EQUIPE-ATM-MIB

All MIBs › EQUIPE-ATM-MIB

Last Updated: 2000-09-17

Category: ATM, Domain: WAN/TDM, Vendor: Equipe

Description: Equipe Communications ATM MIB providing management objects for ATM PVC configuration and cell-level statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EQUIPE-ATM-MIB?

EQUIPE-ATM-MIB is a proprietary MIB module from Equipe Communications for managing ATM functionality on Equipe network devices, covering PVC (permanent virtual circuit) configuration and cell-level statistics per the module's short description. The full object list was not available for this extraction, so specific table and object names cannot be confirmed, but a module of this kind would typically expose PVC provisioning state, VPI/VCI identifiers, and cell/packet counters per circuit. Its expected monitoring value would be both configuration status (whether PVCs are provisioned and up) and traffic/fault statistics (cell counts, discards, errors) at the ATM layer. ATM MIBs of this type often build on IETF ATM-related standards such as the ATM-MIB (RFC 2515), though this cannot be confirmed from the available data. It would be deployed on Equipe Communications ATM switching/transport equipment, historically used in carrier and enterprise ATM networks, where administrators can download the EQUIPE-ATM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EQUIPE-ATM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Equipe Communications ATM switching/transport equipment

Monitoring Examples

No object or table names were provided in the extraction for this module, so a concrete monitoring example cannot be honestly constructed from real object names; specific polling guidance would require consulting the actual MIB source for its PVC and cell-statistics table definitions.

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-SMI

Counter32
Counter64
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using eqAtmStatsInCells OID:

Select an Equipe Communications (later Ciena) ATM/optical transport equipment (ATM PVC configuration/cell statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eqAtmStatsInCells into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of cells received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
equipe	1.3.6.1.4.1.5022
eqAtmMib	1.3.6.1.4.1.5022.2			This is the Equipe ATM MIB module.
eqAtmStatsTable	1.3.6.1.4.1.5022.2.1		not-accessible	This table contains stats for an ATM logical port.
eqAtmStatsEntry	1.3.6.1.4.1.5022.2.1.1		not-accessible	An ATM logical port stats entry.
INT eqAtmStatsIfIndex	1.3.6.1.4.1.5022.2.1.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
C64 eqAtmStatsInCellsEx	1.3.6.1.4.1.5022.2.1.1.2	Counter64	read-only	The number of cells received.
C64 eqAtmStatsInCellsPerSecond	1.3.6.1.4.1.5022.2.1.1.3	Counter64	read-only	The number of cells received per second.
C64 eqAtmStatsInBitsPerSecond	1.3.6.1.4.1.5022.2.1.1.4	Counter64	read-only	The number of bits received per second.
C64 eqAtmStatsInCellsClp0	1.3.6.1.4.1.5022.2.1.1.5	Counter64	read-only	The number of CLP-0 cells received.
C64 eqAtmStatsInCellsClp1	1.3.6.1.4.1.5022.2.1.1.6	Counter64	read-only	The number of CLP-1 cells received.
C64 eqAtmStatsInCellsTagged	1.3.6.1.4.1.5022.2.1.1.7	Counter64	read-only	The number of tagged cells received.
C64 eqAtmStatsInCellsClp0Discards	1.3.6.1.4.1.5022.2.1.1.8	Counter64	read-only	The number of CLP-0 cells received and discarded.
C64 eqAtmStatsInCellsClp1Discards	1.3.6.1.4.1.5022.2.1.1.9	Counter64	read-only	The number of CLP-1 cells received and discarded.
C64 eqAtmStatsInCellsOam	1.3.6.1.4.1.5022.2.1.1.10	Counter64	read-only	The number of OAM cells received.
C64 eqAtmStatsInCellsClp0Oam	1.3.6.1.4.1.5022.2.1.1.11	Counter64	read-only	The number of CLP-0 OAM cells received.
C64 eqAtmStatsInCellsClp1Oam	1.3.6.1.4.1.5022.2.1.1.12	Counter64	read-only	The number of CLP-1 OAM cells received.
C64 eqAtmStatsInCellsLoopback	1.3.6.1.4.1.5022.2.1.1.13	Counter64	read-only	The number of loopback cells received.
C64 eqAtmStatsInCellsLoopbackOam	1.3.6.1.4.1.5022.2.1.1.14	Counter64	read-only	The number of loopback OAM cells received.
