EQUIPE-ATM-MIB DEFINITIONS ::= BEGIN -- -- Equipe ATM MIB -- IMPORTS enterprises FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; equipe OBJECT IDENTIFIER ::= { enterprises 5022 } eqAtmMib MODULE-IDENTITY LAST-UPDATED "0009170000Z" ORGANIZATION "" CONTACT-INFO "Jas Parmar Equipe Communications 100 Nagog Park Acton MA 01720" DESCRIPTION "This is the Equipe ATM MIB module." ::= { equipe 2 } -- -- ATM Cause codes TC. -- AtmCauseCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The atm last cause code values." SYNTAX INTEGER { none(1), -- none unallocNumber(2), -- unallocated number noRouteToTransitNet(3), -- no route to tansit net noRouteToDest(4), -- no route to dest vccUnacceptable30(5), -- VPI/VCI unacceptable (UNI 3.0) normalCallCleared31(6), -- normal call cleared userBusy(7), -- user busy noUserResponse(8), -- no user response callRejected(9), -- call rejected numberChanged(10), -- number changed callRejectCLIR(11), -- user rejects all calls with CLIR destOutOfOrder(12), -- destn out of order invalidNumberFormat(13), -- invalid number format respToStatusEnquiry(14), -- response to status enquiry normalUnspecified(15), -- normal unspecified reqVccUnavailable(16), -- requested VPI/VCI unavailable vccFail31(17), -- VPI/VCI assignment failure rateUnavailable31(18), -- rate unavailable networkOutOfOrder(19), -- network out of order tempFailure(20), -- temp failure accessInfoDiscarded(21), -- access info discarded resourcesUnavailable(22), -- resource unavailable qosUnavailable(23), -- QoS unavailable rateUnavailable(24), -- call rate unavailable bcapNotAuthorised(25), -- bearer caps not authorised bcapUnavailable(26), -- bearer caps unavailable serviceUnavailable(27), -- service or option unavailable bcapNotImplemented(28), -- bearer cap not implemented combinationUnsupported(29), -- unsupported mix of traffic params aalParamsUnsupported31(30), -- unsupported aal params invalidCallReference(31), -- invalid call reference noChannel(32), -- channel does not exist destIncompatible(33), -- incomptible destination invalidEndpointRef(34), -- invalid endpoint invalidTransitNet(35), -- invalid transit net tooManyAddPartyRequests(36),-- too many add party requests aalParamsUnsupported30(37), -- aal params unsupported infoELementMissing(38), -- mandatory info element missing msgTypeNotImplemented(39), -- msg type not implemented infoElementNotImplemented(40), -- info element not implemented invalidInfoElement(41), -- invalid info element msgNotCompatible(42), -- msg not comptaible with call state timerRecovery(43), -- timer expired recovery invalidMsgLen(44), -- invalid msg len protocolError(45), -- protocol error opticalElementError(46), -- optical element error noRouteToNextNode(47), -- no route to next node dtlNotMyNode(48) -- not my node } -- -- ATM Logical Port Stats Table. -- eqAtmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains stats for an ATM logical port." ::= { eqAtmMib 1 } eqAtmStatsEntry OBJECT-TYPE SYNTAX EqAtmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port stats entry." INDEX { eqAtmStatsIfIndex } ::= { eqAtmStatsTable 1 } EqAtmStatsEntry ::= SEQUENCE { eqAtmStatsIfIndex INTEGER, eqAtmStatsInCells Counter64, eqAtmStatsInCellsPerSecond Counter64, eqAtmStatsInBitsPerSecond Counter64, eqAtmStatsInCellsClp0 Counter64, eqAtmStatsInCellsClp1 Counter64, eqAtmStatsInCellsTagged Counter64, eqAtmStatsInCellsClp0Discards Counter64, eqAtmStatsInCellsClp1Discards Counter64, eqAtmStatsInCellsOam Counter64, eqAtmStatsInCellsClp0Oam Counter64, eqAtmStatsInCellsClp1Oam Counter64, eqAtmStatsInCellsLoopback Counter64, eqAtmStatsInCellsLoopbackOam Counter64, eqAtmStatsOutCells Counter64, eqAtmStatsOutCellsPerSecond Counter64, eqAtmStatsOutBitsPerSecond Counter64, eqAtmStatsOutCellsClp0 Counter64, eqAtmStatsOutCellsClp1 Counter64, eqAtmStatsOutCellsTagged Counter64, eqAtmStatsOutCellsClp0Discards Counter64, eqAtmStatsOutCellsClp1Discards Counter64, eqAtmStatsOutCellsOam Counter64, eqAtmStatsOutCellsClp0Oam Counter64, eqAtmStatsOutCellsClp1Oam Counter64, eqAtmStatsOutCellsLoopback Counter64, eqAtmStatsOutCellsLoopbackOam Counter64, eqAtmStatsCLR INTEGER } eqAtmStatsIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmStatsEntry 1 } eqAtmStatsInCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells received." ::= { eqAtmStatsEntry 2 } eqAtmStatsInCellsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells received per second." ::= { eqAtmStatsEntry 3 } eqAtmStatsInBitsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits received per second." ::= { eqAtmStatsEntry 4 } eqAtmStatsInCellsClp0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells