G6-VLAN-MIB

All MIBs › G6-VLAN-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Technology: VLAN, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for VLAN configuration, port membership, and 802.1Q tagging management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-VLAN-MIB?

G6-VLAN-MIB is a MICROSENS private MIB for Generation 6 Ethernet switches covering VLAN configuration, including 802.1Q filtering, per-purpose VLAN IDs (management, voice, RSTP, unauthorized/guest, SmartOffice), and per-port VLAN membership. It exposes a global VLAN filtering enable flag, an ID-configuration table assigning special-purpose VLAN IDs, and a port configuration table for VLAN membership/tagging per port. This is a configuration-status MIB useful for confirming VLAN segmentation is correctly applied, particularly whether management traffic, voice traffic, and spanning-tree traffic are isolated onto their intended VLANs. It naturally interoperates with G6-PORT-MIB (port identity) and standard 802.1Q concepts, though not explicitly stated as a formal MIB dependency. It is deployed on MICROSENS G6 switches in any network segmented by VLANs for security or traffic-separation purposes. Engineers can download the G6-VLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Ethernet switch

Monitoring Examples

An administrator would check vlanEnableVlanFiltering and vlanIdConfigManagementVlanId in vlanIdConfigTable to confirm management traffic is isolated to the correct VLAN, and vlanIdConfigVoiceVlanId to verify VoIP phones are being placed on the voice VLAN as expected. vlanIdConfigUnauthorizedVlanId would be checked when investigating why an unauthenticated device landed on an unexpected VLAN, and portConfigTable would be reviewed to confirm a specific port's VLAN membership matches intended design. vlanIdConfigRstpVlanId ties VLAN assignment to the spanning-tree configuration.

What Can Be Monitored

VLAN filtering enable state
management/voice/RSTP VLAN assignment
unauthorized/guest VLAN assignment
per-port VLAN membership