C64 eqAtmStatsOutCells	1.3.6.1.4.1.5022.2.1.1.15	Counter64	read-only	The number of cells transmitted.
C64 eqAtmStatsOutCellsPerSecond	1.3.6.1.4.1.5022.2.1.1.16	Counter64	read-only	The number of cells transmitted per second.
C64 eqAtmStatsOutBitsPerSecond	1.3.6.1.4.1.5022.2.1.1.17	Counter64	read-only	The number of bits transmitted per second.
C64 eqAtmStatsOutCellsClp0	1.3.6.1.4.1.5022.2.1.1.18	Counter64	read-only	The number of CLP-0 cells transmitted.
C64 eqAtmStatsOutCellsClp1	1.3.6.1.4.1.5022.2.1.1.19	Counter64	read-only	The number of CLP-1 cells transmitted.
C64 eqAtmStatsOutCellsTagged	1.3.6.1.4.1.5022.2.1.1.20	Counter64	read-only	The number of tagged cells transmitted.
C64 eqAtmStatsOutCellsClp0Discards	1.3.6.1.4.1.5022.2.1.1.21	Counter64	read-only	The number of CLP-0 cells discarded due to lack of resources.
C64 eqAtmStatsOutCellsClp1Discards	1.3.6.1.4.1.5022.2.1.1.22	Counter64	read-only	The number of CLP-1 cells discarded due to lack of resources.
C64 eqAtmStatsOutCellsOam	1.3.6.1.4.1.5022.2.1.1.23	Counter64	read-only	The number of OAM cells transmitted.
C64 eqAtmStatsOutCellsClp0Oam	1.3.6.1.4.1.5022.2.1.1.24	Counter64	read-only	The number of CLP-0 OAM cells transmitted.
C64 eqAtmStatsOutCellsClp1Oam	1.3.6.1.4.1.5022.2.1.1.25	Counter64	read-only	The number of CLP-1 OAM cells transmitted.
C64 eqAtmStatsOutCellsLoopback	1.3.6.1.4.1.5022.2.1.1.26	Counter64	read-only	The number of loopback cells transmitted.
C64 eqAtmStatsOutCellsLoopbackOam	1.3.6.1.4.1.5022.2.1.1.27	Counter64	read-only	The number of loopback OAM cells transmitted.
INT eqAtmStatsCLR	1.3.6.1.4.1.5022.2.1.1.28	INTEGER	read-only	The cell loss ratio requirement, expressed as a negative exponent of 10. The default value of 512 indicates any cell loss ratio is acceptable.
eqAtmSvcStatsTable	1.3.6.1.4.1.5022.2.2		not-accessible	This table contains svc stats for an ATM logical port.
eqAtmSvcStatsEntry	1.3.6.1.4.1.5022.2.2.1		not-accessible	An ATM logical port svc stats entry.
INT eqAtmSvcStatsIfIndex	1.3.6.1.4.1.5022.2.2.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
C32 eqAtmSvcTotal	1.3.6.1.4.1.5022.2.2.1.2	Counter32	read-only	The total number of svc's established on this port.
C32 eqAtmSvcConnected	1.3.6.1.4.1.5022.2.2.1.3	Counter32	read-only	The number of svc's currently active on this port.
C32 eqAtmSvcFailures	1.3.6.1.4.1.5022.2.2.1.4	Counter32	read-only	The number of svc configuration failures on this port.
ATM eqAtmSvcInLastCauseCode	1.3.6.1.4.1.5022.2.2.1.5	AtmCauseCode	read-only	The last cause code received on this port.
C32 eqAtmSvcInSetupPdus	1.3.6.1.4.1.5022.2.2.1.6	Counter32	read-only	The number of setup pdu's received on this port.
C32 eqAtmSvcInCallProceeding	1.3.6.1.4.1.5022.2.2.1.7	Counter32	read-only	The number of call proceeding pdu's received on this port.
C32 eqAtmSvcInPdusConnect	1.3.6.1.4.1.5022.2.2.1.8	Counter32	read-only	The number of connect pdu's received on this port.
C32 eqAtmSvcInPdusConnectAck	1.3.6.1.4.1.5022.2.2.1.9	Counter32	read-only	The number of connect ack pdu's received on this port.
C32 eqAtmSvcInPdusReleaseComplete	1.3.6.1.4.1.5022.2.2.1.10	Counter32	read-only	The number of release complete pdu's received on this port.
