EdgeSwitch-INVENTORY-MIB

All MIBs › EdgeSwitch-INVENTORY-MIB

Organization: Broadcom Inc

Last Updated: 2013-10-15

Category: Hardware and Environment, Vendor: EdgeSwitch/Ubiquiti

Description: Ubiquiti's EdgeSwitch inventory MIB, tracking hardware components, firmware versions, and physical device details.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EdgeSwitch-INVENTORY-MIB?

EdgeSwitch-INVENTORY-MIB is a Ubiquiti Networks MIB for its EdgeSwitch line, built on the Broadcom FASTPATH switch software's inventory framework, covering physical inventory of the device — units, slots, and cards in modular/stackable chassis. Per its module description it reports configuration and status information about these physical components, which would include hardware presence, type, and operational state for each unit/slot/card. Its monitoring role is squarely hardware-status-oriented: it lets an operator confirm which physical units are present in a stack and which cards occupy which slots, and detect when a slot is empty, a card fails, or a stack member drops out, complementing environmental/system MIBs for a full hardware-health picture. It follows the same FASTPATH-derived conformance pattern used across other Broadcom FASTPATH-based switch inventory MIBs from multiple vendors. It is deployed on Ubiquiti EdgeSwitch stackable/modular switches in SMB and prosumer network environments. Engineers can download the EdgeSwitch-INVENTORY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EdgeSwitch-INVENTORY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti EdgeSwitch stackable/modular switches

Monitoring Examples

Only the conformance section of this module (fastPathInventoryConformance, fastPathInventoryCompliances, fastPathInventoryGroups) was present in the provided sample objects, so no runtime data-table object names can be cited directly; the module description indicates the corresponding data tables (unit/slot/card status objects, not included in the sample) would let an operator poll for a missing card in a slot or a stack unit that has gone offline. Because only conformance objects were supplied here, this example is necessarily generic rather than grounded in specific table/column names.

What Can Be Monitored

unit/slot/card presence and status (per module description; specific object names not in provided sample)

Imported Objects

From EdgeSwitch-REF-MIB

fastPath

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using agentInventoryStackPortDataRate OID:

Select an Ubiquiti EdgeSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentInventoryStackPortDataRate into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the approximate data rate on the stacking port. Measured in Gb/s. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR agentInventoryCardDescription	1.3.6.1.4.1.4413.1.1.13.4.1.1.4	DisplayString	read-only	The card description for the supported Card Type.
agentInventoryCardGroup	1.3.6.1.4.1.4413.1.1.13.4
U32 agentInventoryCardIndex	1.3.6.1.4.1.4413.1.1.13.4.1.1.1	Unsigned32	not-accessible	An arbitrary index used to identify cards in the table.
NTF agentInventoryCardMismatch	1.3.6.1.4.1.4413.1.1.13.0.1			Sent when a card is inserted which is a different type than what the slot was configured for.
STR agentInventoryCardModelIdentifier	1.3.6.1.4.1.4413.1.1.13.4.1.1.3	DisplayString	read-only	The model identifier for the supported Card Type.
AGE agentInventoryCardType	1.3.6.1.4.1.4413.1.1.13.4.1.1.2	AgentInventoryCardType	read-only	The Card Type associated with this instance.
agentInventoryCardTypeEntry	1.3.6.1.4.1.4413.1.1.13.4.1.1		not-accessible	Contains information related to a specific Card Type.
agentInventoryCardTypeTable	1.3.6.1.4.1.4413.1.1.13.4.1		not-accessible	Contains information for all supported Card Types in the system.
NTF agentInventoryCardUnsupported	1.3.6.1.4.1.4413.1.1.13.0.2			Sent when a card is inserted which is of a type that is not supported by the slot.
agentInventoryComponentEntry	1.3.6.1.4.1.4413.1.1.13.5.1.1		not-accessible	Contains information related to a specific Components.
agentInventoryComponentGroup	1.3.6.1.4.1.4413.1.1.13.5
U32 agentInventoryComponentIndex	1.3.6.1.4.1.4413.1.1.13.5.1.1.1	Unsigned32	not-accessible	An arbitrary index used to reference components in the table.
STR agentInventoryComponentMnemonic	1.3.6.1.4.1.4413.1.1.13.5.1.1.2	DisplayString	read-only	The abreviated name of this component.
STR agentInventoryComponentName	1.3.6.1.4.1.4413.1.1.13.5.1.1.3	DisplayString	read-only	The name of the component for this instance.
agentInventoryComponentTable	1.3.6.1.4.1.4413.1.1.13.5.1		not-accessible	Contains information for all supported Components in the system.
INT agentInventorySFS	1.3.6.1.4.1.4413.1.1.13.8.2	INTEGER	read-write	Controls whether the Stack Firmware Synchronization is enabled or disabled.
INT agentInventorySFSAllowDowngrade	1.3.6.1.4.1.4413.1.1.13.8.3	INTEGER	read-write	Controls whether downgrading the image on the stack member is allowed or not if the firmware version of manager is older to firmware version of stack member
NTF agentInventorySFSComplete	1.3.6.1.4.1.4413.1.1.13.0.6			Sent when Stack Firmware Synchronization operation is complete on a Stack Member.
NTF agentInventorySFSFail	1.3.6.1.4.1.4413.1.1.13.0.7			Sent when Stack Firmware Synchronization operation failed for a Stack Member.
agentInventorySFSGroup	1.3.6.1.4.1.4413.1.1.13.8
NTF agentInventorySFSStart	1.3.6.1.4.1.4413.1.1.13.0.5			Sent when Stack Firmware Synchronization operation is started on a Stack Member.
INT agentInventorySFSTrap	1.3.6.1.4.1.4413.1.1.13.8.4	INTEGER	read-write	Controls sending of traps during Stack firmware synchronization operation
INT agentInventorySlotAdminMode	1.3.6.1.4.1.4413.1.1.13.3.1.1.5	INTEGER	read-write	Indicates whether this card is administratively enabled or disabled.
BIT agentInventorySlotCapabilities	1.3.6.1.4.1.4413.1.1.13.3.1.1.8	Bits	read-only	Indicates the different capabilities this slot has. pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled through the object agentInventorySlotPowerMode
AGE agentInventorySlotConfiguredCardType	1.3.6.1.4.1.4413.1.1.13.3.1.1.7	AgentInventoryCardType	read-write	Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards.
agentInventorySlotEntry	1.3.6.1.4.1.4413.1.1.13.3.1.1		not-accessible	TODO
agentInventorySlotGroup	1.3.6.1.4.1.4413.1.1.13.3
AGE agentInventorySlotInsertedCardType	1.3.6.1.4.1.4413.1.1.13.3.1.1.6	AgentInventoryCardType	read-only	Indicates the inserted card type. Will return 0 if the slot is not full.
U32 agentInventorySlotNumber	1.3.6.1.4.1.4413.1.1.13.3.1.1.1	Unsigned32	not-accessible	An incrimental index of the slot in this unit.
