EDGE-MIB

All MIBs › EDGE-MIB

Category: Device Management

Description: Edge device management MIB providing objects for monitoring and configuring network edge equipment interfaces and services.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EDGE-MIB?

This enterprise MIB provides operating-system-level performance and resource monitoring for an "edge" server/appliance platform, modeled closely on Windows-style performance counters. It exposes a server statistics table covering processor load, interrupt rate, disk usage percentage and free space, disk I/O time breakdowns, memory utilization, and page-fault rate for each monitored server instance. This is squarely hardware/software status monitoring data: it lets an operator track CPU load, memory pressure, disk space exhaustion, and disk I/O bottlenecks on the edge device, which are classic early-warning indicators of performance degradation or impending failure. It appears to parallel the structure of the Host Resources MIB or Windows perfmon counters translated into SNMP, though implemented as a private vendor extension rather than importing those standards directly. It is typically deployed on edge/network-attached-storage appliances or gateway servers where administrators need SNMP-based OS resource monitoring, making the EDGE-MIB MIB a practical stand-in for OS-level performance counters on these appliances.

IPNetwork Monitor allows you to monitor SNMP objects defined in EDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

edge server/NAS appliance

Monitoring Examples

Polling edgeServerStatTable/edgeServerStatEntry by edgeSsIndex, an admin can track edgeSsProcessorTime and edgeSsMemoryPercentUsed to spot CPU or memory exhaustion on the edge server. Checking edgeSsDiskPercentUsed and edgeSsFreeMegabytes reveals impending disk-space exhaustion, while a spike in edgeSsPageFaultsPerSec or edgeSsPercentDiskTime can indicate memory thrashing or a disk I/O bottleneck degrading performance.

What Can Be Monitored

processor utilization
interrupt rate
disk percent used
free disk space
disk read/write time percentage
memory percent used
page faults per second