C32 eqAtmSvcInPdusAddParty	1.3.6.1.4.1.5022.2.2.1.11	Counter32	read-only	The number of add party pdu's received on this port.
C32 eqAtmSvcInPdusAddPartyAck	1.3.6.1.4.1.5022.2.2.1.12	Counter32	read-only	The number of add party ack pdu's received on this port.
C32 eqAtmSvcInPdusAddPartyReject	1.3.6.1.4.1.5022.2.2.1.13	Counter32	read-only	The number of add party reject pdu's received on this port.
C32 eqAtmSvcInPdusDropParty	1.3.6.1.4.1.5022.2.2.1.14	Counter32	read-only	The number of drop party pdu's received on this port.
C32 eqAtmSvcInPdusDropPartyAck	1.3.6.1.4.1.5022.2.2.1.15	Counter32	read-only	The number of drop party ack pdu's received on this port.
C32 eqAtmSvcInPdusStatusEnquiry	1.3.6.1.4.1.5022.2.2.1.16	Counter32	read-only	The number of status enquiry pdu's received on this port.
C32 eqAtmSvcInPdusStatus	1.3.6.1.4.1.5022.2.2.1.17	Counter32	read-only	The number of status pdu's received on this port.
C32 eqAtmSvcInPdusRestart	1.3.6.1.4.1.5022.2.2.1.18	Counter32	read-only	The number of restart pdu's received on this port.
C32 eqAtmSvcInPdusRestartAck	1.3.6.1.4.1.5022.2.2.1.19	Counter32	read-only	The number of restart ack pdu's received on this port.
C32 eqAtmSvcInPdusNotify	1.3.6.1.4.1.5022.2.2.1.20	Counter32	read-only	The number of notify pdu's received on this port.
C32 eqAtmSvcInPdusProgress	1.3.6.1.4.1.5022.2.2.1.21	Counter32	read-only	The number of progress pdu's received on this port.
C32 eqAtmSvcInPdusAlerting	1.3.6.1.4.1.5022.2.2.1.22	Counter32	read-only	The number of alerting pdu's received on this port.
C32 eqAtmSvcInPdusPartyAlerting	1.3.6.1.4.1.5022.2.2.1.23	Counter32	read-only	The number of party alerting pdu's received on this port.
ATM eqAtmSvcOutLastCauseCode	1.3.6.1.4.1.5022.2.2.1.24	AtmCauseCode	read-only	The last cause code transmitted on this port.
C32 eqAtmSvcOutSetupPdus	1.3.6.1.4.1.5022.2.2.1.25	Counter32	read-only	The number of setup pdu's transmitted on this port.
C32 eqAtmSvcOutCallProceeding	1.3.6.1.4.1.5022.2.2.1.26	Counter32	read-only	The number of call proceeding pdu's transmitted on this port.
C32 eqAtmSvcOutPdusConnect	1.3.6.1.4.1.5022.2.2.1.27	Counter32	read-only	The number of connect pdu's transmitted on this port.
C32 eqAtmSvcOutPdusConnectAck	1.3.6.1.4.1.5022.2.2.1.28	Counter32	read-only	The number of connect ack pdu's transmitted on this port.
C32 eqAtmSvcOutPdusReleaseComplete	1.3.6.1.4.1.5022.2.2.1.29	Counter32	read-only	The number of release complete pdu's transmitted on this port.
C32 eqAtmSvcOutPdusAddParty	1.3.6.1.4.1.5022.2.2.1.30	Counter32	read-only	The number of add party pdu's transmitted on this port.
C32 eqAtmSvcOutPdusAddPartyAck	1.3.6.1.4.1.5022.2.2.1.31	Counter32	read-only	The number of add party ack pdu's transmitted on this port.
C32 eqAtmSvcOutPdusAddPartyReject	1.3.6.1.4.1.5022.2.2.1.32	Counter32	read-only	The number of add party reject pdu's transmitted on this port.
C32 eqAtmSvcOutPdusDropParty	1.3.6.1.4.1.5022.2.2.1.33	Counter32	read-only	The number of drop party pdu's transmitted on this port.
C32 eqAtmSvcOutPdusDropPartyAck	1.3.6.1.4.1.5022.2.2.1.34	Counter32	read-only	The number of drop party ack pdu's transmitted on this port.
