EdgeSwitch-LOGGING-MIB

All MIBs › EdgeSwitch-LOGGING-MIB

Organization: Broadcom Inc

Last Updated: 2011-01-26

Category: Technology: Logging/Syslog, Vendor: EdgeSwitch/Ubiquiti

Description: Ubiquiti EdgeSwitch logging MIB for configuring syslog targets, log severity levels, and viewing local log buffers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EdgeSwitch-LOGGING-MIB?

EdgeSwitch-LOGGING-MIB is a Ubiquiti Networks private MIB for the EdgeSwitch platform, covering configuration of the switch's system logging (syslog) subsystem, including remote syslog server targets, per-facility severity levels, and access to locally buffered log messages. It exposes configuration objects for syslog destination servers and severity thresholds, plus status/data objects for the switch's local log buffer contents. Its monitoring value is software/system-event oriented: an administrator can review buffered log entries and confirm syslog forwarding is correctly configured to detect and be alerted to system events, warnings, and errors as they occur. It is a Ubiquiti-derived private MIB rather than a formal IETF logging standard, used alongside other EdgeSwitch private MIBs. It is typically deployed wherever an EdgeSwitch needs centralized log collection, such as enterprise or campus network operations centers. Engineers can download the EdgeSwitch-LOGGING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EdgeSwitch-LOGGING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti EdgeSwitch managed Ethernet switches

Monitoring Examples

No specific object/table names were provided in the source extract, so specific tables cannot be cited without invention. In general use, an administrator would configure a remote syslog server target and minimum severity level, then periodically read the local log buffer objects to check for newly logged error or warning events indicating a switch-level fault.

What Can Be Monitored

local log buffer contents
syslog server target configuration
log severity/facility level

Imported Objects

From EdgeSwitch-INVENTORY-MIB

agentInventoryComponentIndex

OBJECT-TYPE

From EdgeSwitch-REF-MIB

fastPath

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using agentLogMessagesReceived OID:

