ENVIROMUX-1W-MIB

All MIBs › ENVIROMUX-1W-MIB

Organization: Network Technologies Inc.

Last Updated: 2020-12-11

Category: Domain: Environmental Monitoring, Vendor: NTI/ENVIROMUX

Description: Network Technologies Inc. E-1W environmental monitoring MIB for single-wire sensor hubs monitoring temperature and digital inputs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENVIROMUX-1W-MIB?

ENVIROMUX-1W-MIB is Network Technologies Inc.'s (NTI) MIB for its E-1W single-wire environmental sensor hub, a compact device that aggregates readings from 1-Wire bus-connected temperature and digital input sensors. It exposes an external sensor inventory and readings table (extSensorTable/extSensorEntry) giving each sensor's type, description, current value, and unit, plus a digital input table (digInputTable/digInputEntry) reporting the state and description of connected dry-contact/digital inputs. Its purpose is entirely hardware/environmental status monitoring: administrators track temperature (and other sensor-type) readings for overheating detection, and digital input states for conditions like an open door, water leak, or other contact-closure alarms wired into the hub. It is a standalone NTI enterprise MIB with no notable external MIB dependency, functioning as a dedicated environmental-monitoring appliance rather than an extension of another device's management data. It is deployed in server rooms, network closets, and remote equipment cabinets, where ENVIROMUX-1W-MIB SNMP monitoring gives operators low-cost temperature and digital-alarm visibility.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENVIROMUX-1W-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NTI (Network Technologies Inc.) E-1W environmental sensor hub

Monitoring Examples

An administrator walks extSensorTable/extSensorEntry by extSensorIndex to read extSensorValue and extSensorUnit for each attached temperature probe, alerting when a reading exceeds a safe threshold in the equipment room. extSensorType and extSensorDescription identify which physical sensor (e.g., "Rack 3 Intake") produced a given reading, aiding fault localization. digInputTable/digInputEntry is polled via digInputIndex to check digInputValue against digInputDescription, catching an open door-contact or water-sensor trip wired into one of the E-1W's digital inputs.

What Can Be Monitored

temperature sensor readings
other 1-Wire sensor readings and units
digital input (dry-contact) state
sensor/input descriptions and inventory