C32 eqAtmSvcOutPdusStatusEnquiry	1.3.6.1.4.1.5022.2.2.1.35	Counter32	read-only	The number of status enquiry pdu's transmitted on this port.
C32 eqAtmSvcOutPdusStatus	1.3.6.1.4.1.5022.2.2.1.36	Counter32	read-only	The number of status pdu's transmitted on this port.
C32 eqAtmSvcOutPdusRestart	1.3.6.1.4.1.5022.2.2.1.37	Counter32	read-only	The number of restart pdu's transmitted on this port.
C32 eqAtmSvcOutPdusRestartAck	1.3.6.1.4.1.5022.2.2.1.38	Counter32	read-only	The number of restart ack pdu's transmitted on this port.
C32 eqAtmSvcOutPdusNotify	1.3.6.1.4.1.5022.2.2.1.39	Counter32	read-only	The number of notify pdu's transmitted on this port.
C32 eqAtmSvcOutPdusProgress	1.3.6.1.4.1.5022.2.2.1.40	Counter32	read-only	The number of progress pdu's transmitted on this port.
C32 eqAtmSvcOutPdusAlerting	1.3.6.1.4.1.5022.2.2.1.41	Counter32	read-only	The number of alerting pdu's transmitted on this port.
C32 eqAtmSvcOutPdusPartyAlerting	1.3.6.1.4.1.5022.2.2.1.42	Counter32	read-only	The number of party alerting pdu's transmitted on this port.
eqAtmSaalStatsTable	1.3.6.1.4.1.5022.2.3		not-accessible	This table contains SAAL stats for an ATM logical port.
eqAtmSaalStatsEntry	1.3.6.1.4.1.5022.2.3.1		not-accessible	An ATM logical port SAAL stats entry.
INT eqAtmSaalStatsIfIndex	1.3.6.1.4.1.5022.2.3.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
C32 eqAtmSaalInErrors	1.3.6.1.4.1.5022.2.3.1.2	Counter32	read-only	The number of receive errors on this port.
C32 eqAtmSaalInDiscards	1.3.6.1.4.1.5022.2.3.1.3	Counter32	read-only	The number of discards on this port.
C32 eqAtmSaalInBeginPdus	1.3.6.1.4.1.5022.2.3.1.4	Counter32	read-only	The number of begin pdus received on this port.
C32 eqAtmSaalInBeginAckPdus	1.3.6.1.4.1.5022.2.3.1.5	Counter32	read-only	The number of begin ack pdus received on this port.
C32 eqAtmSaalInBeginRejectPdus	1.3.6.1.4.1.5022.2.3.1.6	Counter32	read-only	The number of begin reject pdus received on this port.
C32 eqAtmSaalInEndPdus	1.3.6.1.4.1.5022.2.3.1.7	Counter32	read-only	The number of end pdus received on this port.
C32 eqAtmSaalInEndAckPdus	1.3.6.1.4.1.5022.2.3.1.8	Counter32	read-only	The number of end ack pdus received on this port.
C32 eqAtmSaalInResyncPdus	1.3.6.1.4.1.5022.2.3.1.9	Counter32	read-only	The number of resync pdus received on this port.
C32 eqAtmSaalInResyncAckPdus	1.3.6.1.4.1.5022.2.3.1.10	Counter32	read-only	The number of resync ack pdus received on this port.
C32 eqAtmSaalInErrRecoveryPdus	1.3.6.1.4.1.5022.2.3.1.11	Counter32	read-only	The number of error recovery pdus received on this port.
C32 eqAtmSaalInSeqDataPdus	1.3.6.1.4.1.5022.2.3.1.12	Counter32	read-only	The number of sequence data pdus received on this port.
C32 eqAtmSaalInPollPdus	1.3.6.1.4.1.5022.2.3.1.13	Counter32	read-only	The number of poll pdus received on this port.
C32 eqAtmSaalInStatusPdus	1.3.6.1.4.1.5022.2.3.1.14	Counter32	read-only	The number of status pdus received on this port.
C32 eqAtmSaalInUnsolicitedStatusPdus	1.3.6.1.4.1.5022.2.3.1.15	Counter32	read-only	The number of unsolicited status pdus received on this port.
C32 eqAtmSaalInUnsolicitedUserPdus	1.3.6.1.4.1.5022.2.3.1.16	Counter32	read-only	The number of unsolicited user pdus received on this port.
