ERICSSON-ROUTER-IPPOOL-MIB :: eriRouterIpPoolContextThresholdPercentage

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-IPPOOL-MIB › eriRouterIpPoolContextThresholdPercentage

eriRouterIpPoolContextThresholdPercentage

Module: ERICSSON-ROUTER-IPPOOL-MIB

OID (symbolic): ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThresholdPercentage

OID (numeric): 1.3.6.1.4.1.193.218.2.15.1.2.7.1.2

Node type: OBJECT-TYPE

Type: EriRouterPercentage

Access: read-only

Description: A threshold for the percentage of the number of currently available IP Pool addresses against the total number of IP Pool addresses configured within the context.

This is a falling threshold, so an SNMP trap and/or log message will only be sent when the current value, which is the % of eriRouterIpPoolContextAvailable/eriRouterIpPoolContextTotalSize truncated to a whole number in percentage, is less than or equal to this threshold, and the percentage value at the last check was greater than this threshold.

Additionally, the action of sending the SNMP trap and/or logging a message is subject to the values of eriRouterIpPoolContextThresholdSendTrap and eriRouterIpPoolContextThresholdLogMessage.

What is eriRouterIpPoolContextThresholdPercentage?

A percentage-based falling threshold on the ratio of available to total context addresses; a trap/log fires when the truncated percentage drops to or below this value after previously being above it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.15.1.2.7.1.2
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThresholdPercentage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.15.1.2.7.1.2.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThresholdPercentage.1

Start monitoring Ericsson SmartEdge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThresholdPercentage OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge routers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.15eriRouterIpPoolMibERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1eriRouterIpPoolMIBObjectsERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2eriRouterIpPoolSummaryERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2.7eriRouterIpPoolContextThresholdPercentTableERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2.7.1eriRouterIpPoolContextThresholdPercentEntryERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2.7.1.2eriRouterIpPoolContextThresholdPercentageERICSSON-ROUTER-IPPOOL-MIB