All MIBs › ELT-MES-DEV-PARAMS
Organization: Eltex Enterprise Co, Ltd.
Last Updated: 2015--0-9-
Category: Vendor: Eltex
Description: Eltex MES device parameters MIB providing hardware-specific configuration and operational parameters for Eltex MES switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ELT-MES-DEV-PARAMS?
ELT-MES-DEV-PARAMS is Eltex Enterprise's private MIB providing hardware-specific device parameters for Eltex MES-series managed Ethernet switches, covering firmware image inventory and boot-related configuration. It exposes a firmware image table tracking installed image versions/commit hashes and a boot password configuration object. It supports monitoring software status directly: eltImage1CommitHash and eltImage2CommitHash let an admin confirm exactly which firmware build (by commit hash) is active in each of the switch's dual firmware image slots, useful for verifying successful firmware upgrades or detecting version drift across a fleet, while the eltMesBootPassword setting relates to boot-time device security. It is part of Eltex's own proprietary MES enterprise MIB tree, independent of standard IETF MIBs, though it may be polled alongside standard system MIBs (e.g., SNMPv2-MIB sysDescr) for full device inventory. It is typically deployed on Eltex MES switches in carrier or enterprise access networks where administrators track firmware versions and boot security settings. Network engineers evaluating or troubleshooting this functionality can download the ELT-MES-DEV-PARAMS file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ELT-MES-DEV-PARAMS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Eltex MES-series managed Ethernet switches
Monitoring Examples
eltImageInfoTable/eltImageInfoEntry with eltImage1CommitHash and eltImage2CommitHash let an admin verify which exact firmware build is loaded in each of the switch's two image banks, catching a failed or partial firmware upgrade if the commit hash doesn't match the expected release. eltMesBootPassword lets an operator confirm boot-time password protection is configured as expected across a fleet of MES switches. Together these objects support firmware version auditing and boot security compliance checks during device provisioning or upgrade cycles.
What Can Be Monitored
- firmware image commit hash (per image slot)
- boot password configuration
Imported Objects
From ELTEX-MES
| eltMes | MODULE-IDENTITY |
| rndImageInfoEntry | OBJECT-TYPE |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString |
OIDs
RFC description
Defines device parameters MIB for Eltex MES switches, including boot configuration and image information management.
Start monitoring Eltex MES-series managed Ethernet switch (firmware image/boot config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.