FORCE10-SYSTEM-COMPONENT-MIB

All MIBs › FORCE10-SYSTEM-COMPONENT-MIB

Organization: Dell Inc

Last Updated: 2011-08-02

Category: Hardware and Environment, Vendor: Dell

Description: Dell Force10 Networks system component MIB providing inventory and status objects for chassis modules, line cards, and FPGAs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FORCE10-SYSTEM-COMPONENT-MIB?

FORCE10-SYSTEM-COMPONENT-MIB is a Dell Inc (Force10 Networks, Dell Networking OS) proprietary MIB reporting CAM (Content-Addressable Memory, hardware forwarding-table) usage per line card. Its overall CAM-usage table, keyed by slot/pipe/partition, records partition description and total/used entries, while an L2-specific table breaks out ingress/egress ACL and ingress FIB (forwarding information base) usage by slot/pipe, and an L3 table covers ingress FIB and ingress system-flow usage. As a hardware-performance MIB it lets an administrator watch hardware CAM-table utilization per line card to catch an approaching forwarding-table exhaustion before routes/ACLs start being rejected. It is deployed on Dell Force10 (Dell Networking OS) switches/routers. Engineers can download the FORCE10-SYSTEM-COMPONENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FORCE10-SYSTEM-COMPONENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Force10 (Dell Networking OS) switches/routers

Monitoring Examples

An administrator monitors camUsageL3IngFibUsed against camUsageL3Table's total to catch approaching FIB exhaustion on a Dell Force10 line card before new routes are rejected.