received." ::= { eqAtmStatsEntry 5 } eqAtmStatsInCellsClp1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells received." ::= { eqAtmStatsEntry 6 } eqAtmStatsInCellsTagged OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tagged cells received." ::= { eqAtmStatsEntry 7 } eqAtmStatsInCellsClp0Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells received and discarded." ::= { eqAtmStatsEntry 8 } eqAtmStatsInCellsClp1Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells received and discarded." ::= { eqAtmStatsEntry 9 } eqAtmStatsInCellsOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OAM cells received." ::= { eqAtmStatsEntry 10 } eqAtmStatsInCellsClp0Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 OAM cells received." ::= { eqAtmStatsEntry 11 } eqAtmStatsInCellsClp1Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 OAM cells received." ::= { eqAtmStatsEntry 12 } eqAtmStatsInCellsLoopback OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback cells received." ::= { eqAtmStatsEntry 13 } eqAtmStatsInCellsLoopbackOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback OAM cells received." ::= { eqAtmStatsEntry 14 } eqAtmStatsOutCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells transmitted." ::= { eqAtmStatsEntry 15 } eqAtmStatsOutCellsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells transmitted per second." ::= { eqAtmStatsEntry 16 } eqAtmStatsOutBitsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits transmitted per second." ::= { eqAtmStatsEntry 17 } eqAtmStatsOutCellsClp0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells transmitted." ::= { eqAtmStatsEntry 18 } eqAtmStatsOutCellsClp1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells transmitted." ::= { eqAtmStatsEntry 19 } eqAtmStatsOutCellsTagged OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tagged cells transmitted." ::= { eqAtmStatsEntry 20 } eqAtmStatsOutCellsClp0Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells discarded due to lack of resources." ::= { eqAtmStatsEntry 21 } eqAtmStatsOutCellsClp1Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells discarded due to lack of resources." ::= { eqAtmStatsEntry 22 } eqAtmStatsOutCellsOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OAM cells transmitted." ::= { eqAtmStatsEntry 23 } eqAtmStatsOutCellsClp0Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 OAM cells transmitted." ::= { eqAtmStatsEntry 24 } eqAtmStatsOutCellsClp1Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 OAM cells transmitted." ::= { eqAtmStatsEntry 25 } eqAtmStatsOutCellsLoopback OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback cells transmitted." ::= { eqAtmStatsEntry 26 } eqAtmStatsOutCellsLoopbackOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback OAM cells transmitted." ::= { eqAtmStatsEntry 27 } eqAtmStatsCLR OBJECT-TYPE SYNTAX INTEGER (0..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The cell loss ratio requirement, expressed as a negative exponent of 10. The default value of 512 indicates any cell loss ratio is acceptable." ::= { eqAtmStatsEntry 28 } -- -- ATM Logical Port SVC Stats Table. -- eqAtmSvcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmSvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains svc stats for an ATM logical port." ::= { eqAtmMib 2 } eqAtmSvcStatsEntry OBJECT-TYPE SYNTAX EqAtmSvcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port svc stats entry." INDEX { eqAtmSvcStatsIfIndex } ::= { eqAtmSvcStatsTable 1 } EqAtmSvcStatsEntry ::= SEQUENCE { eqAtmSvcStatsIfIndex INTEGER, eqAtmSvcTotal Counter32, eqAtmSvcConnected Counter32, eqAtmSvcFailures Counter32, eqAtmSvcInLastCauseCode AtmCauseCode, eqAtmSvcInSetupPdus Counter32, eqAtmSvcInCallProceeding Counter32, eqAtmSvcInPdusConnect Counter32, eqAtmSvcInPdusConnectAck Counter32, eqAtmSvcInPdusReleaseComplete Counter32, eqAtmSvcInPdusAddParty Counter32, eqAtmSvcInPdusAddPartyAck Counter32, eqAtmSvcInPdusAddPartyReject Counter32, eqAtmSvcInPdusDropParty Counter32, eqAtmSvcInPdusDropPartyAck Counter32, eqAtmSvcInPdusStatusEnquiry Counter32, eqAtmSvcInPdusStatus Counter32, eqAtmSvcInPdusRestart Counter32, eqAtmSvcInPdusRestartAck Counter32, eqAtmSvcInPdusNotify Counter32, eqAtmSvcInPdusProgress Counter32, eqAtmSvcInPdusAlerting Counter32, eqAtmSvcInPdusPartyAlerting Counter32, eqAtmSvcOutLastCauseCode AtmCauseCode, eqAtmSvcOutSetupPdus Counter32, eqAtmSvcOutCallProceeding Counter32, eqAtmSvcOutPdusConnect Counter32, eqAtmSvcOutPdusConnectAck Counter32, eqAtmSvcOutPdusReleaseComplete Counter32, eqAtmSvcOutPdusAddParty Counter32, eqAtmSvcOutPdusAddPartyAck Counter32, eqAtmSvcOutPdusAddPartyReject