C32 eqAtmSaalInUnnumberedUserPdus	1.3.6.1.4.1.5022.2.3.1.17	Counter32	read-only	The number of unnumbered pdus received on this port.
C32 eqAtmSaalInUnnumberedMgmtPdus	1.3.6.1.4.1.5022.2.3.1.18	Counter32	read-only	The number of unnumbered mgmt pdus received on this port.
C32 eqAtmSaalInSignalOctets	1.3.6.1.4.1.5022.2.3.1.19	Counter32	read-only	The number of signal octets transmitted on this port.
C32 eqAtmSaalOutDiscards	1.3.6.1.4.1.5022.2.3.1.20	Counter32	read-only	The number of begin pdus transmitted on this port.
C32 eqAtmSaalOutBeginPdus	1.3.6.1.4.1.5022.2.3.1.21	Counter32	read-only	The number of begin pdus transmitted on this port.
C32 eqAtmSaalOutBeginAckPdus	1.3.6.1.4.1.5022.2.3.1.22	Counter32	read-only	The number of begin ack pdus transmitted on this port.
C32 eqAtmSaalOutBeginRejectPdus	1.3.6.1.4.1.5022.2.3.1.23	Counter32	read-only	The number of begin reject pdus transmitted on this port.
C32 eqAtmSaalOutEndPdus	1.3.6.1.4.1.5022.2.3.1.24	Counter32	read-only	The number of end pdus transmitted on this port.
C32 eqAtmSaalOutEndAckPdus	1.3.6.1.4.1.5022.2.3.1.25	Counter32	read-only	The number of end ack pdus transmitted on this port.
C32 eqAtmSaalOutResyncPdus	1.3.6.1.4.1.5022.2.3.1.26	Counter32	read-only	The number of resync pdus transmitted on this port.
C32 eqAtmSaalOutResyncAckPdus	1.3.6.1.4.1.5022.2.3.1.27	Counter32	read-only	The number of resync ack pdus transmitted on this port.
C32 eqAtmSaalOutErrRecoveryPdus	1.3.6.1.4.1.5022.2.3.1.28	Counter32	read-only	The number of error recovery pdus transmitted on this port.
C32 eqAtmSaalOutSeqDataPdus	1.3.6.1.4.1.5022.2.3.1.29	Counter32	read-only	The number of sequence data pdus transmitted on this port.
C32 eqAtmSaalOutPollPdus	1.3.6.1.4.1.5022.2.3.1.30	Counter32	read-only	The number of poll pdus transmitted on this port.
C32 eqAtmSaalOutStatusPdus	1.3.6.1.4.1.5022.2.3.1.31	Counter32	read-only	The number of status pdus transmitted on this port.
C32 eqAtmSaalOutUnsolicitedStatusPdus	1.3.6.1.4.1.5022.2.3.1.32	Counter32	read-only	The number of unsolicited status pdus transmitted on this port.
C32 eqAtmSaalOutUnsolicitedUserPdus	1.3.6.1.4.1.5022.2.3.1.33	Counter32	read-only	The number of unsolicited user pdus transmitted on this port.
C32 eqAtmSaalOutUnnumberedUserPdus	1.3.6.1.4.1.5022.2.3.1.34	Counter32	read-only	The number of unnumbered pdus transmitted on this port.
C32 eqAtmSaalOutUnnumberedMgmtPdus	1.3.6.1.4.1.5022.2.3.1.35	Counter32	read-only	The number of unnumbered mgmt pdus transmitted on this port.
C32 eqAtmSaalOutSignalOctets	1.3.6.1.4.1.5022.2.3.1.36	Counter32	read-only	The number of signal octets transmitted on this port.
INT eqAtmSaalOutWindowSize	1.3.6.1.4.1.5022.2.3.1.37	INTEGER	read-only	The window size for SAAL on this port.
eqAtmVcStatsTable	1.3.6.1.4.1.5022.2.4		not-accessible	This table contains stats for an ATM logical port.
eqAtmVcStatsEntry	1.3.6.1.4.1.5022.2.4.1		not-accessible	An ATM logical port stats entry.
INT eqAtmVcStatsIfIndex	1.3.6.1.4.1.5022.2.4.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
INT eqAtmVcStatsVpi	1.3.6.1.4.1.5022.2.4.1.2	INTEGER	read-only	The Virtual Path Identifier.
INT eqAtmVcStatsVci	1.3.6.1.4.1.5022.2.4.1.3	INTEGER	read-only	The Virtual Channel Identifier.
