All MIBs › Fib-sys › pfmSystemSlipBaudRate
pfmSystemSlipBaudRate
Module: Fib-sys
OID (symbolic): Fib-sys::pfmSystemSlipBaudRate
OID (numeric): 1.3.6.1.4.1.22.51.1.2.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: SLIP Baud rate This is object is available only when slip interface exist
What is pfmSystemSlipBaudRate?
This sets the permanent (saved) baud rate (baud1200 through baud38400) for the card's SLIP interface, applied on the next boot, available only on cards that have a SLIP interface. An admin sets this to match the far-end serial device's speed persistently across reboots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.17 snmpwalk -v2c -c public <target> Fib-sys::pfmSystemSlipBaudRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.1.2.17.1 snmpget -v2c -c public <target> Fib-sys::pfmSystemSlipBaudRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.1.2.17.1 i <value>
Start monitoring Fibronics networking equipment (legacy trap-address learning table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fib-sys::pfmSystemSlipBaudRate OID value, configure state conditions and alerts, and monitor any Fibronics networking equipment (legacy trap-address learning table) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.51 | fm800 | EDB-snmp |
| 1.3.6.1.4.1.22.51.1 | fmsystem | EDB-snmp |
| 1.3.6.1.4.1.22.51.1.2 | fmsystemperm | EDB-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.51.1.2.17 | pfmSystemSlipBaudRate | Fib-sys |