Fib-sys :: pfmSystemSlipIPNetMask

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Fib-sys › pfmSystemSlipIPNetMask

pfmSystemSlipIPNetMask

Module: Fib-sys

OID (symbolic): Fib-sys::pfmSystemSlipIPNetMask

OID (numeric): 1.3.6.1.4.1.22.51.1.2.16

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: SLIP IP Network Mask This is object is available only when slip interface exist

What is pfmSystemSlipIPNetMask?

This is the permanent (saved) network mask for the card's SLIP interface, applied on the next boot, available only on cards that have a SLIP interface. An admin sets this together with pfmSystemSlipIpAddr to persistently reconfigure the SLIP subnet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.16
snmpwalk -v2c -c public <target> Fib-sys::pfmSystemSlipIPNetMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.16.1
snmpget -v2c -c public <target> Fib-sys::pfmSystemSlipIPNetMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.1.2.16.1 a <value>

Start monitoring Fibronics networking equipment (legacy trap-address learning table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fib-sys::pfmSystemSlipIPNetMask OID value, configure state conditions and alerts, and monitor any Fibronics networking equipment (legacy trap-address learning table) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22spartacusCMU-MIB
1.3.6.1.4.1.22.51fm800EDB-snmp
1.3.6.1.4.1.22.51.1fmsystemEDB-snmp
1.3.6.1.4.1.22.51.1.2fmsystempermEDB-snmp
Numeric OIDNameModule
1.3.6.1.4.1.22.51.1.2.16pfmSystemSlipIPNetMaskFib-sys