F3-TIMEZONE-MIB

All MIBs › F3-TIMEZONE-MIB

Organization: ADVA Optical Networking

Last Updated: 2014-06-05

Category: Protocol: SNTP/NTP, Technology: Time Synchronization, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for time zone and NTP/SNTP configuration on FSP 150 network elements.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-TIMEZONE-MIB?

This ADVA F3 platform MIB provides time zone and Daylight Saving Time (DST) configuration for FSP150CM/CC network elements, controlling how the device's local clock is offset and adjusted relative to UTC. It exposes configuration objects for the UTC offset, DST enable flag, DST UTC offset, and the specific start/end month, day, and time defining when DST transitions occur. This is primarily a configuration MIB rather than a runtime performance/fault MIB, but correct time zone/DST settings are important supporting context for interpreting timestamps in the device's other performance and fault data, ensuring event logs and alarm timestamps align with local time. It has no dependency on external IETF time MIBs, implementing its own F3-specific timezone/DST model alongside the broader F3 platform MIBs. It is deployed on ADVA FSP150CM/CC devices wherever accurate local-time timestamping is required for correlating events, logs, and performance data across a network. Network engineers evaluating or troubleshooting this functionality can download the F3-TIMEZONE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-TIMEZONE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet device

Monitoring Examples

An admin would set f3TimeZoneUtcOffset to the local standard-time offset, then enable f3TimeZoneDstControlEnabled with f3TimeZoneDstUtcOffset and the f3TimeZoneDstStartMonth/Day/Time and f3TimeZoneDstEndMonth/Day/Time objects to have the device automatically shift its clock for daylight saving. Verifying these settings periodically ensures event and alarm timestamps generated by the device remain correctly aligned to local time for troubleshooting.

What Can Be Monitored

UTC offset configuration
DST enable state
DST UTC offset
DST start/end date and time

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3TimeZoneMIB	1.3.6.1.4.1.2544.1.12.32			This module defines the Time Zone MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3TimeZoneConfigObjects	1.3.6.1.4.1.2544.1.12.32.1
STR f3TimeZoneUtcOffset	1.3.6.1.4.1.2544.1.12.32.1.1	DisplayString	read-write	This object provides the ability to set UTC offset.
T/F f3TimeZoneDstControlEnabled	1.3.6.1.4.1.2544.1.12.32.1.2	TruthValue	read-write	This object provides the ability to toggle DST functionality.
STR f3TimeZoneDstUtcOffset	1.3.6.1.4.1.2544.1.12.32.1.3	DisplayString	read-write	This object provides the ability to set DST Offset which is the Daylight Savings Time offset from Local Time.
MON f3TimeZoneDstStartMonth	1.3.6.1.4.1.2544.1.12.32.1.4	MonthOfYear	read-write	This object provides the ability to set DST start month.
STR f3TimeZoneDstStartDay	1.3.6.1.4.1.2544.1.12.32.1.5	DisplayString	read-write	This object provides the ability to set DST start day.
STR f3TimeZoneDstStartTime	1.3.6.1.4.1.2544.1.12.32.1.6	DisplayString	read-write	This object provides the ability to set DST start time.
MON f3TimeZoneDstEndMonth	1.3.6.1.4.1.2544.1.12.32.1.7	MonthOfYear	read-write	This object provides the ability to set DST end month.
STR f3TimeZoneDstEndDay	1.3.6.1.4.1.2544.1.12.32.1.8	DisplayString	read-write	This object provides the ability to set DST end day.
STR f3TimeZoneDstEndTime	1.3.6.1.4.1.2544.1.12.32.1.9	DisplayString	read-write	This object provides the ability to set DST end time.
f3TimeZoneConformance	1.3.6.1.4.1.2544.1.12.32.2
f3TimeZoneCompliances	1.3.6.1.4.1.2544.1.12.32.2.1
f3TimeZoneCompliance	1.3.6.1.4.1.2544.1.12.32.2.1.1			Describes the requirements for conformance to the F3-TIMEZONE-MIB compliance.
f3TimeZoneGroups	1.3.6.1.4.1.2544.1.12.32.2.2
f3TimeZoneConfigGroup	1.3.6.1.4.1.2544.1.12.32.2.2.1			A collection of objects used to manage the Time Zone.

RFC description

F3 vendor platform MIB for timezone configuration and management.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (timezone/DST configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-TIMEZONE-MIB

What Is F3-TIMEZONE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description