All MIBs › F10-LINK-AGGREGATION-MIB › dot3adAggPortActorAdminState
dot3adAggPortActorAdminState
Module: F10-LINK-AGGREGATION-MIB
OID (symbolic): F10-LINK-AGGREGATION-MIB::dot3adAggPortActorAdminState
OID (numeric): 1.3.6.1.4.1.6027.3.2.1.1.7.1.4
Node type: OBJECT-TYPE
Type: F10LacpState
Access: read-only
Description: A string of 8 bits, corresponding to the current administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation.
What is dot3adAggPortActorAdminState?
An 8-bit string of administratively configured LACP Actor_State flags (LACP_Activity, LACP_Timeout, Aggregation, Synchronization, Collecting, Distributing, Defaulted, Expired) that this port transmits in LACPDUs. An admin uses this to see or influence how the local LACP state machine is configured to behave, such as active vs. passive mode and short vs. long timeout.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.2.1.1.7.1.4 snmpwalk -v2c -c public <target> F10-LINK-AGGREGATION-MIB::dot3adAggPortActorAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.2.1.1.7.1.4.1 snmpget -v2c -c public <target> F10-LINK-AGGREGATION-MIB::dot3adAggPortActorAdminState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dot3adAggPortActorAdminState.1
Start monitoring Dell Force10 switch/router (Link Aggregation/LACP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-LINK-AGGREGATION-MIB::dot3adAggPortActorAdminState OID value, configure state conditions and alerts, and monitor any Dell Force10 switch/router (Link Aggregation/LACP) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3.2 | dellNetLinkAggMib | DELL-NETWORKING-LINK-AGGREGATION-MIB |
| 1.3.6.1.4.1.6027.3.2.1 | dellNetLinkAggObjects | DELL-NETWORKING-LINK-AGGREGATION-MIB |
| 1.3.6.1.4.1.6027.3.2.1.1 | dellNetdot3dAgg | DELL-NETWORKING-LINK-AGGREGATION-MIB |
| 1.3.6.1.4.1.6027.3.2.1.1.7 | dot3adAggPortTable | DELL-NETWORKING-LINK-AGGREGATION-MIB |
| 1.3.6.1.4.1.6027.3.2.1.1.7.1 | dot3adAggPortEntry | DELL-NETWORKING-LINK-AGGREGATION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.2.1.1.7.1.4 | dot3adAggPortActorAdminState | F10-LINK-AGGREGATION-MIB |