FORTINET-FORTIVOICE-MIB

All MIBs › FORTINET-FORTIVOICE-MIB

Organization: Fortinet Technologies, Inc.

Last Updated: 2014-01-30

Category: Domain: Telephony/VoIP, Domain: VoIP/Telephony, Vendor: Fortinet

Description: Fortinet FortiVoice MIB providing SNMP management objects for the FortiVoice unified communications and IP PBX appliance status and call statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FORTINET-FORTIVOICE-MIB?

FORTINET-FORTIVOICE-MIB is a Fortinet proprietary module for the FortiVoice unified communications and IP PBX appliance, providing SNMP management objects layered on top of the shared FORTINET-CORE-MIB and adding FortiVoice-specific traps. Its data spans general appliance status inherited from the core Fortinet MIB framework combined with call-related statistics and event traps specific to voice services. Its monitoring role covers both hardware/platform health (via the inherited core objects, typically including CPU, memory, and system uptime) and software/service status specific to VoIP call handling, such as call volume and service-affecting trap conditions, making it useful for confirming the PBX appliance is both healthy as a device and functioning correctly as a voice service. It explicitly depends on FORTINET-CORE-MIB for its base object structure and inherits Fortinet's common enterprise MIB conventions. It is deployed in enterprise environments running Fortinet FortiVoice appliances as an on-premises IP PBX/unified communications system. Engineers can download the FORTINET-FORTIVOICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FORTINET-FORTIVOICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fortinet FortiVoice IP PBX appliance

Monitoring Examples

Because no sample objects were provided beyond the module description, specific object or table names cannot be confirmed from the source; typical usage would involve polling core Fortinet system-health objects (CPU, memory, uptime) inherited via FORTINET-CORE-MIB alongside FortiVoice-specific call statistics objects, and watching for FortiVoice traps signaling a call-processing fault, which together would reveal whether the appliance is both operationally healthy and successfully handling voice traffic.

What Can Be Monitored

system CPU/memory/uptime (inherited from core MIB)
call statistics
FortiVoice-specific fault traps

Imported Objects

From FORTINET-CORE-MIB

FnBoolState
FnIndex
FnSessionProto
fortinet	MODULE-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using fvSysCpuUsage OID:

Select a Fortinet FortiVoice IP PBX/unified communications appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fvSysCpuUsage into the Find box to locate it in the OID tree, then select it and click OK. Instantaneous CPU usage. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fnFortiVoiceMib	1.3.6.1.4.1.12356.115			Inherit FORTINET-CORE-MIB, combine FortiVoice traps
fvTraps	1.3.6.1.4.1.12356.115.0
NTF fvTrapStorageDiskHighThreshold	1.3.6.1.4.1.12356.115.0.104			Trap being sent if the storage disk usage becomes too high
NTF fvTrapSystemEvent	1.3.6.1.4.1.12356.115.0.201			Trap being sent when the system component halt, reboot, upgrade etc.,
NTF fvTrapHAEvent	1.3.6.1.4.1.12356.115.0.203			Trap being sent when HA event occurs
fvSystem	1.3.6.1.4.1.12356.115.1
STR fvSysModel	1.3.6.1.4.1.12356.115.1.1	DisplayString	read-only	System model string
STR fvSysSerial	1.3.6.1.4.1.12356.115.1.2	DisplayString	read-only	Device serial number
STR fvSysVersion	1.3.6.1.4.1.12356.115.1.3	DisplayString	read-only	Device firmware version
G32 fvSysCpuUsageEx	1.3.6.1.4.1.12356.115.1.6	Gauge32	read-only	Instantaneous CPU usage
G32 fvSysMemUsage	1.3.6.1.4.1.12356.115.1.7	Gauge32	read-only	Instantaneous memory utilization
G32 fvSysLogDiskUsage	1.3.6.1.4.1.12356.115.1.8	Gauge32	read-only	Instantaneous log disk usage
G32 fvSysStorageDiskUsage	1.3.6.1.4.1.12356.115.1.9	Gauge32	read-only	Instantaneous storage disk usage
FVS fvSysEventCode	1.3.6.1.4.1.12356.115.1.11	FvSysEventCodeVal	accessible-for-notify	System component events
FVH fvHAEventId	1.3.6.1.4.1.12356.115.1.14	FvHAEventIdVal	accessible-for-notify	HA event type ID
IP fvHAUnitIp	1.3.6.1.4.1.12356.115.1.15	IpAddress	accessible-for-notify	Unit IP address where event occurs
STR fvHAEventReason	1.3.6.1.4.1.12356.115.1.16	DisplayString	accessible-for-notify	The reason for the HA event
G32 fvSysLoad	1.3.6.1.4.1.12356.115.1.30	Gauge32	read-only	Instantaneous system load
fvSysHA	1.3.6.1.4.1.12356.115.1.200
FVH fvHAMode	1.3.6.1.4.1.12356.115.1.200.1	FvHAModeVal	read-only	Configured HA mode
FVH fvHAEffectiveMode	1.3.6.1.4.1.12356.115.1.200.2	FvHAModeVal	read-only	Effective HA mode
fvMIBConformance	1.3.6.1.4.1.12356.115.600
fvSystemConformanceGroup	1.3.6.1.4.1.12356.115.600.1			object related to fortivoice system.
fvHAModeConformanceGroup	1.3.6.1.4.1.12356.115.600.6			object related to fortivoice HA mode.
fvTrapsComplianceGroup	1.3.6.1.4.1.12356.115.600.7			Event notifications
fvMIBCompliance	1.3.6.1.4.1.12356.115.600.100			the compliance statement for the application MIB.

RFC description

Monitors Fortinet FortiVoice VoIP systems with system traps and event notifications.

Start monitoring Fortinet FortiVoice IP PBX/unified communications appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FORTINET-FORTIVOICE-MIB