Counter32, eqAtmSvcOutPdusDropParty Counter32, eqAtmSvcOutPdusDropPartyAck Counter32, eqAtmSvcOutPdusStatusEnquiry Counter32, eqAtmSvcOutPdusStatus Counter32, eqAtmSvcOutPdusRestart Counter32, eqAtmSvcOutPdusRestartAck Counter32, eqAtmSvcOutPdusNotify Counter32, eqAtmSvcOutPdusProgress Counter32, eqAtmSvcOutPdusAlerting Counter32, eqAtmSvcOutPdusPartyAlerting Counter32 } eqAtmSvcStatsIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmSvcStatsEntry 1 } eqAtmSvcTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of svc's established on this port." ::= { eqAtmSvcStatsEntry 2 } eqAtmSvcConnected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of svc's currently active on this port." ::= { eqAtmSvcStatsEntry 3 } eqAtmSvcFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of svc configuration failures on this port." ::= { eqAtmSvcStatsEntry 4 } eqAtmSvcInLastCauseCode OBJECT-TYPE SYNTAX AtmCauseCode MAX-ACCESS read-only STATUS current DESCRIPTION "The last cause code received on this port." ::= { eqAtmSvcStatsEntry 5 } eqAtmSvcInSetupPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setup pdu's received on this port." ::= { eqAtmSvcStatsEntry 6 } eqAtmSvcInCallProceeding OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of call proceeding pdu's received on this port." ::= { eqAtmSvcStatsEntry 7 } eqAtmSvcInPdusConnect OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect pdu's received on this port." ::= { eqAtmSvcStatsEntry 8 } eqAtmSvcInPdusConnectAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect ack pdu's received on this port." ::= { eqAtmSvcStatsEntry 9 } eqAtmSvcInPdusReleaseComplete OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release complete pdu's received on this port." ::= { eqAtmSvcStatsEntry 10 } eqAtmSvcInPdusAddParty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party pdu's received on this port." ::= { eqAtmSvcStatsEntry 11 } eqAtmSvcInPdusAddPartyAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party ack pdu's received on this port." ::= { eqAtmSvcStatsEntry 12 } eqAtmSvcInPdusAddPartyReject OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party reject pdu's received on this port." ::= { eqAtmSvcStatsEntry 13 } eqAtmSvcInPdusDropParty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drop party pdu's received on this port." ::= { eqAtmSvcStatsEntry 14 } eqAtmSvcInPdusDropPartyAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drop party ack pdu's received on this port." ::= { eqAtmSvcStatsEntry 15 } eqAtmSvcInPdusStatusEnquiry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status enquiry pdu's received on this port." ::= { eqAtmSvcStatsEntry 16 } eqAtmSvcInPdusStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status pdu's received on this port." ::= { eqAtmSvcStatsEntry 17 } eqAtmSvcInPdusRestart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of restart pdu's received on this port." ::= { eqAtmSvcStatsEntry 18 } eqAtmSvcInPdusRestartAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of restart ack pdu's received on this port." ::= { eqAtmSvcStatsEntry 19 } eqAtmSvcInPdusNotify OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of notify pdu's received on this port." ::= { eqAtmSvcStatsEntry 20 } eqAtmSvcInPdusProgress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of progress pdu's received on this port." ::= { eqAtmSvcStatsEntry 21 } eqAtmSvcInPdusAlerting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alerting pdu's received on this port." ::= { eqAtmSvcStatsEntry 22 } eqAtmSvcInPdusPartyAlerting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of party alerting pdu's received on this port." ::= { eqAtmSvcStatsEntry 23 } eqAtmSvcOutLastCauseCode OBJECT-TYPE SYNTAX AtmCauseCode MAX-ACCESS read-only STATUS current DESCRIPTION "The last cause code transmitted on this port." ::= { eqAtmSvcStatsEntry 24 } eqAtmSvcOutSetupPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of setup pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 25 } eqAtmSvcOutCallProceeding OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of call proceeding pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 26 } eqAtmSvcOutPdusConnect OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 27 } eqAtmSvcOutPdusConnectAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connect ack pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 28 } eqAtmSvcOutPdusReleaseComplete OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of release complete pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 29 } eqAtmSvcOutPdusAddParty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 