ERICSSON-ROUTER-IPPOOL-MIB :: eriRouterIpPoolContextThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-IPPOOL-MIB › eriRouterIpPoolContextThreshold

eriRouterIpPoolContextThreshold

Module: ERICSSON-ROUTER-IPPOOL-MIB

OID (symbolic): ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThreshold

OID (numeric): 1.3.6.1.4.1.193.218.2.15.1.2.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The per-context threshold of an IP Pool is the value for currently available per-context addresses, as reported in eriRouterIpPoolContextAvailable, which causes a trap and/or log message to be generated when this value is reached.

This is a falling threshold, so a trap and/or log message will only be sent on a transition of the value of available addresss from (eriRouterIpPoolContextThreshold+1) addresses to eriRouterIpPoolContextThreshold addresses.

Additionally, the action of sending the trap and/or log message is subject to the values of eriRouterIpPoolContextSendTrap and eriRouterIpPoolContextLogMessage.

A value of zero means there is no per-context threshold.

What is eriRouterIpPoolContextThreshold?

Falling-threshold value for the context-wide available-address count; when eriRouterIpPoolContextAvailable drops to this level a trap and/or log message fires, with 0 meaning no threshold is set.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.15.1.2.3
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.15.1.2.3.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThreshold.1

Start monitoring Ericsson SmartEdge routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-IPPOOL-MIB::eriRouterIpPoolContextThreshold OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge routers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.15eriRouterIpPoolMibERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1eriRouterIpPoolMIBObjectsERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2eriRouterIpPoolSummaryERICSSON-ROUTER-IPPOOL-MIB
1.3.6.1.4.1.193.218.2.15.1.2.3eriRouterIpPoolContextThresholdERICSSON-ROUTER-IPPOOL-MIB