ECPPP-MIB

All MIBs › ECPPP-MIB

Category: Protocol: PPP

Description: Enterprise PPP extension MIB providing vendor-specific objects for managing Point-to-Point Protocol links and parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ECPPP-MIB?

This is an enterprise PPP extension MIB, associated with the "eicon" enterprise branch (Eicon Networks/Eicon Technology, a maker of WAN/ISDN and telephony interface cards), providing vendor-specific objects for managing Point-to-Point Protocol (PPP) links beyond the standard IETF PPP MIB. It exposes per-port PPP link status and negotiated protocol parameters, including link state, authentication protocol in use, quality protocol, negotiated packet size, window size, and compression settings. For monitoring purposes it is directly about link/software status: ecpppStatusState reports whether a PPP link is up/down/negotiating, ecpppStatusAuthentProtocol confirms which authentication method was negotiated, and ecpppStatusNegotiatedPktSize/ecpppStatusWindowSize/ecpppStatusMaxPacketSize reveal the negotiated link parameters useful for diagnosing throughput or fragmentation issues. It supplements the standard IETF PPP MIB family with vendor-specific detail not covered there. It is deployed on Eicon WAN/dial-up adapter cards or routers running PPP links, such as ISDN or leased-line WAN connections. Network engineers evaluating or troubleshooting this functionality can download the ECPPP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ECPPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Eicon WAN/ISDN adapter or router running PPP

Monitoring Examples

A network engineer troubleshooting a slow or flapping WAN link would poll ecpppStatusTable/ecpppStatusEntry keyed by ecpppStatusPortRef to check ecpppStatusState for link stability and ecpppStatusAuthentProtocol to confirm authentication succeeded as configured. ecpppStatusNegotiatedPktSize and ecpppStatusWindowSize would be compared against expected values to spot a suboptimal negotiation causing poor throughput, and ecpppStatusProtocolCompr/ecpppStatusAddrCtrlCompr checked to confirm compression negotiated as expected. A link stuck in a non-"open" ecpppStatusState would indicate a PPP negotiation failure.

What Can Be Monitored

PPP link state
negotiated authentication protocol
negotiated packet size and window size
compression settings
link quality protocol