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
protocol	1.3.6.1.4.1.3181.10.6.2			Microsens private MIB for Generation 6 Ethernet Switches
vlan	1.3.6.1.4.1.3181.10.6.2.82
INT vlanEnableVlanFiltering	1.3.6.1.4.1.3181.10.6.2.82.1	INTEGER	read-write	Generally enable VLAN filtering function:
vlanIdConfigTable	1.3.6.1.4.1.3181.10.6.2.82.2		not-accessible	This section defines some default VLAN settings.
vlanIdConfigEntry	1.3.6.1.4.1.3181.10.6.2.82.2.1		not-accessible
INT vlanIdConfigIndex	1.3.6.1.4.1.3181.10.6.2.82.2.1.1	INTEGER	not-accessible	Automatically generated
I32 vlanIdConfigManagementVlanId	1.3.6.1.4.1.3181.10.6.2.82.2.1.2	Integer32	read-write	VLAN ID for internal management port. Packets sent by the management agent are tagged with this VLAN ID,
INT vlanIdConfigManagementPriority	1.3.6.1.4.1.3181.10.6.2.82.2.1.3	INTEGER	read-write	VLAN Priority for internal management port. Packets sent by the internal management agent are tagged with this priority value.
I32 vlanIdConfigVoiceVlanId	1.3.6.1.4.1.3181.10.6.2.82.2.1.4	Integer32	read-write	Voice VLAN ID. Special VLAN for IP phones.
I32 vlanIdConfigRstpVlanId	1.3.6.1.4.1.3181.10.6.2.82.2.1.5	Integer32	read-write	RSTP VLAN ID. When using single instance Spanning Tree (STP or RSTP) in combination with VLANs, all spanning tree messages are tagged with this VLAN ID.
I32 vlanIdConfigUnauthorizedVlanId	1.3.6.1.4.1.3181.10.6.2.82.2.1.6	Integer32	read-write	When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN.
I32 vlanIdConfigSmartofficeVlanId	1.3.6.1.4.1.3181.10.6.2.82.2.1.7	Integer32	read-write	VLAN ID used for SmartOffice control traffic between director and controllers. Also used by the SmartOffice GUI.
portConfigTable	1.3.6.1.4.1.3181.10.6.2.82.3		not-accessible	These settings define the default VLANs per port and defines how untagged data are treated.
portConfigEntry	1.3.6.1.4.1.3181.10.6.2.82.3.1		not-accessible
INT portConfigPortIndex	1.3.6.1.4.1.3181.10.6.2.82.3.1.1	INTEGER	not-accessible	Automatically generated
INT portConfigVlanMode	1.3.6.1.4.1.3181.10.6.2.82.3.1.2	INTEGER	read-write	Defines how the VLAN tag of incoming and outgoing packets shall be handled on port.
I32 portConfigDefaultVlanId	1.3.6.1.4.1.3181.10.6.2.82.3.1.3	Integer32	read-write	Default VLAN ID for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
INT portConfigForceDefaultVlanId	1.3.6.1.4.1.3181.10.6.2.82.3.1.4	INTEGER	read-write	When enabled, incoming packets with existing VLAN tag are overwritten with the default port VLAN ID.
INT portConfigDefaultPriority	1.3.6.1.4.1.3181.10.6.2.82.3.1.5	INTEGER	read-write	Default priority value for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
INT portConfigPriorityOverride	1.3.6.1.4.1.3181.10.6.2.82.3.1.6	INTEGER	read-write	When enabled, incoming packets with existing VLAN tag are overwritten with the default priority value.
I32 portConfigUnauthorizedVlanId	1.3.6.1.4.1.3181.10.6.2.82.3.1.7	Integer32	read-write	When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN. When set to 0 the global vlan_id_config.unauthorized_vlan_id parameter applies. Use this parameter to set an independend port specific unauthorized vlan.
I32 portConfigFallbackVlanId	1.3.6.1.4.1.3181.10.6.2.82.3.1.8	Integer32	read-write	When using port access control with dynamic VLANs and a RADIUS server, the fallback vlan is assigned when the RADIUS server is unavailable. If this parameter is set to 0 the unauthorized vlan is used instead. If this is also 0 then the global vlan_id_config.unauthorized_vlan_id parameter applies.
INT portConfigQInQEthertype	1.3.6.1.4.1.3181.10.6.2.82.3.1.9	INTEGER	read-write	Ethertype configuration only applies for vlan_mode Q_IN_Q.
filterConfigTable	1.3.6.1.4.1.3181.10.6.2.82.4		not-accessible	Defines the used VLANs and their associated ports.
filterConfigEntry	1.3.6.1.4.1.3181.10.6.2.82.4.1		not-accessible
INT filterConfigIndex	1.3.6.1.4.1.3181.10.6.2.82.4.1.1	INTEGER	not-accessible	Automatically generated