C64 eqAtmVcStatsInCells	1.3.6.1.4.1.5022.2.4.1.4	Counter64	read-only	The number of cells received.
C64 eqAtmVcStatsInCellsPerSecond	1.3.6.1.4.1.5022.2.4.1.5	Counter64	read-only	The number of cells received per second.
C64 eqAtmVcStatsInBitsPerSecond	1.3.6.1.4.1.5022.2.4.1.6	Counter64	read-only	The number of bits received per second.
C64 eqAtmVcStatsInCellsClp0	1.3.6.1.4.1.5022.2.4.1.7	Counter64	read-only	The number of CLP-0 cells received.
C64 eqAtmVcStatsInCellsClp1	1.3.6.1.4.1.5022.2.4.1.8	Counter64	read-only	The number of CLP-1 cells received.
C64 eqAtmVcStatsInCellsTagged	1.3.6.1.4.1.5022.2.4.1.9	Counter64	read-only	The number of tagged cells received.
C64 eqAtmVcStatsInCellsClp0Discards	1.3.6.1.4.1.5022.2.4.1.10	Counter64	read-only	The number of CLP-0 cells received and discarded.
C64 eqAtmVcStatsInCellsClp1Discards	1.3.6.1.4.1.5022.2.4.1.11	Counter64	read-only	The number of CLP-1 cells received and discarded.
C64 eqAtmVcStatsInCellsOam	1.3.6.1.4.1.5022.2.4.1.12	Counter64	read-only	The number of OAM cells received.
C64 eqAtmVcStatsInCellsClp0Oam	1.3.6.1.4.1.5022.2.4.1.13	Counter64	read-only	The number of CLP-0 OAM cells received.
C64 eqAtmVcStatsInCellsClp1Oam	1.3.6.1.4.1.5022.2.4.1.14	Counter64	read-only	The number of CLP-1 OAM cells received.
C64 eqAtmVcStatsInCellsLoopback	1.3.6.1.4.1.5022.2.4.1.15	Counter64	read-only	The number of loopback cells received.
C64 eqAtmVcStatsInCellsLoopbackOam	1.3.6.1.4.1.5022.2.4.1.16	Counter64	read-only	The number of loopback OAM cells received.
C64 eqAtmVcStatsOutCells	1.3.6.1.4.1.5022.2.4.1.17	Counter64	read-only	The number of cells transmitted.
C64 eqAtmVcStatsOutCellsPerSecond	1.3.6.1.4.1.5022.2.4.1.18	Counter64	read-only	The number of cells transmitted per second.
C64 eqAtmVcStatsOutBitsPerSecond	1.3.6.1.4.1.5022.2.4.1.19	Counter64	read-only	The number of bits transmitted per second.
C64 eqAtmVcStatsOutCellsClp0	1.3.6.1.4.1.5022.2.4.1.20	Counter64	read-only	The number of CLP-0 cells transmitted.
C64 eqAtmVcStatsOutCellsClp1	1.3.6.1.4.1.5022.2.4.1.21	Counter64	read-only	The number of CLP-1 cells transmitted.
C64 eqAtmVcStatsOutCellsTagged	1.3.6.1.4.1.5022.2.4.1.22	Counter64	read-only	The number of tagged cells transmitted.
C64 eqAtmVcStatsOutCellsClp0Discards	1.3.6.1.4.1.5022.2.4.1.23	Counter64	read-only	The number of CLP-0 cells discarded due to lack of resources.
C64 eqAtmVcStatsOutCellsClp1Discards	1.3.6.1.4.1.5022.2.4.1.24	Counter64	read-only	The number of CLP-1 cells discarded due to lack of resources.
C64 eqAtmVcStatsOutCellsOam	1.3.6.1.4.1.5022.2.4.1.25	Counter64	read-only	The number of OAM cells transmitted.
C64 eqAtmVcStatsOutCellsClp0Oam	1.3.6.1.4.1.5022.2.4.1.26	Counter64	read-only	The number of CLP-0 OAM cells transmitted.
C64 eqAtmVcStatsOutCellsClp1Oam	1.3.6.1.4.1.5022.2.4.1.27	Counter64	read-only	The number of CLP-1 OAM cells transmitted.
C64 eqAtmVcStatsOutCellsLoopback	1.3.6.1.4.1.5022.2.4.1.28	Counter64	read-only	The number of loopback cells transmitted.
