All MIBs › ENTERASYS-PWA-MIB › etsysPwaSystemEnhancedModeRefreshTime
etsysPwaSystemEnhancedModeRefreshTime
Module: ENTERASYS-PWA-MIB
OID (symbolic): ENTERASYS-PWA-MIB::etsysPwaSystemEnhancedModeRefreshTime
OID (numeric): 1.3.6.1.4.1.5624.1.2.8.1.17
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the value that is displayed on the PWA login success page as the redirect time.
If a user, using PWA enhanced mode, enters a URL of 'http://enterasys.com' prior to being presented with the PWA login page and then successfully authenticates into the network they would be presented with a login success page that displays 'Welcome to the Network. Completing network connections. You will be redirected to http://enterasys.com in approximately 30 seconds'.
An end-station that is utilizing the Dynamic Host Configuration Protocol (DHCP) as a means of obtaining an IP address will take some time to transition from the temporary IP address issued by PWA, as part of the authentication process, to the official IP address issued by the network.
etsysPwaSystemEnhancedModeRefreshTime provides a configurable time period for the end-stations on a given switch to complete the process of obtaining their official IP addresses and to begin using them. The default value of 30 seconds has been shown to be adequate in most environments. In some networks this time period may need to be longer, and in other networks it could be shorter.
In networks that only use static IP addresses a time period on the order of 5 to 10 seconds may be sufficient. A period of less than 5 seconds is not recommended as there is a slight delay after a successful login before the switch transitions the port to forwarding.
What is etsysPwaSystemEnhancedModeRefreshTime?
Number of seconds (0-120, default 30) shown on the PWA login-success page as the countdown before the browser redirects, giving the end-station time to pick up its real DHCP address after authenticating; shorten it for static-IP networks, lengthen it if DHCP transitions are slow.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.8.1.17 snmpwalk -v2c -c public <target> ENTERASYS-PWA-MIB::etsysPwaSystemEnhancedModeRefreshTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.8.1.17.1 snmpget -v2c -c public <target> ENTERASYS-PWA-MIB::etsysPwaSystemEnhancedModeRefreshTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.8.1.17.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Port Web Authentication captive portal) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-PWA-MIB::etsysPwaSystemEnhancedModeRefreshTime OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Port Web Authentication captive portal) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.8 | etsysPwaMIB | ENTERASYS-PWA-MIB |
| 1.3.6.1.4.1.5624.1.2.8.1 | etsysPwaSystem | ENTERASYS-PWA-MIB |
| 1.3.6.1.4.1.5624.1.2.8.1.17 | etsysPwaSystemEnhancedModeRefreshTime | ENTERASYS-PWA-MIB |