All MIBs › Fib-sys › pfmSystemSlipIpAddr
pfmSystemSlipIpAddr
Module: Fib-sys
OID (symbolic): Fib-sys::pfmSystemSlipIpAddr
OID (numeric): 1.3.6.1.4.1.22.51.1.2.15
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: SLIP IP address This is object is available only when slip interface exist
What is pfmSystemSlipIpAddr?
This is the permanent (saved) IP address for the card's SLIP interface, applied on the next boot, available only on cards that have a SLIP interface. An admin sets this to persistently reconfigure the serial-line IP address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.15 snmpwalk -v2c -c public <target> Fib-sys::pfmSystemSlipIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.15.1 snmpget -v2c -c public <target> Fib-sys::pfmSystemSlipIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.1.2.15.1 a <value>
Start monitoring Fibronics networking equipment (legacy trap-address learning table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fib-sys::pfmSystemSlipIpAddr OID value, configure state conditions and alerts, and monitor any Fibronics networking equipment (legacy trap-address learning table) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.51 | fm800 | EDB-snmp |
| 1.3.6.1.4.1.22.51.1 | fmsystem | EDB-snmp |
| 1.3.6.1.4.1.22.51.1.2 | fmsystemperm | EDB-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.51.1.2.15 | pfmSystemSlipIpAddr | Fib-sys |