C64 eqAtmVcStatsOutCellsLoopbackOam	1.3.6.1.4.1.5022.2.4.1.29	Counter64	read-only	The number of loopback OAM cells transmitted.
INT eqAtmVcStatsCLR	1.3.6.1.4.1.5022.2.4.1.30	INTEGER	read-only	The cell loss ratio requirement, expressed as a negative exponent of 10. The default value of 512 indicates any cell loss ratio is acceptable.
eqAtmOamPmTable	1.3.6.1.4.1.5022.2.5		not-accessible	This table contains OAM Performance Monitoring stats for an ATM OAM PM Session.
eqAtmOamPmEntry	1.3.6.1.4.1.5022.2.5.1		not-accessible	An ATM logical port stats entry.
INT eqAtmOamPmIfIndex	1.3.6.1.4.1.5022.2.5.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
INT eqAtmOamPmVpi	1.3.6.1.4.1.5022.2.5.1.2	INTEGER	read-only	The Virtual Path Identifier.
INT eqAtmOamPmVci	1.3.6.1.4.1.5022.2.5.1.3	INTEGER	read-only	The Virtual Channel Identifier.
INT eqAtmOamPmStatus	1.3.6.1.4.1.5022.2.5.1.4	INTEGER	read-only	Indicates whether the activation process is in the middle of activating, has successfully connected, has failed to connect because the remote end did not respond, or couldn't setup the connection because of lack of local resources.
INT eqAtmOamPmSessionType	1.3.6.1.4.1.5022.2.5.1.5	INTEGER	read-only	Identifies the PM session to perform Continuity Check or Performance Monitoring.
INT eqAtmOamPmSinkSource	1.3.6.1.4.1.5022.2.5.1.6	INTEGER	read-only	Identifies the PM session to be sink, source, or both.
INT eqAtmOamPmBlockSize	1.3.6.1.4.1.5022.2.5.1.7	INTEGER	read-only	The Block Size of User cells transmitted before an OAM PM cell is transmitted.
INT eqAtmOamPmEndPt	1.3.6.1.4.1.5022.2.5.1.8	INTEGER	read-only	Identifies the PM Session as either a Segment Endpoint or an End-to-End Point
INT eqAtmOamPmFlow	1.3.6.1.4.1.5022.2.5.1.9	INTEGER	read-only	Identifies the Flow as either an F4 (Virtual Path) or F5 (Virtual Channel) flow.
INT eqAtmOamPmDirection	1.3.6.1.4.1.5022.2.5.1.10	INTEGER	read-only	Identifies the direction as either Forward (Egress, toward the outside netword) or Backward (Ingress, toward the switch fabric)
INT eqAtmOamPmTimeout	1.3.6.1.4.1.5022.2.5.1.11	INTEGER	read-only	Identifies the Time Period in which to timeout an Activation/DeActivation Cell (in which case another cell may be sent depending on the Retry Count).
INT eqAtmOamPmRetryCount	1.3.6.1.4.1.5022.2.5.1.12	INTEGER	read-only	Number of times to retry Activation in the event of a failure (no response).
C32 eqAtmOamPmFwdTxUserCellsClp0	1.3.6.1.4.1.5022.2.5.1.13	Counter32	read-only	The number of Clp0 cells transmitted.
C32 eqAtmOamPmFwdTxUserCellsClp01	1.3.6.1.4.1.5022.2.5.1.14	Counter32	read-only	The number of Clp0 plus Clp1 cells transmitted.
C32 eqAtmOamPmFwdTxLostCellsClp0	1.3.6.1.4.1.5022.2.5.1.15	Counter32	read-only	The number of Clp0 cells Lost.
C32 eqAtmOamPmFwdTxLostCellsClp01	1.3.6.1.4.1.5022.2.5.1.16	Counter32	read-only	The number of Clp0 plus Clp1 cells Lost.
C32 eqAtmOamPmFwdSECBs	1.3.6.1.4.1.5022.2.5.1.17	Counter32	read-only	The number of Severely Errored Cell Blocks.
C32 eqAtmOamPmBwdTxUserCellsClp0	1.3.6.1.4.1.5022.2.5.1.18	Counter32	read-only	The number of Clp0 cells transmitted.
C32 eqAtmOamPmBwdTxUserCellsClp01	1.3.6.1.4.1.5022.2.5.1.19	Counter32	read-only	The number of Clp0 plus Clp1 cells transmitted.