STR filterConfigVlanId	1.3.6.1.4.1.3181.10.6.2.82.4.1.2	DisplayString	read-write	Defines filter table entry for this VLAN ID. This is the key value for the table. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.
INT filterConfigEntryMode	1.3.6.1.4.1.3181.10.6.2.82.4.1.3	INTEGER	read-write	When disabled, filtering for this VLAN ID is disabled without deleting the table entry. This can be used for testing and configuration.
STR filterConfigAlias	1.3.6.1.4.1.3181.10.6.2.82.4.1.4	DisplayString	read-write	User-definable name string for VLAN.
I32 filterConfigMstpGroup	1.3.6.1.4.1.3181.10.6.2.82.4.1.5	Integer32	read-write	All filter entries with the same mstp_group number will share an MSTP instance. A group may consist of one or many vlan entries. A value of 0 indicates that MSTP is not used for this VLAN.
U32 filterConfigFabricAttachISid	1.3.6.1.4.1.3181.10.6.2.82.4.1.6	Unsigned32	read-write	This parameter defines the VLAN to I-SID binding when the shortest path bridging (SPB) fabric attach feature is used.
INT filterConfigPortMembers	1.3.6.1.4.1.3181.10.6.2.82.4.1.7	INTEGER	read-write	Defines port memberships for VLAN. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
INT filterConfigManagementMembers	1.3.6.1.4.1.3181.10.6.2.82.4.1.8	INTEGER	read-write	Defines the port membership for the internal management port(s).
INT filterConfigPriorityOverride	1.3.6.1.4.1.3181.10.6.2.82.4.1.9	INTEGER	read-write	When enabled the priority value of packets tagged with this VLAN is overwritten with the new_priority value.
INT filterConfigNewPriority	1.3.6.1.4.1.3181.10.6.2.82.4.1.10	INTEGER	read-write	VLAN priority value when priority_override is enabled.
INT vlanEnableMvrp	1.3.6.1.4.1.3181.10.6.2.82.5	INTEGER	read-write	Generally enable MVRP (Multiple VLAN Reservation Protocol) function. MVRP is operational on 802.1q trunk ports only.
mvrpPortConfigTable	1.3.6.1.4.1.3181.10.6.2.82.6		not-accessible	Configuration parameter concerning the port specific MVRP setttings.
mvrpPortConfigEntry	1.3.6.1.4.1.3181.10.6.2.82.6.1		not-accessible
INT mvrpPortConfigPortIndex	1.3.6.1.4.1.3181.10.6.2.82.6.1.1	INTEGER	not-accessible	Automatically generated
INT mvrpPortConfigEnableMvrp	1.3.6.1.4.1.3181.10.6.2.82.6.1.2	INTEGER	read-write	Enable MVRP (Multiple VLAN Reservation Protocol) on this port.
INT mvrpPortConfigRegistrationMode	1.3.6.1.4.1.3181.10.6.2.82.6.1.3	INTEGER	read-write	Configuration of the MVRP registration mode.
U32 mvrpPortConfigJoinTimer	1.3.6.1.4.1.3181.10.6.2.82.6.1.4	Unsigned32	read-write	Number of milliseconds that the interface must wait before sending MVRP PDUs.
U32 mvrpPortConfigLeaveTimer	1.3.6.1.4.1.3181.10.6.2.82.6.1.5	Unsigned32	read-write	Number of milliseconds that the switch retains a VLAN in the Leave state before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval.
U32 mvrpPortConfigLeaveallTimer	1.3.6.1.4.1.3181.10.6.2.82.6.1.6	Unsigned32	read-write	Number of milliseconds between the sending of Leave All messages.
fabricAttachPortConfigTable	1.3.6.1.4.1.3181.10.6.2.82.7		not-accessible	Configuration parameter controling the fabric attach feature. Each port can be configured individually.
fabricAttachPortConfigEntry	1.3.6.1.4.1.3181.10.6.2.82.7.1		not-accessible
INT fabricAttachPortConfigPortIndex	1.3.6.1.4.1.3181.10.6.2.82.7.1.1	INTEGER	not-accessible	Automatically generated
INT fabricAttachPortConfigEnableFabricAttach	1.3.6.1.4.1.3181.10.6.2.82.7.1.2	INTEGER	read-write	Shortest path bridging (SPB) fabric attach feature can be used to simplify configuration in an SBP enabled network. Please also generally enable the LLDP function to use this feature. When enabled the port will act as client to a fabric attach network.
INT fabricAttachPortConfigMsgAuthentication	1.3.6.1.4.1.3181.10.6.2.82.7.1.3	INTEGER	read-write	when enabled message authentication using the fa_auth key is used.