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
experimental

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
edge	1.3.6.1.4.1.429.1.24
INT edgeCfgDbgCallControl	1.3.6.1.4.1.429.1.24.2.1.1.7	INTEGER	read-write	This object configures the Debug Level for Call Control Debug Systems.
INT edgeCfgDbgCompression	1.3.6.1.4.1.429.1.24.2.1.1.9	INTEGER	read-write	This object configures the Debug Level for Compression Debug Systems.
INT edgeCfgDbgDataTransfer	1.3.6.1.4.1.429.1.24.2.1.1.8	INTEGER	read-write	This object configures the Debug Level for Data Transfer Debug Systems.
INT edgeCfgDbgFrameService	1.3.6.1.4.1.429.1.24.2.1.1.5	INTEGER	read-write	This object configures the Debug Level for Frame Service Debug Systems.
INT edgeCfgDbgIndex	1.3.6.1.4.1.429.1.24.2.1.1.1	INTEGER	read-only	A unique index identifying the Gateway Card to which the Debug Level parameters table objects pertain
INT edgeCfgDbgIp	1.3.6.1.4.1.429.1.24.2.1.1.2	INTEGER	read-write	This object configures the Debug Level for Ip Debug Systems.
INT edgeCfgDbgPacketBus	1.3.6.1.4.1.429.1.24.2.1.1.6	INTEGER	read-write	This object configures the Debug Level for Packet Bus Debug Systems.
INT edgeCfgDbgPPP	1.3.6.1.4.1.429.1.24.2.1.1.3	INTEGER	read-write	This object configures the Debug Level for PPP Debug Systems.
INT edgeCfgDbgTDM	1.3.6.1.4.1.429.1.24.2.1.1.4	INTEGER	read-write	This object configures the Debug Level for TDM Debug Systems.
edgeCfgDebugLevel	1.3.6.1.4.1.429.1.24.2
edgeCfgDebugLevelEntry	1.3.6.1.4.1.429.1.24.2.1.1		not-accessible	There is one Configuration row for each Gateway Card in the NAS chassis.
edgeCfgDebugLevelTable	1.3.6.1.4.1.429.1.24.2.1		not-accessible	Table containing objects for configuring Debug Levels for EdgeServer Gateway Cards in the chassis.
edgeCmd	1.3.6.1.4.1.429.1.24.6
INT edgeCmdCode	1.3.6.1.4.1.429.1.24.6.1.1.8	INTEGER	read-only	The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed can be found in the status table.
edgeCmdEntry	1.3.6.1.4.1.429.1.24.6.1.1		not-accessible	There is one IP Gateway Card Command entry per IP Gateway Card in the chassis.
INT edgeCmdForce	1.3.6.1.4.1.429.1.24.6.1.1.5	INTEGER	read-write	In some cases, the IP Gateway Card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
INT edgeCmdFunction	1.3.6.1.4.1.429.1.24.6.1.1.4	INTEGER	read-write	This object contains a value which describes the command which is being invoked.
INT edgeCmdIndex	1.3.6.1.4.1.429.1.24.6.1.1.1	INTEGER	read-only	A unique value for each IP Gateway Card in the chassis. The value of this object matches the value of the index of the correspond1ing IP Gateway Card's entry in the entity table of the chassis MIB.
OCT edgeCmdMgtStationId	1.3.6.1.4.1.429.1.24.6.1.1.2	OCTET STRING	read-write	This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with ipgwCmdReqId and ipgwCmdResult to detect interference from other MSs.
OCT edgeCmdParam	1.3.6.1.4.1.429.1.24.6.1.1.6	OCTET STRING	read-write	This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required.
INT edgeCmdReqId	1.3.6.1.4.1.429.1.24.6.1.1.3	INTEGER	read-only	This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this IP Gateway Card. If the request-id is unknown or undefined, this object contains the value zero.
INT edgeCmdResult	1.3.6.1.4.1.429.1.24.6.1.1.7	INTEGER	read-only	This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset.
edgeCmdTable	1.3.6.1.4.1.429.1.24.6.1		not-accessible	The IP Card Command table contains an entry for each of the manageable IP Gateway Card in the chassis. It provides a means through which to take specific actions on one or more IP Gateway cards in the NAS chassis.
edgeCpuUtlTrap	1.3.6.1.4.1.429.1.24.4
edgeCpuUtlTrapEntry	1.3.6.1.4.1.429.1.24.4.1.1		not-accessible	There is one Operational row for each Gateway Card in the NAS chassis.
edgeCpuUtlTrapTable	1.3.6.1.4.1.429.1.24.4.1		not-accessible	Table containing objects for CPU Utilization Trap for EdgeServer Gateway Cards in the chassis.
INT edgeCpuUtlTrClearStatus	1.3.6.1.4.1.429.1.24.4.1.1.4	INTEGER	read-write	This object is to see the current operation the CPU Utilization status Clear trap enable/disable.
INT edgeCpuUtlTrClearThreshCnt	1.3.6.1.4.1.429.1.24.4.1.1.7	INTEGER	read-write	This object is the CPU Utilization Clear Trap Threshold Count.