Select an Ubiquiti EdgeSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentLogMessagesReceived into the Find box to locate it in the OID tree, then select it and click OK. The number of messages received by the log process. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathLogging	1.3.6.1.4.1.4413.1.1.14			This MIB provides objects to configure and display events logged on this system.
agentLogConfigGroup	1.3.6.1.4.1.4413.1.1.14.1
agentLogInMemoryConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.1
INT agentLogInMemoryAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.1.1	INTEGER	read-write	Administratively enable/disable the In Memory log.
INT agentLogInMemoryBehavior	1.3.6.1.4.1.4413.1.1.14.1.1.4	INTEGER	read-write	Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging.
agentLogConsoleConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.2
INT agentLogConsoleAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.2.1	INTEGER	read-write	Admin mode for console logs
AGE agentLogConsoleSeverityFilter	1.3.6.1.4.1.4413.1.1.14.1.2.2	AgentLogSeverity	read-write	Severity filter for console logs
agentLogSysLogConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.4
INT agentLogSyslogAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.4.1	INTEGER	read-write	For Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts.
U32 agentLogSyslogLocalPort	1.3.6.1.4.1.4413.1.1.14.1.4.3	Unsigned32	read-write	This is the port on the local host from which syslog messages are sent.
U32 agentLogSyslogMaxHosts	1.3.6.1.4.1.4413.1.1.14.1.4.4	Unsigned32	read-only	Maximum number of hosts that can be configured for logging syslog messages.
agentLogSyslogHostTable	1.3.6.1.4.1.4413.1.1.14.1.4.5		not-accessible	Syslog host table containing syslog host entries.
agentLogSyslogHostEntry	1.3.6.1.4.1.4413.1.1.14.1.4.5.1		not-accessible	Syslog Host entry attributes.
U32 agentLogHostTableIndex	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.1	Unsigned32	not-accessible	Index to syslog host entry in syslog host table.
IPt agentLogHostTableIpAddressType	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.2	InetAddressType	read-create	Syslog Host table IP Address Type.
IP agentLogHostTableIpAddress	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.3	InetAddress	read-create	Syslog Host table IP Address. Set operation of this object can be successful only when the valid IpAddressType (Ipv4, Ipv6 or DNS) is configured and the address specified is valid for that Address type.
U32 agentLogHostTablePort	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.4	Unsigned32	read-create	Syslog Host table port number.
AGE agentLogHostTableSeverityFilter	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.5	AgentLogSeverity	read-create	Configures the minimum severity that will be stored in the In Memory log.
ROW agentLogHostTableRowStatus	1.3.6.1.4.1.4413.1.1.14.1.4.5.1.7	RowStatus	read-create	Syslog Host table row status
NUM agentLogSyslogSourceInterface	1.3.6.1.4.1.4413.1.1.14.1.4.6	InterfaceIndexOrZero	read-write	A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection.
agentLogCliCommandsConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.5
INT agentLogCliCommandsAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.5.1	INTEGER	read-write	Administratively enable/disable the logging of the CLI Commands
agentLogEmailAlertConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.6
INT agentLogEmailAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.6.1	INTEGER	read-write	For Enabling and Disabling email alerts to SMTP server. Setting this to disable stops emailing to SMTP servers.
STR agentLogEmailfromAddr	1.3.6.1.4.1.4413.1.1.14.1.6.2	DisplayString	read-write	Email from Address
U32 agentLogEmaillogDuration	1.3.6.1.4.1.4413.1.1.14.1.6.3	Unsigned32	read-write	This duration in minutes determines how frequently the non critical messages are sent to the SMTP server.
AGE agentLogEmailUrgentSeverity	1.3.6.1.4.1.4413.1.1.14.1.6.4	AgentLogSeverity	read-write	This is the severity level for the critical log messages
AGE agentLogEmailNonUrgentSeverity	1.3.6.1.4.1.4413.1.1.14.1.6.5	AgentLogSeverity	read-write	This is the severity level for the non critical log messages.
AGE agentLogEmailTrapsSeverity	1.3.6.1.4.1.4413.1.1.14.1.6.6	AgentLogSeverity	read-write	This is the severity level for Trap messages.
agentLogEmailToAddrTable	1.3.6.1.4.1.4413.1.1.14.1.6.7		not-accessible	The (conceptual) table listing the destination email address and the message type.
agentLogEmailToAddrEntry	1.3.6.1.4.1.4413.1.1.14.1.6.7.1		not-accessible	An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses.
INT agentLogEmailToAddrMessageType	1.3.6.1.4.1.4413.1.1.14.1.6.7.1.1	INTEGER	not-accessible	Log message Type
STR agentLogEmailToAddr	1.3.6.1.4.1.4413.1.1.14.1.6.7.1.2	DisplayString	not-accessible	Email Sender Address
ROW agentLogEmailToAddrEntryStatus	1.3.6.1.4.1.4413.1.1.14.1.6.7.1.3	RowStatus	read-create	This is to create or delete the entry
agentLogEmailSubjectTable	1.3.6.1.4.1.4413.1.1.14.1.6.8		not-accessible	The (conceptual) table listing the subject of the email and the message type.
agentLogEmailSubjectEntry	1.3.6.1.4.1.4413.1.1.14.1.6.8.1		not-accessible	An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type.
INT agentLogEmailSubjectMessageType	1.3.6.1.4.1.4413.1.1.14.1.6.8.1.1	INTEGER	not-accessible	Log message Type