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
eicon	1.3.6.1.4.1.434
management	1.3.6.1.4.1.434.2
mibv2	1.3.6.1.4.1.434.2.2
ecppp	1.3.6.1.4.1.434.2.2.4.23
ecpppStatusTable	1.3.6.1.4.1.434.2.2.4.23.1		not-accessible	A table containing PPP-link global info
ecpppStatusEntry	1.3.6.1.4.1.434.2.2.4.23.1.1		not-accessible	Global information about a particular PPP Link.
POR ecpppStatusPortRef	1.3.6.1.4.1.434.2.2.4.23.1.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
PPP ecpppStatusState	1.3.6.1.4.1.434.2.2.4.23.1.1.2	PppState	read-only	The state of the ppp connection
INT ecpppStatusAuthentProtocol	1.3.6.1.4.1.434.2.2.4.23.1.1.3	INTEGER	read-only	Authentication protocol used
INT ecpppStatusQualityProtocol	1.3.6.1.4.1.434.2.2.4.23.1.1.4	INTEGER	read-only	Link quality protocol used
INT ecpppStatusNegotiatedPktSize	1.3.6.1.4.1.434.2.2.4.23.1.1.5	INTEGER	read-only	Packet size negotiated.
INT ecpppStatusWindowSize	1.3.6.1.4.1.434.2.2.4.23.1.1.6	INTEGER	read-only
INT ecpppStatusProtocolCompr	1.3.6.1.4.1.434.2.2.4.23.1.1.7	INTEGER	read-only	Protocol Compression
INT ecpppStatusAddrCtrlCompr	1.3.6.1.4.1.434.2.2.4.23.1.1.8	INTEGER	read-only	Address and Control field Compression.
INT ecpppStatusRestartTimer	1.3.6.1.4.1.434.2.2.4.23.1.1.9	INTEGER	read-only	Timeout retransmission
INT ecpppStatusMaxPacketSize	1.3.6.1.4.1.434.2.2.4.23.1.1.10	INTEGER	read-only	Maximum configured
INT ecpppStatusMaxTerminate	1.3.6.1.4.1.434.2.2.4.23.1.1.11	INTEGER	read-only	Maximum Terminate Retransmission
INT ecpppStatusMaxConfig	1.3.6.1.4.1.434.2.2.4.23.1.1.12	INTEGER	read-only	Maximum Configure Retransmission
INT ecpppStatusMaxFailure	1.3.6.1.4.1.434.2.2.4.23.1.1.13	INTEGER	read-only
INT ecpppStatusNcpMask	1.3.6.1.4.1.434.2.2.4.23.1.1.14	INTEGER	read-only	The bitmask value, 1 = IP, 2 = IPX, 4 = AT.
ecpppStatsTable	1.3.6.1.4.1.434.2.2.4.23.2		not-accessible	A table containing PPP-link specific variables for this PPP implementation.
ecpppStatsEntry	1.3.6.1.4.1.434.2.2.4.23.2.1		not-accessible	Management information about a particular PPP Link.
POR ecpppStatsPortRef	1.3.6.1.4.1.434.2.2.4.23.2.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
CTR ecpppStatsLcpReqTx	1.3.6.1.4.1.434.2.2.4.23.2.1.2	Counter	read-only	Number of LCP Configure-Request sent
CTR ecpppStatsLcpReqRx	1.3.6.1.4.1.434.2.2.4.23.2.1.3	Counter	read-only	Number of LCP Configure-Request received
CTR ecpppStatsLcpAckTx	1.3.6.1.4.1.434.2.2.4.23.2.1.4	Counter	read-only	Number of LCP Configure-Ack sent
CTR ecpppStatsLcpAckRx	1.3.6.1.4.1.434.2.2.4.23.2.1.5	Counter	read-only	Number of LCP Configure-Ack received
CTR ecpppStatsLcpNakTx	1.3.6.1.4.1.434.2.2.4.23.2.1.6	Counter	read-only	Number of LCP Configure-Nak sent
CTR ecpppStatsLcpNakRx	1.3.6.1.4.1.434.2.2.4.23.2.1.7	Counter	read-only	Number of LCP Configure-Nak received
CTR ecpppStatsLcpRejTx	1.3.6.1.4.1.434.2.2.4.23.2.1.8	Counter	read-only	Number of LCP Configure-Reject sent
CTR ecpppStatsLcpRejRx	1.3.6.1.4.1.434.2.2.4.23.2.1.9	Counter	read-only	Number of LCP Configure-Reject received
CTR ecpppStatsLcpCodeRejTx	1.3.6.1.4.1.434.2.2.4.23.2.1.10	Counter	read-only	Number of LCP Code-Reject sent
CTR ecpppStatsLcpCodeRejRx	1.3.6.1.4.1.434.2.2.4.23.2.1.11	Counter	read-only	Number of LCP Code-Reject received
CTR ecpppStatsLcpProRejTx	1.3.6.1.4.1.434.2.2.4.23.2.1.12	Counter	read-only	Number of Protocol-Reject sent
CTR ecpppStatsLcpProRejRx	1.3.6.1.4.1.434.2.2.4.23.2.1.13	Counter	read-only	Number of Protocol-Reject received
CTR ecpppStatsLcpEchoReqTx	1.3.6.1.4.1.434.2.2.4.23.2.1.14	Counter	read-only	Number of Echo-Request sent
CTR ecpppStatsLcpEchoReqRx	1.3.6.1.4.1.434.2.2.4.23.2.1.15	Counter	read-only	Number of Echo-Request received
CTR ecpppStatsLcpEchoReplyTx	1.3.6.1.4.1.434.2.2.4.23.2.1.16	Counter	read-only	Number of Echo-Reply sent