30 } eqAtmSvcOutPdusAddPartyAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party ack pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 31 } eqAtmSvcOutPdusAddPartyReject OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of add party reject pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 32 } eqAtmSvcOutPdusDropParty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drop party pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 33 } eqAtmSvcOutPdusDropPartyAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of drop party ack pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 34 } eqAtmSvcOutPdusStatusEnquiry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status enquiry pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 35 } eqAtmSvcOutPdusStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 36 } eqAtmSvcOutPdusRestart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of restart pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 37 } eqAtmSvcOutPdusRestartAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of restart ack pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 38 } eqAtmSvcOutPdusNotify OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of notify pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 39 } eqAtmSvcOutPdusProgress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of progress pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 40 } eqAtmSvcOutPdusAlerting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of alerting pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 41 } eqAtmSvcOutPdusPartyAlerting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of party alerting pdu's transmitted on this port." ::= { eqAtmSvcStatsEntry 42 } -- -- ATM Logical Port SAAL Stats Table. -- eqAtmSaalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmSaalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains SAAL stats for an ATM logical port." ::= { eqAtmMib 3 } eqAtmSaalStatsEntry OBJECT-TYPE SYNTAX EqAtmSaalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port SAAL stats entry." INDEX { eqAtmSaalStatsIfIndex } ::= { eqAtmSaalStatsTable 1 } EqAtmSaalStatsEntry ::= SEQUENCE { eqAtmSaalStatsIfIndex INTEGER, eqAtmSaalInErrors Counter32, eqAtmSaalInDiscards Counter32, eqAtmSaalInBeginPdus Counter32, eqAtmSaalInBeginAckPdus Counter32, eqAtmSaalInBeginRejectPdus Counter32, eqAtmSaalInEndPdus Counter32, eqAtmSaalInEndAckPdus Counter32, eqAtmSaalInResyncPdus Counter32, eqAtmSaalInResyncAckPdus Counter32, eqAtmSaalInErrRecoveryPdus Counter32, eqAtmSaalInSeqDataPdus Counter32, eqAtmSaalInPollPdus Counter32, eqAtmSaalInStatusPdus Counter32, eqAtmSaalInUnsolicitedStatusPdus Counter32, eqAtmSaalInUnsolicitedUserPdus Counter32, eqAtmSaalInUnnumberedUserPdus Counter32, eqAtmSaalInUnnumberedMgmtPdus Counter32, eqAtmSaalInSignalOctets Counter32, eqAtmSaalOutDiscards Counter32, eqAtmSaalOutBeginPdus Counter32, eqAtmSaalOutBeginAckPdus Counter32, eqAtmSaalOutBeginRejectPdus Counter32, eqAtmSaalOutEndPdus Counter32, eqAtmSaalOutEndAckPdus Counter32, eqAtmSaalOutResyncPdus Counter32, eqAtmSaalOutResyncAckPdus Counter32, eqAtmSaalOutErrRecoveryPdus Counter32, eqAtmSaalOutSeqDataPdus Counter32, eqAtmSaalOutPollPdus Counter32, eqAtmSaalOutStatusPdus Counter32, eqAtmSaalOutUnsolicitedStatusPdus Counter32, eqAtmSaalOutUnsolicitedUserPdus Counter32, eqAtmSaalOutUnnumberedUserPdus Counter32, eqAtmSaalOutUnnumberedMgmtPdus Counter32, eqAtmSaalOutSignalOctets Counter32, eqAtmSaalOutWindowSize INTEGER } eqAtmSaalStatsIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmSaalStatsEntry 1 } eqAtmSaalInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive errors on this port." ::= { eqAtmSaalStatsEntry 2 } eqAtmSaalInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discards on this port." ::= { eqAtmSaalStatsEntry 3 } eqAtmSaalInBeginPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin pdus received on this port." ::= { eqAtmSaalStatsEntry 4 } eqAtmSaalInBeginAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin ack pdus received on this port." ::= { eqAtmSaalStatsEntry 5 } eqAtmSaalInBeginRejectPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin reject pdus received on this port." ::= { eqAtmSaalStatsEntry 6 } eqAtmSaalInEndPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of end pdus received on this port." ::= { eqAtmSaalStatsEntry 7 } eqAtmSaalInEndAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of end ack pdus received on this port." ::= { eqAtmSaalStatsEntry 8 } eqAtmSaalInResyncPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of resync pdus received on this