INT agentInventorySlotPowerMode	1.3.6.1.4.1.4413.1.1.13.3.1.1.4	INTEGER	read-write	Indicates whether a card in this slot will be powered on.
INT agentInventorySlotStatus	1.3.6.1.4.1.4413.1.1.13.3.1.1.3	INTEGER	read-only	Indicates the current status of the slot.
agentInventorySlotTable	1.3.6.1.4.1.4413.1.1.13.3.1		not-accessible	TODO
INT agentInventoryStackActivateSTK	1.3.6.1.4.1.4413.1.1.13.1.6	INTEGER	read-write	Activates the specified STK file on all units on the stack.
INT agentInventoryStackDeleteSTK	1.3.6.1.4.1.4413.1.1.13.1.7	INTEGER	read-write	Deletes the specified STK file from all units on the stack.
agentInventoryStackGroup	1.3.6.1.4.1.4413.1.1.13.1
U32 agentInventoryStackMaxUnitNumber	1.3.6.1.4.1.4413.1.1.13.1.3	Unsigned32	read-only	Indicates the maximum allowed Unit Number configurable on the stack.
INT agentInventoryStackPortConfiguredStackMode	1.3.6.1.4.1.4413.1.1.13.7.2.1.4	INTEGER	read-write	Configured mode of the Stack Port. Changes to this value happen only after a reset of the switch.
C32 agentInventoryStackPortDataRateEx	1.3.6.1.4.1.4413.1.1.13.7.2.1.8	Counter32	read-only	Approximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0.
agentInventoryStackPortEntry	1.3.6.1.4.1.4413.1.1.13.7.2.1		not-accessible	Contains information related to a specific Stack Port.
C32 agentInventoryStackPortErrorRate	1.3.6.1.4.1.4413.1.1.13.7.2.1.9	Counter32	read-only	Approximate error rate on the stack port. Measured in Errors per Second. Ports which are in ethernet mode will return 0.
agentInventoryStackPortGroup	1.3.6.1.4.1.4413.1.1.13.7
U32 agentInventoryStackPortIndex	1.3.6.1.4.1.4413.1.1.13.7.2.1.1	Unsigned32	not-accessible	An arbitrary index used to reference Stack Ports in the table.
INT agentInventoryStackPortIpTelephonyQOSSupport	1.3.6.1.4.1.4413.1.1.13.7.1	INTEGER	read-write	Controls whether the Stack Ports give higher priority to IP Telephony traffic.
NTF agentInventoryStackPortLinkDown	1.3.6.1.4.1.4413.1.1.13.0.4			Sent when a Stack Port is disconnected from annother Stack Member.
G32 agentInventoryStackPortLinkSpeed	1.3.6.1.4.1.4413.1.1.13.7.2.1.7	Gauge32	read-only	Speed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0.
INT agentInventoryStackPortLinkStatus	1.3.6.1.4.1.4413.1.1.13.7.2.1.6	INTEGER	read-only	Link status of the Stack Port. Ports which are in ethernet mode will return a status of down(2).
NTF agentInventoryStackPortLinkUp	1.3.6.1.4.1.4413.1.1.13.0.3			Sent when a Stack Port is connected to annother Stack Member.
INT agentInventoryStackPortRunningStackMode	1.3.6.1.4.1.4413.1.1.13.7.2.1.5	INTEGER	read-only	Currently operational mode of the Stack Port.
agentInventoryStackPortTable	1.3.6.1.4.1.4413.1.1.13.7.2		not-accessible	Contains information for all Stack Ports present in the system.
STR agentInventoryStackPortTag	1.3.6.1.4.1.4413.1.1.13.7.2.1.3	DisplayString	read-only	The name of the Stack Port for this instance.
C32 agentInventoryStackPortTotalErrors	1.3.6.1.4.1.4413.1.1.13.7.2.1.10	Counter32	read-only	Number of errors since boot. The counter may wrap. Ports which are in ethernet mode will return 0.
U32 agentInventoryStackPortUnit	1.3.6.1.4.1.4413.1.1.13.7.2.1.2	Unsigned32	read-only	The Unit Index this Stack Port is physically located on.
INT agentInventoryStackReload	1.3.6.1.4.1.4413.1.1.13.1.2	INTEGER	read-write	Initiates stack reload.
INT agentInventoryStackReplicateSTK	1.3.6.1.4.1.4413.1.1.13.1.1	INTEGER	read-write	Initiates STK copy from management unit to all other management capable units in the stack.
INT agentInventoryStackReplicateSTKStatus	1.3.6.1.4.1.4413.1.1.13.1.4	INTEGER	read-only	Indicates the current status of an STK copy from management unit to all other management capable units inthe stack.
INT agentInventoryStackSTKname	1.3.6.1.4.1.4413.1.1.13.1.5	INTEGER	read-write	STK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set.
U32 agentInventoryStackTemplateId	1.3.6.1.4.1.4413.1.1.13.1.8	Unsigned32	read-write	Sets the stack template ID on all units in the stack. Deletes the startup configuration on all affected units and resets all units in the stack. This is write-only value. It always returns '0' on request.
