Dell-rndApplications

All MIBs › Dell-rndApplications

Organization: Dell

Last Updated: 2004-06-01

Category: Vendor: Dell

Description: Manages application-layer services and protocols running on Dell RND network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-rndApplications?

This private MIB defines application-layer network-management services for Dell devices built on the RAD-derived "rnd" embedded management stack, providing a lightweight polling/alarm framework for monitoring other network elements from the device itself. It exposes a table of monitored remote elements (address, SNMP community, label) along with default polling interval and log file settings, and per-element/per-object alarm enabling and status. As a monitoring/fault-detection tool it is directly about hardware/software status: rndMonitoredElementStatus reports whether a polled remote element is currently reachable/healthy, rndAlarmEnabling and rndAlarmOptions control whether alarms fire on state changes, and rndMonitoredObjectIdentifier lets the device poll an arbitrary OID (e.g. uptime, temperature) on a monitored peer. It relies on standard SNMP GET polling of arbitrary OIDs on other devices, effectively layering a mini-NMS on top of standard SNMP. It is used in Dell RND-based network gear that performs secondary/peer monitoring of other network elements in a small deployment without a full NMS. Engineers can download the Dell-rndApplications file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-rndApplications. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell RND-based network device (bridge/switch)

Monitoring Examples

An administrator configuring peer monitoring would populate rndMonitoredElementsTable/rndMonitoredElementEntry with rndMonitoredElementAddress, rndMonitoredElementCommunity and rndMonitoredElementLabel for each remote device to watch, then poll rndMonitoredElementStatus to see current reachability. rndDefaultPollingInterval would be checked to confirm polling frequency, and rndAlarmEnabling/rndAlarmInterval to verify alarms are active for a status change. A monitored element flipping to a down/unreachable status in rndMonitoredElementStatus would indicate the peer device has stopped responding to SNMP.

What Can Be Monitored

monitored remote element reachability status
polling interval
alarm enabled state
monitored object identifier (arbitrary polled OID)
monitored element address and community

