ENTERASYS-PIM-EXT-MIB :: etsysPimExtTibMgrKeepalivePeriod

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsENTERASYS-PIM-EXT-MIBetsysPimExtTibMgrKeepalivePeriod

etsysPimExtTibMgrKeepalivePeriod

Module: ENTERASYS-PIM-EXT-MIB

OID (symbolic): ENTERASYS-PIM-EXT-MIB::etsysPimExtTibMgrKeepalivePeriod

OID (numeric): 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The amount of time to keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets.

This object corresponds to the 'Keepalive_Period' defined in PIM-SM [RFC 4601].

Note: Configuring different values for this object for different routers in the PIM domain may lead to incorrect protocol operation.

What is etsysPimExtTibMgrKeepalivePeriod?

How long, in seconds (default 210), (S,G) multicast forwarding state is kept alive in the absence of PIM Join messages, local group membership, or actual data packets for that source and group, matching RFC 4601's Keepalive_Period; mismatched values across the PIM domain can cause inconsistent state timeout behavior.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16
snmpwalk -v2c -c public <target> ENTERASYS-PIM-EXT-MIB::etsysPimExtTibMgrKeepalivePeriod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16.1
snmpget -v2c -c public <target> ENTERASYS-PIM-EXT-MIB::etsysPimExtTibMgrKeepalivePeriod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16.1 i <value>

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (PIM multicast routing extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-PIM-EXT-MIB::etsysPimExtTibMgrKeepalivePeriod OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (PIM multicast routing extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.67etsysPimExtMIBENTERASYS-PIM-EXT-MIB
1.3.6.1.4.1.5624.1.2.67.1etsysPimExtObjectsENTERASYS-PIM-EXT-MIB
1.3.6.1.4.1.5624.1.2.67.1.2etsysPimExtTablesENTERASYS-PIM-EXT-MIB
1.3.6.1.4.1.5624.1.2.67.1.2.8etsysPimExtTibMgrTableENTERASYS-PIM-EXT-MIB
1.3.6.1.4.1.5624.1.2.67.1.2.8.1etsysPimExtTibMgrEntryENTERASYS-PIM-EXT-MIB
1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16etsysPimExtTibMgrKeepalivePeriodENTERASYS-PIM-EXT-MIB