U32 agentInventoryStackUnitNumber	1.3.6.1.4.1.4413.1.1.13.8.1	Unsigned32	not-accessible	The unit number associated with stack unit .
STR agentInventorySupportedUnitDescription	1.3.6.1.4.1.4413.1.1.13.2.1.1.5	DisplayString	read-only	The description of the supported unit.
agentInventorySupportedUnitEntry	1.3.6.1.4.1.4413.1.1.13.2.1.1		not-accessible	TODO
STR agentInventorySupportedUnitExpectedCodeVer	1.3.6.1.4.1.4413.1.1.13.2.1.1.6	DisplayString	read-only	The expected code version.
U32 agentInventorySupportedUnitIndex	1.3.6.1.4.1.4413.1.1.13.2.1.1.1	Unsigned32	not-accessible	The unit identifier associated with the supported unit.
STR agentInventorySupportedUnitModelIdentifier	1.3.6.1.4.1.4413.1.1.13.2.1.1.4	DisplayString	read-only	The model identifier for the supported unit.
agentInventorySupportedUnitTable	1.3.6.1.4.1.4413.1.1.13.2.1		not-accessible	TODO
agentInventoryTraps	1.3.6.1.4.1.4413.1.1.13.0
INT agentInventoryUnitActivateSTK	1.3.6.1.4.1.4413.1.1.13.2.2.1.23	INTEGER	read-write	Activates the specified STK file on this unit.
AGE agentInventoryUnitAdminMgmtPref	1.3.6.1.4.1.4413.1.1.13.2.2.1.9	AgentInventoryUnitPreference	read-create	Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0.
U32 agentInventoryUnitAdminMgmtPrefValue	1.3.6.1.4.1.4413.1.1.13.2.2.1.10	Unsigned32	read-create	Indicates the configured preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of agentInventoryUnitHWMgmtPref if assigned.
U32 agentInventoryUnitAssignNumber	1.3.6.1.4.1.4413.1.1.13.2.2.1.2	Unsigned32	read-create	Allows setting the unit number associated with this unit. This number must be less than the value returned by agentInventoryStackMaxUnitNumber. Setting this object to a non-zero value will initate unit renumbering. The switch will be reset to perform unit renumbering and the configuration of switch interfaces will be cleared. If the unit being renumbered is the manager of the stack, then all the switches in the stack will be reset to perform Manager unit renumbering and the configuration of Manager switch interfaces will be cleared.
INT agentInventoryUnitDeleteSTK	1.3.6.1.4.1.4413.1.1.13.2.2.1.24	INTEGER	read-write	Deletes the specified STK file on this unit.
STR agentInventoryUnitDescription	1.3.6.1.4.1.4413.1.1.13.2.2.1.15	DisplayString	read-only	The description of the unit.
STR agentInventoryUnitDetectedCodeInFlashVer	1.3.6.1.4.1.4413.1.1.13.2.2.1.13	DisplayString	read-only	The version of code that is currently stored in FLASH memory on the unit. This code will execute after the unit is reset. If the unit is not detected then this object will return an empty string.
STR agentInventoryUnitDetectedCodeVer	1.3.6.1.4.1.4413.1.1.13.2.2.1.12	DisplayString	read-only	The version of code running on this unit. If the unit is not detected then the code version is an empty string.
agentInventoryUnitEntry	1.3.6.1.4.1.4413.1.1.13.2.2.1		not-accessible	Each Instance corresponds with a different unit managed by this agent.
agentInventoryUnitGroup	1.3.6.1.4.1.4413.1.1.13.2
AGE agentInventoryUnitHWMgmtPref	1.3.6.1.4.1.4413.1.1.13.2.2.1.7	AgentInventoryUnitPreference	read-only	Indicates the default preference assigned to the unit.
U32 agentInventoryUnitHWMgmtPrefValue	1.3.6.1.4.1.4413.1.1.13.2.2.1.8	Unsigned32	read-only	Indicates the default preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
STR agentInventoryUnitImage1Version	1.3.6.1.4.1.4413.1.1.13.2.2.1.20	DisplayString	read-only	Code version for Image1.
STR agentInventoryUnitImage2Version	1.3.6.1.4.1.4413.1.1.13.2.2.1.21	DisplayString	read-only	Code version for Image2.
INT agentInventoryUnitMgmtAdmin	1.3.6.1.4.1.4413.1.1.13.2.2.1.6	INTEGER	read-create	Indicates whether the unit is a Management Unit, a Stack Unit, or has been configured to be a Management Unit. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified stack unit. Object values stackUnit(2) and mgmtUnassigned(3) cannot be set.
U32 agentInventoryUnitNumber	1.3.6.1.4.1.4413.1.1.13.2.2.1.1	Unsigned32	not-accessible	The unit number associated with this unit.
INT agentInventoryUnitReload	1.3.6.1.4.1.4413.1.1.13.2.2.1.17	INTEGER	read-write	Reload a specific unit in the stack.
INT agentInventoryUnitReplicateSTK	1.3.6.1.4.1.4413.1.1.13.2.2.1.16	INTEGER	read-write	Initiates the specified STK file copy from management unit to this unit.