C32 eqAtmOamPmBwdTxLostCellsClp0	1.3.6.1.4.1.5022.2.5.1.20	Counter32	read-only	The number of Clp0 cells Lost.
C32 eqAtmOamPmBwdTxLostCellsClp01	1.3.6.1.4.1.5022.2.5.1.21	Counter32	read-only	The number of Clp0 plus Clp1 cells Lost.
C32 eqAtmOamPmBwdSECBs	1.3.6.1.4.1.5022.2.5.1.22	Counter32	read-only	The number of Severely Errored Cell Blocks.
eqAtmOamLoopbackTable	1.3.6.1.4.1.5022.2.6		not-accessible	This table contains OAM Performance Monitoring stats for an ATM OAM PM Session.
eqAtmOamLoopbackEntry	1.3.6.1.4.1.5022.2.6.1		not-accessible	An ATM logical port stats entry.
INT eqAtmOamLoopbackIfIndex	1.3.6.1.4.1.5022.2.6.1.1	INTEGER	read-only	The ifIndex for the corresponding atm logical port.
INT eqAtmOamLoopbackVpi	1.3.6.1.4.1.5022.2.6.1.2	INTEGER	read-only	The Virtual Path Identifier.
INT eqAtmOamLoopbackVci	1.3.6.1.4.1.5022.2.6.1.3	INTEGER	read-only	The Virtual Channel Identifier.
INT eqAtmOamLoopbackStatus	1.3.6.1.4.1.5022.2.6.1.4	INTEGER	read-only	Indicates whether the Loopback request is being worked on or has completed.
INT eqAtmOamLoopbackSendCount	1.3.6.1.4.1.5022.2.6.1.5	INTEGER	read-only	Indicates the number of Loopback Cells to send.
INT eqAtmOamLoopbackSendTrap	1.3.6.1.4.1.5022.2.6.1.6	INTEGER	read-only	Indicates whether or not to send an SNMP trap when finished.
INT eqAtmOamLoopbackEndPoint	1.3.6.1.4.1.5022.2.6.1.7	INTEGER	read-only	Indicates whether the Loopback Cell to be sent is a Segment or End-to-End Point type cell.
INT eqAtmOamLoopbackFlow	1.3.6.1.4.1.5022.2.6.1.8	INTEGER	read-only	Identifies the Flow as either an F4 (Virtual Path) or F5 (Virtual Channel) flow.
INT eqAtmOamLoopbackDirection	1.3.6.1.4.1.5022.2.6.1.9	INTEGER	read-only	Identifies the direction as either Forward (Egress, toward the outside netword) or Backward (Ingress, toward the switch fabric)
INT eqAtmOamLoopbackTimeout	1.3.6.1.4.1.5022.2.6.1.10	INTEGER	read-only	Indicates the Timeout (in seconds) to wait for a Loopback response before sending another (or finishing).
C32 eqAtmOamLoopbackCellsReceived	1.3.6.1.4.1.5022.2.6.1.11	Counter32	read-only	Count of the number of Loopback cell responses received succesfully.
C32 eqAtmOamLoopbackCellsTimedOut	1.3.6.1.4.1.5022.2.6.1.12	Counter32	read-only	Count of the number of Loopback cell responses not received succesfully.
INT eqAtmOamLoopbackAveCellTime	1.3.6.1.4.1.5022.2.6.1.13	INTEGER	read-only	Average response time (in milliseconds) for the Loopback Cell.
INT eqAtmOamLoopbackMinCellTime	1.3.6.1.4.1.5022.2.6.1.14	INTEGER	read-only	Minimum response time (in milliseconds) for the Loopback Cell.
INT eqAtmOamLoopbackMaxCellTime	1.3.6.1.4.1.5022.2.6.1.15	INTEGER	read-only	Maximum response time (in milliseconds) for the Loopback Cell.
INT eqAtmOamLoopbackTotalCellTime	1.3.6.1.4.1.5022.2.6.1.16	INTEGER	read-only	Total response time (in milliseconds) for all Loopback Cells of the session.

RFC description

Equipe Communications ATM (Asynchronous Transfer Mode) network management MIB.

Start monitoring Equipe Communications (later Ciena) ATM/optical transport equipment (ATM PVC configuration/cell statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EQUIPE-ATM-MIB

What Is EQUIPE-ATM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description