CTR ecpppStatsLcpEchoReplyRx	1.3.6.1.4.1.434.2.2.4.23.2.1.17	Counter	read-only	Number of Echo-Reply received
CTR ecpppStatsLcpRestartTimeout	1.3.6.1.4.1.434.2.2.4.23.2.1.18	Counter	read-only	Number of restart timer time-out
CTR ecpppStatsLcpTermRetrans	1.3.6.1.4.1.434.2.2.4.23.2.1.19	Counter	read-only	Number of LCP terminate request retransmissions.
CTR ecpppStatsLcpConfRetrans	1.3.6.1.4.1.434.2.2.4.23.2.1.20	Counter	read-only	Number of LCP configure request retransmissions.
CTR ecpppStatsFrameTx	1.3.6.1.4.1.434.2.2.4.23.2.1.21	Counter	read-only	Number of information frames sent
CTR ecpppStatsFrameRx	1.3.6.1.4.1.434.2.2.4.23.2.1.22	Counter	read-only	Number of information frames received
CTR ecpppStatsCharTx	1.3.6.1.4.1.434.2.2.4.23.2.1.23	Counter	read-only	Number of information characters sent
CTR ecpppStatsCharRx	1.3.6.1.4.1.434.2.2.4.23.2.1.24	Counter	read-only	Number of information characters received
ecpppIPInfoTable	1.3.6.1.4.1.434.2.2.4.23.3		not-accessible	A table for PPP IP Protocol Info
ecpppIPInfoEntry	1.3.6.1.4.1.434.2.2.4.23.3.1		not-accessible	Management information about a particular PPP Link.
POR ecpppIPInfoPortRef	1.3.6.1.4.1.434.2.2.4.23.3.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
NCP ecpppIPInfoNcpState	1.3.6.1.4.1.434.2.2.4.23.3.1.2	NcpState	read-only	State during NCP phase
INT ecpppIPInfoIPComprProtocol	1.3.6.1.4.1.434.2.2.4.23.3.1.3	INTEGER	read-only	Compression protocol
IP ecpppIPInfoIPAddr	1.3.6.1.4.1.434.2.2.4.23.3.1.4	IpAddress	read-only	IP Address
INT ecpppIPInfoIPcpMaxTerm	1.3.6.1.4.1.434.2.2.4.23.3.1.5	INTEGER	read-only	Max. terminate retransmission
INT ecpppIPInfoIPcpMaxConfig	1.3.6.1.4.1.434.2.2.4.23.3.1.6	INTEGER	read-only	Max. configure retransmission
INT ecpppIPInfoIPcpMaxFailure	1.3.6.1.4.1.434.2.2.4.23.3.1.7	INTEGER	read-only	max config_nak retransmission
ecpppIPStatsTable	1.3.6.1.4.1.434.2.2.4.23.4		not-accessible	A table for PPP IP Protocol Stats
ecpppIPStatsEntry	1.3.6.1.4.1.434.2.2.4.23.4.1		not-accessible	Management information about a particular PPP Link.
POR ecpppIPStatsPortRef	1.3.6.1.4.1.434.2.2.4.23.4.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
CTR ecpppIPStatsDatagramsTx	1.3.6.1.4.1.434.2.2.4.23.4.1.2	Counter	read-only	Number of datagrams sent
CTR ecpppIPStatsDatagramsRx	1.3.6.1.4.1.434.2.2.4.23.4.1.3	Counter	read-only	Number of datagrams received
CTR ecpppIPStatsCharTx	1.3.6.1.4.1.434.2.2.4.23.4.1.4	Counter	read-only	Number of characters sent
CTR ecpppIPStatsCharRx	1.3.6.1.4.1.434.2.2.4.23.4.1.5	Counter	read-only	Number of characters received
CTR ecpppIPStatsNcpRestartTimeout	1.3.6.1.4.1.434.2.2.4.23.4.1.6	Counter	read-only	Number of NCP restart timer time-out
CTR ecpppIPStatsNcpTermRetrans	1.3.6.1.4.1.434.2.2.4.23.4.1.7	Counter	read-only	Number of NCP terminate request retransmissions.
CTR ecpppIPStatsNcpReqRetrans	1.3.6.1.4.1.434.2.2.4.23.4.1.8	Counter	read-only	Number of NCP configure request retransmissions.
ecpppIPXInfoTable	1.3.6.1.4.1.434.2.2.4.23.5		not-accessible	A table for PPP IPX Protocol Info.
ecpppIPXInfoEntry	1.3.6.1.4.1.434.2.2.4.23.5.1		not-accessible	Management information about a particular PPP Link.
POR ecpppIPXInfoPortRef	1.3.6.1.4.1.434.2.2.4.23.5.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
NCP ecpppIPXInfoNcpState	1.3.6.1.4.1.434.2.2.4.23.5.1.2	NcpState	read-only	State during NCP phase
INT ecpppIPXInfoIPXcpMaxTerm	1.3.6.1.4.1.434.2.2.4.23.5.1.3	INTEGER	read-only	Max. terminate retransmission
INT ecpppIPXInfoIPXcpMaxConfig	1.3.6.1.4.1.434.2.2.4.23.5.1.4	INTEGER	read-only	Max. configure retransmission
INT ecpppIPXInfoIPXcpMaxFailure	1.3.6.1.4.1.434.2.2.4.23.5.1.5	INTEGER	read-only	Max config_nak retransmission
ecpppIPXStatsTable	1.3.6.1.4.1.434.2.2.4.23.6		not-accessible	A table for PPP IP Protocol Stats.
ecpppIPXStatsEntry	1.3.6.1.4.1.434.2.2.4.23.6.1		not-accessible	Management information about a particular PPP Link.