port." ::= { eqAtmSaalStatsEntry 9 } eqAtmSaalInResyncAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of resync ack pdus received on this port." ::= { eqAtmSaalStatsEntry 10 } eqAtmSaalInErrRecoveryPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of error recovery pdus received on this port." ::= { eqAtmSaalStatsEntry 11 } eqAtmSaalInSeqDataPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sequence data pdus received on this port." ::= { eqAtmSaalStatsEntry 12 } eqAtmSaalInPollPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of poll pdus received on this port." ::= { eqAtmSaalStatsEntry 13 } eqAtmSaalInStatusPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status pdus received on this port." ::= { eqAtmSaalStatsEntry 14 } eqAtmSaalInUnsolicitedStatusPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unsolicited status pdus received on this port." ::= { eqAtmSaalStatsEntry 15 } eqAtmSaalInUnsolicitedUserPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unsolicited user pdus received on this port." ::= { eqAtmSaalStatsEntry 16 } eqAtmSaalInUnnumberedUserPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unnumbered pdus received on this port." ::= { eqAtmSaalStatsEntry 17 } eqAtmSaalInUnnumberedMgmtPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unnumbered mgmt pdus received on this port." ::= { eqAtmSaalStatsEntry 18 } eqAtmSaalInSignalOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of signal octets transmitted on this port." ::= { eqAtmSaalStatsEntry 19 } eqAtmSaalOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 20 } eqAtmSaalOutBeginPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 21 } eqAtmSaalOutBeginAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin ack pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 22 } eqAtmSaalOutBeginRejectPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of begin reject pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 23 } eqAtmSaalOutEndPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of end pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 24 } eqAtmSaalOutEndAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of end ack pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 25 } eqAtmSaalOutResyncPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of resync pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 26 } eqAtmSaalOutResyncAckPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of resync ack pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 27 } eqAtmSaalOutErrRecoveryPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of error recovery pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 28 } eqAtmSaalOutSeqDataPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sequence data pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 29 } eqAtmSaalOutPollPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of poll pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 30 } eqAtmSaalOutStatusPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of status pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 31 } eqAtmSaalOutUnsolicitedStatusPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unsolicited status pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 32 } eqAtmSaalOutUnsolicitedUserPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unsolicited user pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 33 } eqAtmSaalOutUnnumberedUserPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unnumbered pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 34 } eqAtmSaalOutUnnumberedMgmtPdus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unnumbered mgmt pdus transmitted on this port." ::= { eqAtmSaalStatsEntry 35 } eqAtmSaalOutSignalOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of signal octets transmitted on this port." ::= { eqAtmSaalStatsEntry 36 } eqAtmSaalOutWindowSize OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The window size for SAAL on this port." ::= { eqAtmSaalStatsEntry 37 } -- -- ATM Logical Port Stats Table. -- eqAtmVcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmVcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains stats for an ATM logical port." ::= { eqAtmMib 4 } eqAtmVcStatsEntry OBJECT-TYPE SYNTAX EqAtmVcStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port stats entry." INDEX { eqAtmVcStatsIfIndex, eqAtmVcStatsVpi, eqAtmVcStatsVci } ::= { eqAtmVcStatsTable 1 } EqAtmVcStatsEntry ::= SEQUENCE { eqAtmVcStatsIfIndex INTEGER, eqAtmVcStatsVpi INTEGER, eqAtmVcStatsVci INTEGER, eqAtmVcStatsInCells Counter64, eqAtmVcStatsInCellsPerSecond Counter64, eqAtmVcStatsInBitsPerSecond