What Can Be Monitored

hardware CAM-table utilization per line card

Imported Objects

From FORCE10-SMI

f10Mgmt

OBJECT-IDENTITY

From FORCE10-TC

F10CamPartitionType

From RFC1213-MIB

DisplayString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
f10SysComponentMib	1.3.6.1.4.1.6027.3.7			Dell Networking OS System component MIB. Dell Networking OS System component allow user to view the SW information of a component in the system. Currently, the available component information that are avaibale are 1) CAM Entries on linecard - Overall system CAM usage table - L2 Ingress or Egress CAM Usage - L3 Ingress or Egress CAM Usage - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms)
f10SysComponentObjects	1.3.6.1.4.1.6027.3.7.1
f10CamEntries	1.3.6.1.4.1.6027.3.7.1.1
camUsageTable	1.3.6.1.4.1.6027.3.7.1.1.1		not-accessible	A table of general CAM usages table.
camUsageEntry	1.3.6.1.4.1.6027.3.7.1.1.1.1		not-accessible	A table of CAM usage table. The table show the different partition of CAM
I32 camUsageSlot	1.3.6.1.4.1.6027.3.7.1.1.1.1.1	Integer32	not-accessible	The slot number of linecard where the CAM is located
I32 camUsagePipeNum	1.3.6.1.4.1.6027.3.7.1.1.1.1.2	Integer32	not-accessible	The port pipe number on the linecard where the CAM is located
F10 camUsagePartId	1.3.6.1.4.1.6027.3.7.1.1.1.1.3	F10CamPartitionType	not-accessible	The partition id of the CAM on the line card.
STR camUsagePartDesc	1.3.6.1.4.1.6027.3.7.1.1.1.1.4	DisplayString	read-only	The description of the CAM partition id.
I32 camUsageTotal	1.3.6.1.4.1.6027.3.7.1.1.1.1.5	Integer32	read-only	The total cam size allocated to this CAM partition
I32 camUsageUsed	1.3.6.1.4.1.6027.3.7.1.1.1.1.6	Integer32	read-only	The total cam used or configured to this CAM partition
camUsageL2Table	1.3.6.1.4.1.6027.3.7.1.1.2		not-accessible	A table of Layer 2 or switch layer CAM usages table.
camUsageL2Entry	1.3.6.1.4.1.6027.3.7.1.1.2.1		not-accessible	A table of Layer 2 (switch layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress.
I32 camUsageL2Slot	1.3.6.1.4.1.6027.3.7.1.1.2.1.1	Integer32	not-accessible	The slot number of linecard where the CAM is located
I32 camUsageL2PipeId	1.3.6.1.4.1.6027.3.7.1.1.2.1.2	Integer32	not-accessible	The port pipe number on the linecard where the CAM is located
I32 camUsageL2IngAclTotal	1.3.6.1.4.1.6027.3.7.1.1.2.1.3	Integer32	read-only	The total cam size allocated to layer 2 ingress ACL
I32 camUsageL2IngAclUsed	1.3.6.1.4.1.6027.3.7.1.1.2.1.4	Integer32	read-only	The total cam used or configured in layer 2 ingress ACL
I32 camUsageL2IngFibTotal	1.3.6.1.4.1.6027.3.7.1.1.2.1.7	Integer32	read-only	The total cam size allocated to layer 2 ingress FIB
I32 camUsageL2IngFibUsed	1.3.6.1.4.1.6027.3.7.1.1.2.1.8	Integer32	read-only	The total cam used or configured in layer 2 ingress FIB
I32 camUsageL2EgrAclTotal	1.3.6.1.4.1.6027.3.7.1.1.2.1.9	Integer32	read-only	The total cam size allocated to layer 2 Egress ACL
I32 camUsageL2EgrAclUsed	1.3.6.1.4.1.6027.3.7.1.1.2.1.10	Integer32	read-only	The total cam used or configured in layer 2 Egress Acl
camUsageL3Table	1.3.6.1.4.1.6027.3.7.1.1.3		not-accessible	A table of Layer 3 or router layer CAM usages table.
camUsageL3Entry	1.3.6.1.4.1.6027.3.7.1.1.3.1		not-accessible	A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress.
I32 camUsageL3Slot	1.3.6.1.4.1.6027.3.7.1.1.3.1.1	Integer32	not-accessible	The slot number of linecard where the CAM is located
I32 camUsageL3PipeId	1.3.6.1.4.1.6027.3.7.1.1.3.1.2	Integer32	not-accessible	The port pipe number on the linecard where the CAM is located
I32 camUsageL3IngFibTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.3	Integer32	read-only	The total cam size allocated to layer 3 ingress FIB
I32 camUsageL3IngFibUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.4	Integer32	read-only	The total cam used or configured in layer 3 ingress FIB
I32 camUsageL3IngSysFlowTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.5	Integer32	read-only	The total cam size allocated to layer 3 ingress system flow
I32 camUsageL3IngSysFlowUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.6	Integer32	read-only	The total cam used or configured in layer 3 ingress system flow
I32 camUsageL3IngTrcListTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.7	Integer32	read-only	The total cam size allocated to layer 3 ingress trace list
I32 camUsageL3IngTrcListUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.8	Integer32	read-only	The total cam used or configured in layer 3 ingress trace list