INT edgeCpuUtlTrClearThreshTimer	1.3.6.1.4.1.429.1.24.4.1.1.10	INTEGER	read-write	This object is the CPU Utilization Clear Trap Threshold Time.
INT edgeCpuUtlTrIndex	1.3.6.1.4.1.429.1.24.4.1.1.1	INTEGER	read-only	A unique index identifying the Gateway Card to which the CPU Utilization Trap objects pertain
INT edgeCpuUtlTrMrgOperStatus	1.3.6.1.4.1.429.1.24.4.1.1.2	INTEGER	read-write	This object is see the current operation of the CPU Utilization status Marginally operational trap enable/disable.
INT edgeCpuUtlTrMrgOperThreshCnt	1.3.6.1.4.1.429.1.24.4.1.1.5	INTEGER	read-write	This object is the CPU Utilization Marginally Operational Trap Threshold Count.
INT edgeCpuUtlTrMrgOperThreshTimer	1.3.6.1.4.1.429.1.24.4.1.1.8	INTEGER	read-write	This object is the CPU Utilization Marginally Operational Trap Threshold Time.
INT edgeCpuUtlTrNonOperStatus	1.3.6.1.4.1.429.1.24.4.1.1.3	INTEGER	read-write	This object is to see the curent operation of the CPU Utilization status Non operational trap enable/disable.
INT edgeCpuUtlTrNonOperThreshCnt	1.3.6.1.4.1.429.1.24.4.1.1.6	INTEGER	read-write	This object is the CPU Utilization Non Operational Trap Threshold Count.
INT edgeCpuUtlTrNonOperThreshTimer	1.3.6.1.4.1.429.1.24.4.1.1.9	INTEGER	read-write	This object is the CPU Utilization Non Operational Trap Threshold Time.
INT edgeCpuUtlTrStatus	1.3.6.1.4.1.429.1.24.4.1.1.11	INTEGER	read-only	This object is the CPU Utilization trap status.
edgeDskUtlTrap	1.3.6.1.4.1.429.1.24.5
edgeDskUtlTrapEntry	1.3.6.1.4.1.429.1.24.5.1.1		not-accessible	There is one Operational row for each Gateway Card in the NAS chassis.
edgeDskUtlTrapTable	1.3.6.1.4.1.429.1.24.5.1		not-accessible	Table containing objects for DISK Utilization Trap for EdgeServer Gateway Cards in the chassis.
INT edgeDskUtlTrClearStatus	1.3.6.1.4.1.429.1.24.5.1.1.4	INTEGER	read-write	This object is to see the current operational setting of the DISK Utilization status Clear trap enable/disable.
INT edgeDskUtlTrClearThreshCnt	1.3.6.1.4.1.429.1.24.5.1.1.7	INTEGER	read-write	This object is the DISK Utilization Clear Trap Threshold Count.
INT edgeDskUtlTrClearThreshTimer	1.3.6.1.4.1.429.1.24.5.1.1.10	INTEGER	read-write	This object is the DISK Utilization Clear Trap Threshold Time.
INT edgeDskUtlTrIndex	1.3.6.1.4.1.429.1.24.5.1.1.1	INTEGER	read-only	A unique index identifying the Gateway Card to which the DISK Utilization Trap objects pertain
INT edgeDskUtlTrMrgOperStatus	1.3.6.1.4.1.429.1.24.5.1.1.2	INTEGER	read-write	This object is see the current setting of the DISK Utilization status Marginally operational trap enable/disable.
INT edgeDskUtlTrMrgOperThreshCnt	1.3.6.1.4.1.429.1.24.5.1.1.5	INTEGER	read-write	This object is the DISK Utilization Marginally Operational Trap Threshold Count.
INT edgeDskUtlTrMrgOperThreshTimer	1.3.6.1.4.1.429.1.24.5.1.1.8	INTEGER	read-write	This object is the DISK Utilization Marginally Operational Trap Threshold Time.
INT edgeDskUtlTrNonOperStatus	1.3.6.1.4.1.429.1.24.5.1.1.3	INTEGER	read-write	This object is to see the current setting of the DISK Utilization status Non operational trap enable/disable.
INT edgeDskUtlTrNonOperThreshCnt	1.3.6.1.4.1.429.1.24.5.1.1.6	INTEGER	read-write	This object is the DISK Utilization Non Operational Trap Threshold Count.
INT edgeDskUtlTrNonOperThreshTimer	1.3.6.1.4.1.429.1.24.5.1.1.9	INTEGER	read-write	This object is the DISK Utilization Non Operational Trap Threshold Time.
INT edgeDskUtlTrStatus	1.3.6.1.4.1.429.1.24.5.1.1.11	INTEGER	read-only	This object is the DISK Utilization trap status.
edgeMemUtlTrap	1.3.6.1.4.1.429.1.24.3
edgeMemUtlTrapEntry	1.3.6.1.4.1.429.1.24.3.1.1		not-accessible	There is one Operational row for each Gateway Card in the NAS chassis.
edgeMemUtlTrapTable	1.3.6.1.4.1.429.1.24.3.1		not-accessible	Table containing objects for Memory Utilization Trap for EdgeServer Gateway Cards in the chassis.
INT edgeMemUtlTrClearStatus	1.3.6.1.4.1.429.1.24.3.1.1.4	INTEGER	read-write	This object is the operatinal Memory Utilization status Clear trap enable/disable.
INT edgeMemUtlTrClearThreshCnt	1.3.6.1.4.1.429.1.24.3.1.1.7	INTEGER	read-write	This object is the Memory Utilization Clear Trap Threshold Count.
INT edgeMemUtlTrClearThreshTimer	1.3.6.1.4.1.429.1.24.3.1.1.10	INTEGER	read-write	This object is the Memory Utilization Clear Trap Threshold Time.