Counter64, eqAtmVcStatsInCellsClp0 Counter64, eqAtmVcStatsInCellsClp1 Counter64, eqAtmVcStatsInCellsTagged Counter64, eqAtmVcStatsInCellsClp0Discards Counter64, eqAtmVcStatsInCellsClp1Discards Counter64, eqAtmVcStatsInCellsOam Counter64, eqAtmVcStatsInCellsClp0Oam Counter64, eqAtmVcStatsInCellsClp1Oam Counter64, eqAtmVcStatsInCellsLoopback Counter64, eqAtmVcStatsInCellsLoopbackOam Counter64, eqAtmVcStatsOutCells Counter64, eqAtmVcStatsOutCellsPerSecond Counter64, eqAtmVcStatsOutBitsPerSecond Counter64, eqAtmVcStatsOutCellsClp0 Counter64, eqAtmVcStatsOutCellsClp1 Counter64, eqAtmVcStatsOutCellsTagged Counter64, eqAtmVcStatsOutCellsClp0Discards Counter64, eqAtmVcStatsOutCellsClp1Discards Counter64, eqAtmVcStatsOutCellsOam Counter64, eqAtmVcStatsOutCellsClp0Oam Counter64, eqAtmVcStatsOutCellsClp1Oam Counter64, eqAtmVcStatsOutCellsLoopback Counter64, eqAtmVcStatsOutCellsLoopbackOam Counter64, eqAtmVcStatsCLR INTEGER } eqAtmVcStatsIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmVcStatsEntry 1 } eqAtmVcStatsVpi OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Path Identifier." ::= { eqAtmVcStatsEntry 2 } eqAtmVcStatsVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Channel Identifier." ::= { eqAtmVcStatsEntry 3 } eqAtmVcStatsInCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells received." ::= { eqAtmVcStatsEntry 4 } eqAtmVcStatsInCellsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells received per second." ::= { eqAtmVcStatsEntry 5 } eqAtmVcStatsInBitsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits received per second." ::= { eqAtmVcStatsEntry 6 } eqAtmVcStatsInCellsClp0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells received." ::= { eqAtmVcStatsEntry 7 } eqAtmVcStatsInCellsClp1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells received." ::= { eqAtmVcStatsEntry 8 } eqAtmVcStatsInCellsTagged OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tagged cells received." ::= { eqAtmVcStatsEntry 9 } eqAtmVcStatsInCellsClp0Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells received and discarded." ::= { eqAtmVcStatsEntry 10 } eqAtmVcStatsInCellsClp1Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells received and discarded." ::= { eqAtmVcStatsEntry 11 } eqAtmVcStatsInCellsOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OAM cells received." ::= { eqAtmVcStatsEntry 12 } eqAtmVcStatsInCellsClp0Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 OAM cells received." ::= { eqAtmVcStatsEntry 13 } eqAtmVcStatsInCellsClp1Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 OAM cells received." ::= { eqAtmVcStatsEntry 14 } eqAtmVcStatsInCellsLoopback OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback cells received." ::= { eqAtmVcStatsEntry 15 } eqAtmVcStatsInCellsLoopbackOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback OAM cells received." ::= { eqAtmVcStatsEntry 16 } eqAtmVcStatsOutCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells transmitted." ::= { eqAtmVcStatsEntry 17 } eqAtmVcStatsOutCellsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells transmitted per second." ::= { eqAtmVcStatsEntry 18 } eqAtmVcStatsOutBitsPerSecond OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits transmitted per second." ::= { eqAtmVcStatsEntry 19 } eqAtmVcStatsOutCellsClp0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells transmitted." ::= { eqAtmVcStatsEntry 20 } eqAtmVcStatsOutCellsClp1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells transmitted." ::= { eqAtmVcStatsEntry 21 } eqAtmVcStatsOutCellsTagged OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of tagged cells transmitted." ::= { eqAtmVcStatsEntry 22 } eqAtmVcStatsOutCellsClp0Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 cells discarded due to lack of resources." ::= { eqAtmVcStatsEntry 23 } eqAtmVcStatsOutCellsClp1Discards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 cells discarded due to lack of resources." ::= { eqAtmVcStatsEntry 24 } eqAtmVcStatsOutCellsOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of OAM cells transmitted." ::= { eqAtmVcStatsEntry 25 } eqAtmVcStatsOutCellsClp0Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-0 OAM cells transmitted." ::= { eqAtmVcStatsEntry 26 } eqAtmVcStatsOutCellsClp1Oam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CLP-1 OAM cells transmitted." ::= { eqAtmVcStatsEntry 27 } eqAtmVcStatsOutCellsLoopback OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback cells transmitted." ::= { eqAtmVcStatsEntry 28 } eqAtmVcStatsOutCellsLoopbackOam OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of loopback OAM cells transmitted." ::= { eqAtmVcStatsEntry 29 } eqAtmVcStatsCLR OBJECT-TYPE SYNTAX INTEGER (0..