G6 generation Ethernet switches including terminal server configuration settings.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (terminal server/serial-over-IP config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-MISC-MIB

What Is G6-MISC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description