INT edgeMemUtlTrIndex	1.3.6.1.4.1.429.1.24.3.1.1.1	INTEGER	read-only	A unique index identifying the Gateway Card to which the Memory Utilization Trap objects pertain
INT edgeMemUtlTrMrgOperStatus	1.3.6.1.4.1.429.1.24.3.1.1.2	INTEGER	read-write	This object is the operational Memory Utilization status Marginally operational trap enable/disable.
INT edgeMemUtlTrMrgOperThreshCnt	1.3.6.1.4.1.429.1.24.3.1.1.5	INTEGER	read-write	This object is the Memory Utilization Marginally Operational Trap Threshold Count.
INT edgeMemUtlTrMrgOperThreshTimer	1.3.6.1.4.1.429.1.24.3.1.1.8	INTEGER	read-write	This object is the Memory Utilization Marginally Operational Trap Threshold Time.
INT edgeMemUtlTrNonOperStatus	1.3.6.1.4.1.429.1.24.3.1.1.3	INTEGER	read-write	This object is the operational Memory Utilization status Non operational trap enable/disable.
INT edgeMemUtlTrNonOperThreshCnt	1.3.6.1.4.1.429.1.24.3.1.1.6	INTEGER	read-write	This object is the Memory Utilization Non Operational Trap Threshold Count.
INT edgeMemUtlTrNonOperThreshTimer	1.3.6.1.4.1.429.1.24.3.1.1.9	INTEGER	read-write	This object is the Memory Utilization Non Operational Trap Threshold Time.
INT edgeMemUtlTrStatus	1.3.6.1.4.1.429.1.24.3.1.1.11	INTEGER	read-only	This object is the Status of the Memory utilization trap.
edgeServerStat	1.3.6.1.4.1.429.1.24.1
edgeServerStatEntry	1.3.6.1.4.1.429.1.24.1.1.1		not-accessible	There is one Configuration row for each Gateway Card in the NAS chassis.
edgeServerStatTable	1.3.6.1.4.1.429.1.24.1.1		not-accessible	Table containing objects for statistics for the EdgeServer Gateway Cards in the chassis.
STR edgeSsComputerName	1.3.6.1.4.1.429.1.24.1.1.1.16	DisplayString	read-write	This object is the Windows NT Computer Name
STR edgeSsCurrentSwLoadRevision	1.3.6.1.4.1.429.1.24.1.1.1.13	DisplayString	read-only	This object is the current revision of the Software load.
INT edgeSsDiskPercentUsed	1.3.6.1.4.1.429.1.24.1.1.1.4	INTEGER	read-only	This object is the Percent of the Disk used Space.
STR edgeSsedgeTechnology	1.3.6.1.4.1.429.1.24.1.1.1.12	DisplayString	read-only	This object is the edge Technology used on the NAC.
INT edgeSsFreeMegabytes	1.3.6.1.4.1.429.1.24.1.1.1.5	INTEGER	read-only	This object is the unallocated space on drive.
STR edgeSsHwLoadRevision	1.3.6.1.4.1.429.1.24.1.1.1.15	DisplayString	read-only	This object is the revision of the Hardware Load.
INT edgeSsIndex	1.3.6.1.4.1.429.1.24.1.1.1.1	INTEGER	read-only	A unique index identifying the Gateway Card to which the EdgeServer statistics table objects pertain
STR edgeSsInfrastructManufacturer	1.3.6.1.4.1.429.1.24.1.1.1.11	DisplayString	read-only	This object is the Customer Identifier.
INT edgeSsInterruptPerSec	1.3.6.1.4.1.429.1.24.1.1.1.3	INTEGER	read-only	This object is the number of interrupts received and servicced per second.
INT edgeSsMemoryPercentUsed	1.3.6.1.4.1.429.1.24.1.1.1.9	INTEGER	read-only	This object is the physical Used percentage of memory.
INT edgeSsPageFaultsPerSec	1.3.6.1.4.1.429.1.24.1.1.1.10	INTEGER	read-only	This object is the Rate of faulted pages handled by processor per second.
INT edgeSsPercentDiskReadTime	1.3.6.1.4.1.429.1.24.1.1.1.7	INTEGER	read-only	This object is the percent of time disk is busy servicing read requests.
INT edgeSsPercentDiskTime	1.3.6.1.4.1.429.1.24.1.1.1.6	INTEGER	read-only	This object is the percent of time disk is busy servicing read/write requests.
INT edgeSsPercentDiskWriteTime	1.3.6.1.4.1.429.1.24.1.1.1.8	INTEGER	read-only	This object is the percent of time disk is busy servicing write requests.
STR edgeSsPreviousSwLoadRevision	1.3.6.1.4.1.429.1.24.1.1.1.14	DisplayString	read-only	This object is the previous revision of the Software load.
INT edgeSsProcessorTime	1.3.6.1.4.1.429.1.24.1.1.1.2	INTEGER	read-only	This object gives the Time the CPU spen executing non-idle thread.
CTR edgeSsSysUpTime	1.3.6.1.4.1.429.1.24.1.1.1.17	Counter	read-only	This object is the EdgeServer System Up Time in Minutes.
nas	1.3.6.1.4.1.429.1
usr	1.3.6.1.4.1.429

RFC description

Monitors statistics for EdgeServer Gateway Cards in NAS chassis, including processor time, memory usage, disk utilization, and software version information.

Start monitoring Edge server/NAS appliance (OS-level performance counters) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EDGE-MIB

What Is EDGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description