Imported Objects

From Dell-MIB

rnd	MODULE-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlMibInstances	1.3.6.1.4.1.89.35.2.11
rlMibTableInstancesInfoEntry	1.3.6.1.4.1.89.35.2.11.1.1		not-accessible	A row with index rlMibTableInstancesInfoTableName = 'xTable' contains information on current instances in 'xTable'.
INT rlMibTableInstancesInfoNumOfInstances	1.3.6.1.4.1.89.35.2.11.1.1.2	INTEGER	read-only	Get operation on this object will retreive the current number of instances in the MIB table specified by the index rlMibTableInstancesInfoTableName.
rlMibTableInstancesInfoTable	1.3.6.1.4.1.89.35.2.11.1		not-accessible	A table for retreiving information on the current instances in a requested MIB table.
STR rlMibTableInstancesInfoTableName	1.3.6.1.4.1.89.35.2.11.1.1.1	DisplayString	not-accessible	The name of the MIB table (for examle: snmpCommunityTable)
rlMibTree	1.3.6.1.4.1.89.35.2.10
rlMibTreeEntry	1.3.6.1.4.1.89.35.2.10.1.1		not-accessible	Each row shows a tree relationsship in the MIB.
STR rlMibTreeFather	1.3.6.1.4.1.89.35.2.10.1.1.1	DisplayString	not-accessible	The father in a tree relation ship.
STR rlMibTreeGrandFather	1.3.6.1.4.1.89.35.2.10.1.1.5	DisplayString	read-only	The grand father (i.e father's father) in a tree relation ship.
STR rlMibTreeSon	1.3.6.1.4.1.89.35.2.10.1.1.3	DisplayString	read-only	The son in a tree relation ship.
INT rlMibTreeSonIndex	1.3.6.1.4.1.89.35.2.10.1.1.2	INTEGER	not-accessible	Running index for this table.
OID rlMibTreeSonObjectId	1.3.6.1.4.1.89.35.2.10.1.1.4	OBJECT IDENTIFIER	read-only	The object identifier of the son in a tree relation ship.
rlMibTreeTable	1.3.6.1.4.1.89.35.2.10.1		not-accessible	This reflects the MIB tree of the device.
INT rlSnmpServCreateTestPool	1.3.6.1.4.1.89.35.2.9.7	INTEGER	read-write	This variable enables the authorized user to indicate that after its reset the device should create a buffer pool for SNMPServ process PDU testing.
OID rlSnmpServITCbindClients	1.3.6.1.4.1.89.35.2.9.8	OBJECT IDENTIFIER	read-write	This variable enables the authorized user to to indicate that after its reset the device should create ITC clients for SnmpServ data requests clients. The semantics of this variable is as follows: subidentifier 2n indicates whether the client n is synchronous(1) or asynchronous(2) subidentifier 2n+1 indicates the number of simulatneous requests expected by client n.
INT rlSnmpServTestRequest	1.3.6.1.4.1.89.35.2.9.5	INTEGER	read-write	This variable enables the authorized user to test the SNMP SERV package.
OCT rlSnmpServTestResponse	1.3.6.1.4.1.89.35.2.9.6	OCTET STRING	read-only	This variable enables the authorized user to retrieve the results of a the SNMP SERV package test.
rlSnmpTestSimulatedVariables	1.3.6.1.4.1.89.35.2.9.9
rlTstBasicRateEntry	1.3.6.1.4.1.89.35.2.9.10.1		not-accessible	An entry in the rlTstBasicRateTable.
INT rlTstBasicRateIfMode	1.3.6.1.4.1.89.35.2.9.10.1.3	INTEGER	read-write
INT rlTstBasicRateIfType	1.3.6.1.4.1.89.35.2.9.10.1.1	INTEGER	read-write
INT rlTstBasicRateLineTopology	1.3.6.1.4.1.89.35.2.9.10.1.2	INTEGER	read-write
INT rlTstBasicRateSignalMode	1.3.6.1.4.1.89.35.2.9.10.1.4	INTEGER	read-write
rlTstBasicRateTable	1.3.6.1.4.1.89.35.2.9.10		not-accessible	Table for testing SNMP agent.
INT rndAlarmEnabling	1.3.6.1.4.1.89.35.2.2.1	INTEGER	read-write	Indicates whether alarms should be issued to the high-level NMS
INT rndAlarmInterval	1.3.6.1.4.1.89.35.2.2.2	INTEGER	read-write	Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
INT rndAlarmMaxTreshold	1.3.6.1.4.1.89.35.2.4.1.8	INTEGER	read-write	The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
INT rndAlarmMinTreshold	1.3.6.1.4.1.89.35.2.4.1.9	INTEGER	read-write	If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
rndAlarmOptions	1.3.6.1.4.1.89.35.2.2
rndApplications	1.3.6.1.4.1.89.35			The private MIB module definition for RND applications MIB.
STR rndDefaultLogFile	1.3.6.1.4.1.89.35.2.3.1.5	DisplayString	read-write	The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
INT rndDefaultPollingInterval	1.3.6.1.4.1.89.35.2.3.1.4	INTEGER	read-write	The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
ROW rndDeleteValueEntryStatus	1.3.6.1.4.1.89.35.2.8.1.4	RowStatus	read-write	It is used to delete an entry from this table.
rndDeleteValuesEntry	1.3.6.1.4.1.89.35.2.8.1		not-accessible	The row definition for the rndDeleteValuesTable table.
rndDeleteValuesTable	1.3.6.1.4.1.89.35.2.8		not-accessible	This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