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The cell loss ratio requirement, expressed as a negative exponent of 10. The default value of 512 indicates any cell loss ratio is acceptable." ::= { eqAtmVcStatsEntry 30 } -- -- ATM OAM Performance Monitoring Table. -- eqAtmOamPmTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmOamPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains OAM Performance Monitoring stats for an ATM OAM PM Session." ::= { eqAtmMib 5 } eqAtmOamPmEntry OBJECT-TYPE SYNTAX EqAtmOamPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port stats entry." INDEX { eqAtmOamPmIfIndex, eqAtmOamPmVpi, eqAtmOamPmVci } ::= { eqAtmOamPmTable 1 } EqAtmOamPmEntry ::= SEQUENCE { eqAtmOamPmIfIndex INTEGER, eqAtmOamPmVpi INTEGER, eqAtmOamPmVci INTEGER, eqAtmOamPmStatus INTEGER, eqAtmOamPmSessionType INTEGER, eqAtmOamPmSinkSource INTEGER, eqAtmOamPmBlockSize INTEGER, eqAtmOamPmEndPt INTEGER, eqAtmOamPmFlow INTEGER, eqAtmOamPmDirection INTEGER, eqAtmOamPmTimeout INTEGER, eqAtmOamPmRetryCount INTEGER, eqAtmOamPmFwdTxUserCellsClp0 Counter32, eqAtmOamPmFwdTxUserCellsClp01 Counter32, eqAtmOamPmFwdTxLostCellsClp0 Counter32, eqAtmOamPmFwdTxLostCellsClp01 Counter32, eqAtmOamPmFwdSECBs Counter32, eqAtmOamPmBwdTxUserCellsClp0 Counter32, eqAtmOamPmBwdTxUserCellsClp01 Counter32, eqAtmOamPmBwdTxLostCellsClp0 Counter32, eqAtmOamPmBwdTxLostCellsClp01 Counter32, eqAtmOamPmBwdSECBs Counter32 } eqAtmOamPmIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmOamPmEntry 1 } eqAtmOamPmVpi OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Path Identifier." ::= { eqAtmOamPmEntry 2 } eqAtmOamPmVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Channel Identifier." ::= { eqAtmOamPmEntry 3 } eqAtmOamPmStatus OBJECT-TYPE SYNTAX INTEGER { activating(1), connected(2), failConnect(3), failNoResource(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the activation process is in the middle of activating, has successfully connected, has failed to connect because the remote end did not respond, or couldn't setup the connection because of lack of local resources." ::= { eqAtmOamPmEntry 4 } eqAtmOamPmSessionType OBJECT-TYPE SYNTAX INTEGER { contCheck(1), perfMonitoring(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the PM session to perform Continuity Check or Performance Monitoring." ::= { eqAtmOamPmEntry 5 } eqAtmOamPmSinkSource OBJECT-TYPE SYNTAX INTEGER { sink(1), source(2), bidirectional(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the PM session to be sink, source, or both." ::= { eqAtmOamPmEntry 6 } eqAtmOamPmBlockSize OBJECT-TYPE SYNTAX INTEGER { bytes128(1), bytes256(2), bytes512(3), bytes1K(4), bytes2K(5), bytes4K(6), bytes8K(7), bytes16K(8), bytes32K(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Block Size of User cells transmitted before an OAM PM cell is transmitted." ::= { eqAtmOamPmEntry 7 } eqAtmOamPmEndPt OBJECT-TYPE SYNTAX INTEGER { segment(1), endToEnd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the PM Session as either a Segment Endpoint or an End-to-End Point" ::= { eqAtmOamPmEntry 8 } eqAtmOamPmFlow OBJECT-TYPE SYNTAX INTEGER { f4(1), f5(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Flow as either an F4 (Virtual Path) or F5 (Virtual Channel) flow." ::= { eqAtmOamPmEntry 9 } eqAtmOamPmDirection OBJECT-TYPE SYNTAX INTEGER { segment(1), endToEnd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the direction as either Forward (Egress, toward the outside netword) or Backward (Ingress, toward the switch fabric)" ::= { eqAtmOamPmEntry 10 } eqAtmOamPmTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Time Period in which to timeout an Activation/DeActivation Cell (in which case another cell may be sent depending on the Retry Count)." ::= { eqAtmOamPmEntry 11 } eqAtmOamPmRetryCount OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times to retry Activation in the event of a failure (no response)." ::= { eqAtmOamPmEntry 12 } eqAtmOamPmFwdTxUserCellsClp0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 cells transmitted." ::= { eqAtmOamPmEntry 13 } eqAtmOamPmFwdTxUserCellsClp01 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 plus Clp1 cells transmitted." ::= { eqAtmOamPmEntry 14 } eqAtmOamPmFwdTxLostCellsClp0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 cells Lost." ::= { eqAtmOamPmEntry 15 } eqAtmOamPmFwdTxLostCellsClp01 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 plus Clp1 cells Lost." ::= { eqAtmOamPmEntry 16 } eqAtmOamPmFwdSECBs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Cell Blocks." ::= { eqAtmOamPmEntry 