POR ecpppIPXStatsPortRef	1.3.6.1.4.1.434.2.2.4.23.6.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured.
CTR ecpppIPXStatsDatagramsTx	1.3.6.1.4.1.434.2.2.4.23.6.1.2	Counter	read-only	Number of datagrams sent
CTR ecpppIPXStatsDatagramsRx	1.3.6.1.4.1.434.2.2.4.23.6.1.3	Counter	read-only	Number of datagrams received
CTR ecpppIPXStatsCharTx	1.3.6.1.4.1.434.2.2.4.23.6.1.4	Counter	read-only	Number of characters sent
CTR ecpppIPXStatsCharRx	1.3.6.1.4.1.434.2.2.4.23.6.1.5	Counter	read-only	Number of characters received
CTR ecpppIPXStatsNcpRestartTimeout	1.3.6.1.4.1.434.2.2.4.23.6.1.6	Counter	read-only	Number of NCP restart timer time-out
CTR ecpppIPXStatsNcpTermRetrans	1.3.6.1.4.1.434.2.2.4.23.6.1.7	Counter	read-only	Number of NCP terminate request retransmissions.
CTR ecpppIPXStatsNcpReqRetrans	1.3.6.1.4.1.434.2.2.4.23.6.1.8	Counter	read-only	Number of NCP configure request retransmissions.
ecpppATInfoTable	1.3.6.1.4.1.434.2.2.4.23.7		not-accessible	A table for PPP AT Protocol Info
ecpppATInfoEntry	1.3.6.1.4.1.434.2.2.4.23.7.1		not-accessible	Management information about a particular PPP Link.
POR ecpppATInfoPortRef	1.3.6.1.4.1.434.2.2.4.23.7.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured.
NCP ecpppATInfoNcpState	1.3.6.1.4.1.434.2.2.4.23.7.1.2	NcpState	read-only	State during NCP phase
INT ecpppATInfoRoutingProtocol	1.3.6.1.4.1.434.2.2.4.23.7.1.3	INTEGER	read-only	Type of routing protocol
INT ecpppATInfoComprConfig	1.3.6.1.4.1.434.2.2.4.23.7.1.4	INTEGER	read-only	Compression configuration
INT ecpppATInfoServerClass	1.3.6.1.4.1.434.2.2.4.23.7.1.5	INTEGER	read-only	Class of the remote server
INT ecpppATInfoATAddr	1.3.6.1.4.1.434.2.2.4.23.7.1.6	INTEGER	read-only	Local address
INT ecpppATInfoATNode	1.3.6.1.4.1.434.2.2.4.23.7.1.7	INTEGER	read-only	Local node id
INT ecpppATInfoATcpMaxTerm	1.3.6.1.4.1.434.2.2.4.23.7.1.8	INTEGER	read-only	Max. terminate retransmission
INT ecpppATInfoATcpMaxConfig	1.3.6.1.4.1.434.2.2.4.23.7.1.9	INTEGER	read-only	Max. configure retransmission
INT ecpppATInfoATcpMaxFailure	1.3.6.1.4.1.434.2.2.4.23.7.1.10	INTEGER	read-only	Max config_nak retransmission
STR ecpppATInfoSrvName	1.3.6.1.4.1.434.2.2.4.23.7.1.11	DisplayString	read-only	Length of the server name
STR ecpppATInfoZoneName	1.3.6.1.4.1.434.2.2.4.23.7.1.12	DisplayString	read-only	AT ASCII name of the zone
ecpppATStatsTable	1.3.6.1.4.1.434.2.2.4.23.8		not-accessible	A table for PPP IP Protocol Stats
ecpppATStatsEntry	1.3.6.1.4.1.434.2.2.4.23.8.1		not-accessible	Management information about a particular PPP Link.
POR ecpppATStatsPortRef	1.3.6.1.4.1.434.2.2.4.23.8.1.1	PortRef	read-only	The id of the port on which the parameters in the table are configured
CTR ecpppATStatsDatagramsTx	1.3.6.1.4.1.434.2.2.4.23.8.1.2	Counter	read-only	Number of datagrams sent
CTR ecpppATStatsDatagramsRx	1.3.6.1.4.1.434.2.2.4.23.8.1.3	Counter	read-only	Number of datagrams received
CTR ecpppATStatsCharTx	1.3.6.1.4.1.434.2.2.4.23.8.1.4	Counter	read-only	Number of characters sent
CTR ecpppATStatsCharRx	1.3.6.1.4.1.434.2.2.4.23.8.1.5	Counter	read-only	Number of characters sent
CTR ecpppATStatsNcpRestartTimeout	1.3.6.1.4.1.434.2.2.4.23.8.1.6	Counter	read-only	Number of NCP restart timer time-out
CTR ecpppATStatsNcpTermRetrans	1.3.6.1.4.1.434.2.2.4.23.8.1.7	Counter	read-only	Number of NCP terminate request retransmissions.
CTR ecpppATStatsNcpReqRetrans	1.3.6.1.4.1.434.2.2.4.23.8.1.8	Counter	read-only	Number of NCP configure request retransmissions.

RFC description

Vendor MIB for Ethernet point-to-point protocol extensions and management.

Start monitoring Eicon Networks WAN/ISDN adapter or router running PPP with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ECPPP-MIB

What Is ECPPP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description