All MIBs › Fib-sys › fmDiagDebug
fmDiagDebug
Module: Fib-sys
OID (symbolic): Fib-sys::fmDiagDebug
OID (numeric): 1.3.6.1.4.1.22.51.5.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is for factory use only. Users must not write into this variable or improper operation can occur.
What is fmDiagDebug?
This switches the card between normal-mode(1) and debug-mode(2), and the DESCRIPTION explicitly warns it is for factory use only since writing to it can cause improper operation. An admin should leave this at normal-mode(1) and never set it without vendor guidance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4 snmpwalk -v2c -c public <target> Fib-sys::fmDiagDebug
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4.1 snmpget -v2c -c public <target> Fib-sys::fmDiagDebug.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.5.4.1 i <value>
Start monitoring Fibronics networking equipment (legacy trap-address learning table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Fib-sys::fmDiagDebug OID value, configure state conditions and alerts, and monitor any Fibronics networking equipment (legacy trap-address learning table) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | spartacus | CMU-MIB |
| 1.3.6.1.4.1.22.51 | fm800 | EDB-snmp |
| 1.3.6.1.4.1.22.51.5 | fmdiag | EDB-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.51.5.4 | fmDiagDebug | Fib-sys |