GSM7324-QOS-ACL-MIB

All MIBs › GSM7324-QOS-ACL-MIB

Organization: Netgear

Last Updated: 2003-05-06

Category: Technology: QoS, Vendor: Netgear

Description: Netgear GSM7324 switch MIB for ACL-based traffic filtering in quality of service policy applications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GSM7324-QOS-ACL-MIB?

GSM7324-QOS-ACL-MIB is a Netgear enterprise MIB for the GSM7324 managed Layer 2/3 switch, providing SNMP management of Access Control Lists used to implement quality-of-service traffic filtering and classification policies. Although no module description or sample objects were available in this batch, based on its name and short description it would expose ACL rule definitions and their association with QoS actions (e.g. rate limiting, priority marking, or drop/permit) applied to switch ports or VLANs. Its monitoring value would primarily be configuration/software-status oriented - confirming which ACL-based QoS policies are active on which interfaces - rather than hardware health telemetry. As a QoS/ACL module it likely depends on or complements the switch's other Netgear enterprise MIBs covering interfaces, VLANs, and general QoS. It is typically deployed on Netgear GSM7324 switches in SMB/enterprise LAN environments where administrators use ACL-based QoS to prioritize or restrict specific traffic types. Engineers can download the GSM7324-QOS-ACL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GSM7324-QOS-ACL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear GSM7324 managed switch

Monitoring Examples

No sample object names or module description were provided for this MIB in this batch, so a concrete OID-level monitoring example cannot be given honestly. In general, an administrator managing a GSM7324 would be expected to poll ACL/QoS policy tables to confirm which access-list-based classification rules are bound to which switch ports, but the actual object names are not available here to reference concretely.

Imported Objects

From GSM7324-QOS-MIB

gsm7324QOS

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
gsm7324QOSACL	1.3.6.1.4.1.4526.1.7.3.2
aclTable	1.3.6.1.4.1.4526.1.7.3.2.1		not-accessible	A table of ACL instances.
aclEntry	1.3.6.1.4.1.4526.1.7.3.2.1.1		not-accessible
I32 aclIndex	1.3.6.1.4.1.4526.1.7.3.2.1.1.1	Integer32	not-accessible	The ACL index this instance is associated with.
ROW aclStatus	1.3.6.1.4.1.4526.1.7.3.2.1.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
aclIfTable	1.3.6.1.4.1.4526.1.7.3.2.2		not-accessible	A table of ACL interface instances.
aclIfEntry	1.3.6.1.4.1.4526.1.7.3.2.2.1		not-accessible
I32 aclIfIndex	1.3.6.1.4.1.4526.1.7.3.2.2.1.1	Integer32	not-accessible	The interface this ACL instance is associated with.
INT aclIfDirection	1.3.6.1.4.1.4526.1.7.3.2.2.1.2	INTEGER	not-accessible	The direction this ACL instance applies.
ROW aclIfStatus	1.3.6.1.4.1.4526.1.7.3.2.2.1.3	RowStatus	read-create	Status of this instance. active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
aclRuleTable	1.3.6.1.4.1.4526.1.7.3.2.3		not-accessible	A table of ACL Rules instances.
aclRuleEntry	1.3.6.1.4.1.4526.1.7.3.2.3.1		not-accessible	A table of ACL Classification Rules
I32 aclRuleIndex	1.3.6.1.4.1.4526.1.7.3.2.3.1.1	Integer32	not-accessible	The index of this instance.
INT aclRuleAction	1.3.6.1.4.1.4526.1.7.3.2.3.1.2	INTEGER	read-create	The type of action this rule should perform.
I32 aclRuleProtocol	1.3.6.1.4.1.4526.1.7.3.2.3.1.3	Integer32	read-create	icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
IP aclRuleSrcIpAddress	1.3.6.1.4.1.4526.1.7.3.2.3.1.4	IpAddress	read-create	The Source IP Address used in the ACL Classification.
IP aclRuleSrcIpMask	1.3.6.1.4.1.4526.1.7.3.2.3.1.5	IpAddress	read-create	The Source IP Mask used in the ACL Classification.
I32 aclRuleSrcL4Port	1.3.6.1.4.1.4526.1.7.3.2.3.1.6	Integer32	read-create	The Source Port Number (Layer 4) used in the ACL Classification.
I32 aclRuleSrcL4PortRangeStart	1.3.6.1.4.1.4526.1.7.3.2.3.1.7	Integer32	read-create	The Source Port Number(Layer 4) range start.
I32 aclRuleSrcL4PortRangeEnd	1.3.6.1.4.1.4526.1.7.3.2.3.1.8	Integer32	read-create	The Source Port Number(Layer 4) range end.
IP aclRuleDestIpAddress	1.3.6.1.4.1.4526.1.7.3.2.3.1.9	IpAddress	read-create	The Destination IP Address used in the ACL Classification.
IP aclRuleDestIpMask	1.3.6.1.4.1.4526.1.7.3.2.3.1.10	IpAddress	read-create	The Destination IP Mask used in the ACL Classification.
I32 aclRuleDestL4Port	1.3.6.1.4.1.4526.1.7.3.2.3.1.11	Integer32	read-create	The Destination Port (Layer 4) used in ACl classification.
I32 aclRuleDestL4PortRangeStart	1.3.6.1.4.1.4526.1.7.3.2.3.1.12	Integer32	read-create	The Destination Port (Layer 4) starting range used in ACL classification.
I32 aclRuleDestL4PortRangeEnd	1.3.6.1.4.1.4526.1.7.3.2.3.1.13	Integer32	read-create	The Destination Port (Layer 4) ending range used in ACL classification.
I32 aclRuleIPDSCP	1.3.6.1.4.1.4526.1.7.3.2.3.1.14	Integer32	read-create	The Differentiated Services Code Point value.
I32 aclRuleIpPrecedence	1.3.6.1.4.1.4526.1.7.3.2.3.1.15	Integer32	read-create	The Type of Service (TOS) IP Precedence value.
I32 aclRuleIpTosBits	1.3.6.1.4.1.4526.1.7.3.2.3.1.16	Integer32	read-create	The Type of Service (TOS) Bits value.
I32 aclRuleIpTosMask	1.3.6.1.4.1.4526.1.7.3.2.3.1.17	Integer32	read-create	The Type of Service (TOS) Mask value.
ROW aclRuleStatus	1.3.6.1.4.1.4526.1.7.3.2.3.1.18	RowStatus	read-create	Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance

RFC description

Manages QoS Access Control Lists (ACLs) for the Netgear GSM7324 switch.

Start monitoring Netgear GSM7324 managed switch (ACL-based QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GSM7324-QOS-ACL-MIB

What Is GSM7324-QOS-ACL-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description