STR agentLogEmailSubject	1.3.6.1.4.1.4413.1.1.14.1.6.8.1.2	DisplayString	read-create	Email Subject. When this object is set to empty-string, it resets to factory default string.
ROW agentLogEmailSubjectEntryStatus	1.3.6.1.4.1.4413.1.1.14.1.6.8.1.3	RowStatus	read-create	This is to create or delete the entry
agentLogEmailMailServerTable	1.3.6.1.4.1.4413.1.1.14.1.6.9		not-accessible	The (conceptual) table listing the mail servers
agentLogEmailMailServerEntry	1.3.6.1.4.1.4413.1.1.14.1.6.9.1		not-accessible	An entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server.
IPt agentLogEmailSmtpAddrType	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.1	InetAddressType	not-accessible	Email SMTP Address type
IP agentLogEmailSmtpAddr	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.2	InetAddress	not-accessible	SMTP server Address
INE agentLogEmailSmtpPort	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.3	InetPortNumber	read-write	SMTP Port number. When this object is set to 0, it resets to factory default port number.
INT agentLogEmailSecurity	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.4	INTEGER	read-write	This is the authentication mechanism that should be used.
STR agentLogEmailloginID	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.5	DisplayString	read-write	This user id is used while the switch/router is being authenticated by the SMTP server.The user ID should be minimum of 1 charcter to maximum of 16 characters.
STR agentLogEmailPassword	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.6	DisplayString	read-write	This password is used while the switch/router is being authenticated by the SMTP server.The password should be minimum of 1 character to maximum of 16 characters.
ROW agentLogEmailEntryStatus	1.3.6.1.4.1.4413.1.1.14.1.6.9.1.7	RowStatus	read-create	This is to create or delete the entry
agentLogWebConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.7
INT agentLogWebAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.7.1	INTEGER	read-write	Administratively enable/disable the logging of the Web
agentLogSnmpConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.8
INT agentLogSnmpAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.8.1	INTEGER	read-write	Administratively enable/disable the logging of the Snmp
agentLogAuditConfigGroup	1.3.6.1.4.1.4413.1.1.14.1.9
INT agentLogAuditAdminStatus	1.3.6.1.4.1.4413.1.1.14.1.9.1	INTEGER	read-write	Administratively enable/disable Switch Auditing
agentLogStatisticsGroup	1.3.6.1.4.1.4413.1.1.14.2
C32 agentLogMessagesReceivedEx	1.3.6.1.4.1.4413.1.1.14.2.1	Counter32	read-only	The number of messages received by the log process. This includes messages that are dropped or ignored.
C32 agentLogMessagesDropped	1.3.6.1.4.1.4413.1.1.14.2.2	Counter32	read-only	The number of messages that could not be processed due to error or lack of resources.
C32 agentLogSyslogMessagesRelayed	1.3.6.1.4.1.4413.1.1.14.2.3	Counter32	read-only	The number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host.
C32 agentLogSyslogMessagesIgnored	1.3.6.1.4.1.4413.1.1.14.2.4	Counter32	read-only	The number of messages that were not processed by the syslog process because the component name or the priority level did not match any specification.
DAT agentLogMessageReceivedTime	1.3.6.1.4.1.4413.1.1.14.2.5	DateAndTime	read-only	The local time when a message was last received by the log subsystem specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.
DAT agentLogSyslogMessageDeliveredTime	1.3.6.1.4.1.4413.1.1.14.2.6	DateAndTime	read-only	The local time when a message was last delivered to a syslog host specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.
agentLogEmailAlertStatsGroup	1.3.6.1.4.1.4413.1.1.14.2.7
C32 agentLogEmailStatsemailsSentCount	1.3.6.1.4.1.4413.1.1.14.2.7.1	Counter32	read-only	This is the count to show the no of emails sent so far.
C32 agentLogEmailStatsemailsFailureCount	1.3.6.1.4.1.4413.1.1.14.2.7.2	Counter32	read-only	This is the count to show the no of emails failures happened so far...
U32 agentLogEmailStatsTimeSinceLastEmailSent	1.3.6.1.4.1.4413.1.1.14.2.7.3	Unsigned32	read-only	This is the number of seconds since the last email was sent.
INT agentLogEmailStatsClear	1.3.6.1.4.1.4413.1.1.14.2.7.4	INTEGER	read-write	This is to clear the email alert stats.
agentLogInMemoryGroup	1.3.6.1.4.1.4413.1.1.14.3
G32 agentLogInMemoryLogCount	1.3.6.1.4.1.4413.1.1.14.3.1	Gauge32	read-only	The count of valid entries in the in-memory log.
agentLogInMemoryTable	1.3.6.1.4.1.4413.1.1.14.3.2		not-accessible	The in-memory log table containing sequence of in-memory log entries.
agentLogInMemoryEntry	1.3.6.1.4.1.4413.1.1.14.3.2.1		not-accessible	An individual message entry in in-memory log table.
U32 agentLogInMemoryMsgIndex	1.3.6.1.4.1.4413.1.1.14.3.2.1.1	Unsigned32	not-accessible	The index to message entry in the in-memory log table.
STR agentLogInMemoryMsgText	1.3.6.1.4.1.4413.1.1.14.3.2.1.2	DisplayString	read-only	Message text info for inmemory logged messages.
agentLogTrapsGroup	1.3.6.1.4.1.4413.1.1.14.5
agentLogEmailAlertTrapsGroup	1.3.6.1.4.1.4413.1.1.14.5.1
NTF agentLogEmailSendFailed	1.3.6.1.4.1.4413.1.1.14.5.1.1			When ever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far.

RFC description

System logging and syslog configuration management for Broadcom EdgeSwitch Ethernet switches.

Start monitoring Ubiquiti EdgeSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EdgeSwitch-LOGGING-MIB