STR fabricAttachPortConfigEnterFaAuthKey	1.3.6.1.4.1.3181.10.6.2.82.7.1.4	DisplayString	read-write	Enter the fabric attach authentication keys required to access the network. No spaces are permitted.
STR fabricAttachPortConfigEncryptedFaAuthKey	1.3.6.1.4.1.3181.10.6.2.82.7.1.5	DisplayString	read-write	Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
I32 vlanNumberOfEntries	1.3.6.1.4.1.3181.10.6.2.82.100	Integer32	read-only	Number of VLAN entries in the table.
statusTable	1.3.6.1.4.1.3181.10.6.2.82.101		not-accessible	This table lists the status of all defined VLANs.
statusEntry	1.3.6.1.4.1.3181.10.6.2.82.101.1		not-accessible
INT statusVlanIndex	1.3.6.1.4.1.3181.10.6.2.82.101.1.1	INTEGER	not-accessible	Automatically generated
I32 statusVlanId	1.3.6.1.4.1.3181.10.6.2.82.101.1.2	Integer32	read-only	VLAN identifier
U32 statusTimeMark	1.3.6.1.4.1.3181.10.6.2.82.101.1.3	Unsigned32	read-only
STR statusAlias	1.3.6.1.4.1.3181.10.6.2.82.101.1.4	DisplayString	read-only	Contains the alias name for static entries.
INT statusPortMembers	1.3.6.1.4.1.3181.10.6.2.82.101.1.5	INTEGER	read-only	Lists all ports that belong to this VLAN.
U32 statusFilterDatabase	1.3.6.1.4.1.3181.10.6.2.82.101.1.6	Unsigned32	read-only	filter data base
INT statusEgressPorts	1.3.6.1.4.1.3181.10.6.2.82.101.1.7	INTEGER	read-only	The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
INT statusUntaggedPorts	1.3.6.1.4.1.3181.10.6.2.82.101.1.8	INTEGER	read-only	The set of ports which are transmitting traffic for this VLAN as untagged frames.
INT statusFabricAttachState	1.3.6.1.4.1.3181.10.6.2.82.101.1.9	INTEGER	read-only	Indicates if auto attachment to the fabric was successful.
INT statusCreationMode	1.3.6.1.4.1.3181.10.6.2.82.101.1.10	INTEGER	read-only	Indicates by which means this VLAN entry was created.
C32 statusCreationTime	1.3.6.1.4.1.3181.10.6.2.82.101.1.11	Counter32	read-only	The value of system.uptime when this VLAN was created.
portStatusTable	1.3.6.1.4.1.3181.10.6.2.82.102		not-accessible	Port related view of the currently active VLAN setup.
portStatusEntry	1.3.6.1.4.1.3181.10.6.2.82.102.1		not-accessible
INT portStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.82.102.1.1	INTEGER	not-accessible	Automatically generated
STR portStatusAssignedVlanIds	1.3.6.1.4.1.3181.10.6.2.82.102.1.2	DisplayString	read-only	List of all VLAN ids that are configured or dynamically assigned to this port.
I32 portStatusDynamicDefaultVlanId	1.3.6.1.4.1.3181.10.6.2.82.102.1.3	Integer32	read-only	Indicates the current port default VLAN. The value may change due to port authentication or configuration.
INT portStatusLastUpdateMethod	1.3.6.1.4.1.3181.10.6.2.82.102.1.4	INTEGER	read-only	Indicates what caused the last VLAN reconfiguration.
MAC portStatusLastUpdatingMac	1.3.6.1.4.1.3181.10.6.2.82.102.1.5	MacAddress	read-only	Indicates which MAC address, if any, was involve in changing the VLAN setting for this port last.
C32 portStatusLastUpdateTime	1.3.6.1.4.1.3181.10.6.2.82.102.1.6	Counter32	read-only	Indicates the time when the VLAN settings were last changed.
mvrpStatusTable	1.3.6.1.4.1.3181.10.6.2.82.103		not-accessible	This table lists MVRP status information.
mvrpStatusEntry	1.3.6.1.4.1.3181.10.6.2.82.103.1		not-accessible
INT mvrpStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.82.103.1.1	INTEGER	not-accessible	Automatically generated
MAC mvrpStatusLastSourceMac	1.3.6.1.4.1.3181.10.6.2.82.103.1.2	MacAddress	read-only	The Source MAC Address of the last MVRP message received on this port.
U32 mvrpStatusFailedRegistrations	1.3.6.1.4.1.3181.10.6.2.82.103.1.3	Unsigned32	read-only	The total number of failed MVRP registrations, for any reason, on this port.

RFC description

Microsens private MIB for Generation 6 Ethernet Switches providing VLAN configuration and filtering management.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-VLAN-MIB

What Is G6-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description