17 } eqAtmOamPmBwdTxUserCellsClp0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 cells transmitted." ::= { eqAtmOamPmEntry 18 } eqAtmOamPmBwdTxUserCellsClp01 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 plus Clp1 cells transmitted." ::= { eqAtmOamPmEntry 19 } eqAtmOamPmBwdTxLostCellsClp0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 cells Lost." ::= { eqAtmOamPmEntry 20 } eqAtmOamPmBwdTxLostCellsClp01 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Clp0 plus Clp1 cells Lost." ::= { eqAtmOamPmEntry 21 } eqAtmOamPmBwdSECBs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Cell Blocks." ::= { eqAtmOamPmEntry 22 } -- -- ATM OAM Loopback Table. -- eqAtmOamLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF EqAtmOamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains OAM Performance Monitoring stats for an ATM OAM PM Session." ::= { eqAtmMib 6 } eqAtmOamLoopbackEntry OBJECT-TYPE SYNTAX EqAtmOamLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM logical port stats entry." INDEX { eqAtmOamLoopbackIfIndex, eqAtmOamLoopbackVpi, eqAtmOamLoopbackVci } ::= { eqAtmOamLoopbackTable 1 } EqAtmOamLoopbackEntry ::= SEQUENCE { eqAtmOamLoopbackIfIndex INTEGER, eqAtmOamLoopbackVpi INTEGER, eqAtmOamLoopbackVci INTEGER, eqAtmOamLoopbackStatus INTEGER, eqAtmOamLoopbackSendCount INTEGER, eqAtmOamLoopbackSendTrap INTEGER, eqAtmOamLoopbackEndPoint INTEGER, eqAtmOamLoopbackFlow INTEGER, eqAtmOamLoopbackDirection INTEGER, eqAtmOamLoopbackTimeout INTEGER, eqAtmOamLoopbackCellsReceived Counter32, eqAtmOamLoopbackCellsTimedOut Counter32, eqAtmOamLoopbackAveCellTime INTEGER, eqAtmOamLoopbackMinCellTime INTEGER, eqAtmOamLoopbackMaxCellTime INTEGER, eqAtmOamLoopbackTotalCellTime INTEGER } eqAtmOamLoopbackIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the corresponding atm logical port." ::= { eqAtmOamLoopbackEntry 1 } eqAtmOamLoopbackVpi OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Path Identifier." ::= { eqAtmOamLoopbackEntry 2 } eqAtmOamLoopbackVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Channel Identifier." ::= { eqAtmOamLoopbackEntry 3 } eqAtmOamLoopbackStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), completed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Loopback request is being worked on or has completed." ::= { eqAtmOamLoopbackEntry 4 } eqAtmOamLoopbackSendCount OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of Loopback Cells to send." ::= { eqAtmOamLoopbackEntry 5 } eqAtmOamLoopbackSendTrap OBJECT-TYPE SYNTAX INTEGER { send(1), noAction(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not to send an SNMP trap when finished." ::= { eqAtmOamLoopbackEntry 6 } eqAtmOamLoopbackEndPoint OBJECT-TYPE SYNTAX INTEGER { segment(1), endToEnd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Loopback Cell to be sent is a Segment or End-to-End Point type cell." ::= { eqAtmOamLoopbackEntry 7 } eqAtmOamLoopbackFlow OBJECT-TYPE SYNTAX INTEGER { f4(1), f5(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the Flow as either an F4 (Virtual Path) or F5 (Virtual Channel) flow." ::= { eqAtmOamLoopbackEntry 8 } eqAtmOamLoopbackDirection OBJECT-TYPE SYNTAX INTEGER { segment(1), endToEnd(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the direction as either Forward (Egress, toward the outside netword) or Backward (Ingress, toward the switch fabric)" ::= { eqAtmOamLoopbackEntry 9 } eqAtmOamLoopbackTimeout OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Timeout (in seconds) to wait for a Loopback response before sending another (or finishing)." ::= { eqAtmOamLoopbackEntry 10 } eqAtmOamLoopbackCellsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loopback cell responses received succesfully." ::= { eqAtmOamLoopbackEntry 11 } eqAtmOamLoopbackCellsTimedOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loopback cell responses not received succesfully." ::= { eqAtmOamLoopbackEntry 12 } eqAtmOamLoopbackAveCellTime OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Average response time (in milliseconds) for the Loopback Cell." ::= { eqAtmOamLoopbackEntry 13 } eqAtmOamLoopbackMinCellTime OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum response time (in milliseconds) for the Loopback Cell." ::= { eqAtmOamLoopbackEntry 14 } eqAtmOamLoopbackMaxCellTime OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum response time (in milliseconds) for the Loopback Cell." ::= { eqAtmOamLoopbackEntry 15 } eqAtmOamLoopbackTotalCellTime OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Total response time (in milliseconds) for all Loopback Cells of the session." ::= { eqAtmOamLoopbackEntry 16 } END