Imported Objects

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
nti	1.3.6.1.4.1.3699
products	1.3.6.1.4.1.3699.1
hardware	1.3.6.1.4.1.3699.1.1
enviromux1W	1.3.6.1.4.1.3699.1.1.12			E-1W MIB file.
masterUnit	1.3.6.1.4.1.3699.1.1.12.1
extSensors	1.3.6.1.4.1.3699.1.1.12.1.2
extSensorTable	1.3.6.1.4.1.3699.1.1.12.1.2.1		not-accessible	Table of external Sensors entries
extSensorEntry	1.3.6.1.4.1.3699.1.1.12.1.2.1.1		not-accessible	An external sensor entry
I32 extSensorIndex	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.1	Integer32	not-accessible	The index of the external sensor entry 1..6
INT extSensorType	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.2	INTEGER	read-only	Sensor Type
STR extSensorDescription	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.3	DisplayString	read-only	Sensor Description
I32 extSensorValue	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.4	Integer32	read-only	The value of the external sensor reading. For temperature, voltage, current or low voltage, it is presented in tenths of degrees/volts
I32 extSensorUnit	1.3.6.1.4.1.3699.1.1.12.1.2.1.1.5	Integer32	read-only	The measuremnet unit for this sensor in numeric format. It is important only for temperature
digInputs	1.3.6.1.4.1.3699.1.1.12.1.3
digInputTable	1.3.6.1.4.1.3699.1.1.12.1.3.1		not-accessible	Table of digital input entries
digInputEntry	1.3.6.1.4.1.3699.1.1.12.1.3.1.1		not-accessible	A digital input entry
I32 digInputIndex	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.1	Integer32	not-accessible	The index of the digital input entry 1..2
STR digInputDescription	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.2	DisplayString	read-only	Sensor Description
INT digInputValue	1.3.6.1.4.1.3699.1.1.12.1.3.1.1.3	INTEGER	read-only	The value of the digital reading
ipDevices	1.3.6.1.4.1.3699.1.1.12.1.4
ipDeviceTable	1.3.6.1.4.1.3699.1.1.12.1.4.1		not-accessible	Table of digital input entries
ipDeviceEntry	1.3.6.1.4.1.3699.1.1.12.1.4.1.1		not-accessible	A digital input entry
I32 ipDeviceIndex	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.1	Integer32	not-accessible	The index of the ip device entry 1..4
STR ipDeviceDescription	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.2	DisplayString	read-only	Sensor Description
INT ipDeviceValue	1.3.6.1.4.1.3699.1.1.12.1.4.1.1.3	INTEGER	read-only	The result of the ip device ping test
eAlerts	1.3.6.1.4.1.3699.1.1.12.1.5
alertTable	1.3.6.1.4.1.3699.1.1.12.1.5.1		not-accessible	Table of alert entries
alertEntry	1.3.6.1.4.1.3699.1.1.12.1.5.1.1		not-accessible	An alert entry
I32 alertIndex	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.1	Integer32	not-accessible	The index of the alert entry 1..32
INT alertEnabled	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.2	INTEGER	read-only	Shows if alert is enabled 0..1
STR alertSensor	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.3	DisplayString	read-only	Alert Sensor Description
I32 alertSensorValue	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.4	Integer32	read-only	The value of the sensor for analog sensors or open/closed for digital inputs
I32 alertThreshold	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.5	Integer32	read-only	The value of the alert threshold for analog sensors, irrelevant for alerts for digital inputs
INT alertThresholdType	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.6	INTEGER	read-only	The type of the alert threshold for analog sensors, irrelevant for alerts for digital inputs
INT alertStatus	1.3.6.1.4.1.3699.1.1.12.1.5.1.1.7	INTEGER	read-only	The current status of the alert
smAlerts	1.3.6.1.4.1.3699.1.1.12.1.6
smAlertTable	1.3.6.1.4.1.3699.1.1.12.1.6.1		not-accessible	Table of alert entries
smAlertEntry	1.3.6.1.4.1.3699.1.1.12.1.6.1.1		not-accessible	A smart alert entry
I32 smAlertIndex	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.1	Integer32	not-accessible	The index of the alert entry (only one)
INT smAlertEnabled	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.2	INTEGER	read-only	Shows if alert is enabled 0..1