I32 camUsageL3IngMcastFibTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.9	Integer32	read-only	The total cam size allocated to layer 3 ingress multicast FIB
I32 camUsageL3IngMcastFibUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.10	Integer32	read-only	The total cam used or configured in layer 3 ingress multicast FIB
I32 camUsageL3IngQosTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.11	Integer32	read-only	The total cam size allocated to layer 3 ingress QOS
I32 camUsageL3IngQosUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.12	Integer32	read-only	The total cam used or configured in layer 3 ingress QOS
I32 camUsageL3IngPbrTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.13	Integer32	read-only	The total cam size allocated to layer 3 ingress PBR
I32 camUsageL3IngPbrUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.14	Integer32	read-only	The total cam used or configured in layer 3 ingress QOS
I32 camUsageL3IngAclTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.15	Integer32	read-only	The total cam size allocated to layer 3 ingress ACL
I32 camUsageL3IngAclUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.16	Integer32	read-only	The total cam used or configured in layer 3 ingress ACL
I32 camUsageL3EgrAclTotal	1.3.6.1.4.1.6027.3.7.1.1.3.1.17	Integer32	read-only	The total cam size allocated to layer 3 egress ACL
I32 camUsageL3EgrAclUsed	1.3.6.1.4.1.6027.3.7.1.1.3.1.18	Integer32	read-only	The total cam used or configured in layer 3 egress ACL
camUsageL3ExtTable	1.3.6.1.4.1.6027.3.7.1.1.4		not-accessible	A table of Layer 3 or router layer CAM usages table based on BCM pltform.
camUsageL3ExtEntry	1.3.6.1.4.1.6027.3.7.1.1.4.1		not-accessible	A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM/Table based on BCM architecture.
I32 camUsageL3ExtSlot	1.3.6.1.4.1.6027.3.7.1.1.4.1.1	Integer32	not-accessible	The slot number of linecard where the CAM is located
I32 camUsageL3ExtPipeId	1.3.6.1.4.1.6027.3.7.1.1.4.1.2	Integer32	not-accessible	The port pipe number on the linecard where the CAM is located
I32 camUsageL3ExtHostTotal	1.3.6.1.4.1.6027.3.7.1.1.4.1.3	Integer32	read-only	The total cam size allocated to layer 3 Host table. Host table is shared by IPv4,IPv6 unicast host route entries (ARP) and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entries
I32 camUsageL3ExtHostUsed	1.3.6.1.4.1.6027.3.7.1.1.4.1.4	Integer32	read-only	The total cam used in layer 3 Host table. As Host table is shared by IPv4,Ipv6 unicast host route entries and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entries.
I32 camUsageL3ExtLPMTotal	1.3.6.1.4.1.6027.3.7.1.1.4.1.5	Integer32	read-only	The total cam size allocated to layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,IPv6 unicast route entries.
I32 camUsageL3ExtLPMUsed	1.3.6.1.4.1.6027.3.7.1.1.4.1.6	Integer32	read-only	The total cam size used in layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,Ipv6 unicast route entries.The usage reflects sum of IPv4 and v6 unicast route entries.
f10SysComponentTrap	1.3.6.1.4.1.6027.3.7.1.2
sysCompAlarmMibNotifications	1.3.6.1.4.1.6027.3.7.1.2.0
NTF camUsageThresholdExceed	1.3.6.1.4.1.6027.3.7.1.2.0.1			The agent generate this trap when the cam usage for a partition is exceeded.
NTF camIsFull	1.3.6.1.4.1.6027.3.7.1.2.0.2			The agent generate this trap when the cam is fully used.
NTF camAuditError	1.3.6.1.4.1.6027.3.7.1.2.0.3			The agent generate this trap when a cam entry mismatches with the Software entry.
sysCompAlarmVariable	1.3.6.1.4.1.6027.3.7.1.2.1
INT sysCompAlarmLevel	1.3.6.1.4.1.6027.3.7.1.2.1.1	INTEGER	accessible-for-notify	the message warning level
OCT sysCompAlarmVarString	1.3.6.1.4.1.6027.3.7.1.2.1.2	OCTET STRING	accessible-for-notify	An generic string value in the TRAP object
INT sysCompSlotId	1.3.6.1.4.1.6027.3.7.1.2.1.3	INTEGER	accessible-for-notify	The associated LineCard in the TRAP object
INT sysCompPortPipe	1.3.6.1.4.1.6027.3.7.1.2.1.4	INTEGER	accessible-for-notify	The associated port pipe in the TRAP object
STR sysCompCamPartId	1.3.6.1.4.1.6027.3.7.1.2.1.5	DisplayString	accessible-for-notify	The associated CAM partion name in the TRAP object

RFC description

Dell Force10 system component MIB for monitoring CAM (Content Addressable Memory) usage on network switches.

Start monitoring Dell Force10 (Dell Networking OS/FTOS) switch/router (line-card CAM/forwarding-table usage) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FORCE10-SYSTEM-COMPONENT-MIB

What Is FORCE10-SYSTEM-COMPONENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description