INT agentInventoryUnitReplicateSTKStatus	1.3.6.1.4.1.4413.1.1.13.2.2.1.25	INTEGER	read-only	Indicates the current status of an STK copy from the management unit to another management capable unit in the stack.
ROW agentInventoryUnitRowStatus	1.3.6.1.4.1.4413.1.1.13.2.2.1.18	RowStatus	read-create	The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type of of unit to pre-configure. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
STR agentInventoryUnitSerialNumber	1.3.6.1.4.1.4413.1.1.13.2.2.1.19	DisplayString	read-only	The Serial Number of the unit.
INT agentInventoryUnitSFSLastAttemptStatus	1.3.6.1.4.1.4413.1.1.13.2.2.1.28	INTEGER	read-only	Status parameter to indicate whether the last synchronization attempt succeeded or failed.If SFS is initated for a particular unit and if it completes successfully this object will return success(2),if SFS operation failed lasttime for this unit,this object will return failure(3).if SFS did not initiate for this unit,this object will retunrn none(1). If activation of the image failed because the underlying bootcode version is older than the minimum boot code version specified in the image, this object returns min-bootcode-version-not-met(4)
INT agentInventoryUnitSFSTransferStatus	1.3.6.1.4.1.4413.1.1.13.2.2.1.27	INTEGER	read-only	Status parameter to indicate stack firmware synchronization operation status for a particular unit. If SFS transfer is in progress for a particular unit status will be inProgress(2),otherwise status will be noAction(1).
INT agentInventoryUnitStandby	1.3.6.1.4.1.4413.1.1.13.2.2.1.26	INTEGER	read-write	Configures the standby status of this unit. The Management unit may not be configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear standby configuration. A unit that is standby_opr(2) may NOT be set to unassigned(1).
INT agentInventoryUnitStatus	1.3.6.1.4.1.4413.1.1.13.2.2.1.11	INTEGER	read-only	The unit status of this unit.
INT agentInventoryUnitSTKname	1.3.6.1.4.1.4413.1.1.13.2.2.1.22	INTEGER	read-write	STK file to be used for copy/delete/activate operatiosn.
U32 agentInventoryUnitSupportedUnitIndex	1.3.6.1.4.1.4413.1.1.13.2.2.1.4	Unsigned32	read-create	The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with.
agentInventoryUnitTable	1.3.6.1.4.1.4413.1.1.13.2.2		not-accessible	A table of Per-Unit configuration objects.
AGE agentInventoryUnitType	1.3.6.1.4.1.4413.1.1.13.2.2.1.3	AgentInventoryUnitType	read-only	The Unit Type identifier for this unit.
TIK agentInventoryUnitUpTime	1.3.6.1.4.1.4413.1.1.13.2.2.1.14	TimeTicks	read-only	The system up time of the unit.
fastPathInventory	1.3.6.1.4.1.4413.1.1.13			This MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
fastPathInventoryCardGroup	1.3.6.1.4.1.4413.1.1.13.6.2.4			The collection of objects which are used to represent the card types this system can manage.
fastPathInventoryCompliance	1.3.6.1.4.1.4413.1.1.13.6.1.1			The compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB.
fastPathInventoryCompliance2	1.3.6.1.4.1.4413.1.1.13.6.1.2			The compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB.
fastPathInventoryCompliances	1.3.6.1.4.1.4413.1.1.13.6.1
fastPathInventoryConformance	1.3.6.1.4.1.4413.1.1.13.6
fastPathInventoryGroups	1.3.6.1.4.1.4413.1.1.13.6.2
fastPathInventoryNotificationsGroup	1.3.6.1.4.1.4413.1.1.13.6.2.5			The collection of notifications used to indicate problems associated with the insertion of cards.
fastPathInventorySlotGroup	1.3.6.1.4.1.4413.1.1.13.6.2.3			The collection of objects which are used to represent slots in the each unit managed by this agent.
fastPathInventorySupportedUnitGroup	1.3.6.1.4.1.4413.1.1.13.6.2.1			The collection of objects which are used to represent multiple units in the stack.
fastPathInventoryUnitGroup	1.3.6.1.4.1.4413.1.1.13.6.2.2			The collection of objects which are used to represent multiple units in the stack.

RFC description

Ubiquiti EdgeSwitch inventory MIB for monitoring hardware components, firmware versions, and physical device information.

Start monitoring Ubiquiti EdgeSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EdgeSwitch-INVENTORY-MIB