INT smAlertStatus	1.3.6.1.4.1.3699.1.1.12.1.6.1.1.3	INTEGER	read-only	The current status of the alert
enviromux1WTraps	1.3.6.1.4.1.3699.1.1.12.100
extSensorsTraps	1.3.6.1.4.1.3699.1.1.12.100.2
NTF extSensor1Trap	1.3.6.1.4.1.3699.1.1.12.100.2.1			Trap issued when external sensor 1 has a notification to send
NTF extSensor2Trap	1.3.6.1.4.1.3699.1.1.12.100.2.2			Trap issued when external sensor 2 has a notification to send
NTF extSensor3Trap	1.3.6.1.4.1.3699.1.1.12.100.2.3			Trap issued when external sensor 3 has a notification to send
NTF extSensor4Trap	1.3.6.1.4.1.3699.1.1.12.100.2.4			Trap issued when external sensor 4 has a notification to send
NTF extSensor5Trap	1.3.6.1.4.1.3699.1.1.12.100.2.5			Trap issued when external sensor 5 has a notification to send
NTF extSensor6Trap	1.3.6.1.4.1.3699.1.1.12.100.2.6			Trap issued when external sensor 6 has a notification to send
NTF extSensor7Trap	1.3.6.1.4.1.3699.1.1.12.100.2.7			Trap issued when external sensor 6 has a notification to send
NTF extSensor8Trap	1.3.6.1.4.1.3699.1.1.12.100.2.8			Trap issued when external sensor 6 has a notification to send
NTF extSensor9Trap	1.3.6.1.4.1.3699.1.1.12.100.2.9			Trap issued when external sensor 6 has a notification to send
NTF extSensor10Trap	1.3.6.1.4.1.3699.1.1.12.100.2.10			Trap issued when external sensor 6 has a notification to send
NTF extSensor11Trap	1.3.6.1.4.1.3699.1.1.12.100.2.11			Trap issued when external sensor 6 has a notification to send
NTF extSensor12Trap	1.3.6.1.4.1.3699.1.1.12.100.2.12			Trap issued when external sensor 6 has a notification to send
NTF extSensor13Trap	1.3.6.1.4.1.3699.1.1.12.100.2.13			Trap issued when external sensor 6 has a notification to send
NTF extSensor14Trap	1.3.6.1.4.1.3699.1.1.12.100.2.14			Trap issued when external sensor 6 has a notification to send
NTF extSensor15Trap	1.3.6.1.4.1.3699.1.1.12.100.2.15			Trap issued when external sensor 6 has a notification to send
NTF extSensor16Trap	1.3.6.1.4.1.3699.1.1.12.100.2.16			Trap issued when external sensor 6 has a notification to send
NTF extSensor17Trap	1.3.6.1.4.1.3699.1.1.12.100.2.17			Trap issued when external sensor 6 has a notification to send
NTF extSensor18Trap	1.3.6.1.4.1.3699.1.1.12.100.2.18			Trap issued when external sensor 6 has a notification to send
NTF extSensor19Trap	1.3.6.1.4.1.3699.1.1.12.100.2.19			Trap issued when external sensor 6 has a notification to send
NTF extSensor20Trap	1.3.6.1.4.1.3699.1.1.12.100.2.20			Trap issued when external sensor 6 has a notification to send
NTF extSensor21Trap	1.3.6.1.4.1.3699.1.1.12.100.2.21			Trap issued when external sensor 6 has a notification to send
NTF extSensor22Trap	1.3.6.1.4.1.3699.1.1.12.100.2.22			Trap issued when external sensor 6 has a notification to send
NTF extSensor23Trap	1.3.6.1.4.1.3699.1.1.12.100.2.23			Trap issued when external sensor 6 has a notification to send
NTF extSensor24Trap	1.3.6.1.4.1.3699.1.1.12.100.2.24			Trap issued when external sensor 6 has a notification to send
digitalInputsTraps	1.3.6.1.4.1.3699.1.1.12.100.3
NTF digInput1Trap	1.3.6.1.4.1.3699.1.1.12.100.3.1			Trap issued when digital input 1 has a notification to send
NTF digInput2Trap	1.3.6.1.4.1.3699.1.1.12.100.3.2			Trap issued when digital input 2 has a notification to send
ipDevicesTraps	1.3.6.1.4.1.3699.1.1.12.100.4
NTF ipDevice1Trap	1.3.6.1.4.1.3699.1.1.12.100.4.1			Trap issued when IP device 1 has a notification to send
NTF ipDevice2Trap	1.3.6.1.4.1.3699.1.1.12.100.4.2			Trap issued when IP device 2 has a notification to send
NTF ipDevice3Trap	1.3.6.1.4.1.3699.1.1.12.100.4.3			Trap issued when IP device 3 has a notification to send
NTF ipDevice4Trap	1.3.6.1.4.1.3699.1.1.12.100.4.4			Trap issued when IP device 4 has a notification to send
otherProduct	1.3.6.1.4.1.3699.1.1.200
software	1.3.6.1.4.1.3699.1.2

RFC description

Monitors environmental conditions including temperature sensors, digital inputs, and external probes on Enviromux devices.

Start monitoring NTI environmental sensor hubs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENVIROMUX-1W-MIB

What Is ENVIROMUX-1W-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description