INT rndEraseSimulatedConfiguration	1.3.6.1.4.1.89.35.2.7	INTEGER	read-write	eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
T/F rndHardwareConfiguration	1.3.6.1.4.1.89.35.2.6	TruthValue	read-write	Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
rndMibFileEntry	1.3.6.1.4.1.89.35.2.5.1		not-accessible	The row definition for this table.
ROW rndMibFileEntryStatus	1.3.6.1.4.1.89.35.2.5.1.4	RowStatus	read-write	It is used to manage the MIB files table.
INT rndMibFileIndex	1.3.6.1.4.1.89.35.2.5.1.1	INTEGER	read-only	The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
STR rndMibFilePath	1.3.6.1.4.1.89.35.2.5.1.2	DisplayString	read-write	The path of the MIB file in the MIB file server.
INT rndMibFileRefresh	1.3.6.1.4.1.89.35.2.5.1.3	INTEGER	read-write	Indicates if the file should be fetched after setting this entry from the MIB file server.
rndMibFilesTable	1.3.6.1.4.1.89.35.2.5		not-accessible	The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
rndMidLevelManagement	1.3.6.1.4.1.89.35.2
STR rndMonitoredElement	1.3.6.1.4.1.89.35.2.4.1.1	DisplayString	read-only	A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
IP rndMonitoredElementAddress	1.3.6.1.4.1.89.35.2.3.1.1	IpAddress	read-only	The IP address of the monitored element
STR rndMonitoredElementCommunity	1.3.6.1.4.1.89.35.2.3.1.2	DisplayString	read-write	The community of the monitored element
rndMonitoredElementEntry	1.3.6.1.4.1.89.35.2.3.1		not-accessible	The row definition for this table.
STR rndMonitoredElementLabel	1.3.6.1.4.1.89.35.2.3.1.3	DisplayString	read-write	The label assigned by the network manager to the monitored element
rndMonitoredElementsTable	1.3.6.1.4.1.89.35.2.3		not-accessible	The table of monitored elements of the network
ROW rndMonitoredElementStatus	1.3.6.1.4.1.89.35.2.3.1.6	RowStatus	read-write	It is used to manage the monitored elements table and indicates the current monitoring status of an element.
INT rndMonitoredIntegerInstance	1.3.6.1.4.1.89.35.2.4.1.12	INTEGER	read-write
OID rndMonitoredObjectIdentifier	1.3.6.1.4.1.89.35.2.4.1.4	OBJECT IDENTIFIER	read-write	The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
OID rndMonitoredObjectInstance	1.3.6.1.4.1.89.35.2.4.1.5	OBJECT IDENTIFIER	read-write	The instance identifier (key) of the monitored object instance.
STR rndMonitoredObjectInstanceLabel	1.3.6.1.4.1.89.35.2.4.1.2	DisplayString	read-only	The label assigned by the network manager to the monitored object instance
STR rndMonitoredObjectName	1.3.6.1.4.1.89.35.2.4.1.3	DisplayString	read-write	The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
INT rndMonitoredObjectSyntax	1.3.6.1.4.1.89.35.2.4.1.6	INTEGER	read-write	The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
rndMonitoringEntry	1.3.6.1.4.1.89.35.2.4.1		not-accessible	The row definition for this table.
ROW rndMonitoringEntryStatus	1.3.6.1.4.1.89.35.2.4.1.11	RowStatus	read-write	It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
INT rndMonitoringInterval	1.3.6.1.4.1.89.35.2.4.1.7	INTEGER	read-write	The period of time between two consecutive retrievals of the monitored object instance's value.
STR rndMonitoringLogfile	1.3.6.1.4.1.89.35.2.4.1.10	DisplayString	read-write	The entire path of the file in which the results of the monitoring of this object instance should be recorded.
rndMonitoringTable	1.3.6.1.4.1.89.35.2.4		not-accessible	The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
INT rndNotSupportedField	1.3.6.1.4.1.89.35.2.9.1.1.3	INTEGER	read-only	Variable for not supported simulation.
INT rndRowDeleteValue	1.3.6.1.4.1.89.35.2.8.1.3	INTEGER	read-write	The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
OID rndRowStatusObjectId	1.3.6.1.4.1.89.35.2.8.1.2	OBJECT IDENTIFIER	read-write	The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
STR rndRowStatusVariableName	1.3.6.1.4.1.89.35.2.8.1.1	DisplayString	read-write	The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
INT rndSimulatedVariableEntryIndex	1.3.6.1.4.1.89.35.2.9.1.1.1	INTEGER	read-only	The index entry.
ROW rndSimulatedVariableEntryStatus	1.3.6.1.4.1.89.35.2.9.1.1.4	RowStatus	read-write	It is used to delete an entry from this table.
OID rndSimulatedVariableObjectId	1.3.6.1.4.1.89.35.2.9.1.1.2	OBJECT IDENTIFIER	read-write	The object id of the simulated variable. If the simulated variable belongs to a table entry, the entire entry is henceforth supported.
rndSimulatedVariablesEntry	1.3.6.1.4.1.89.35.2.9.1.1		not-accessible	The row definition for the rndSimulatedVariablesTable table.
rndSimulatedVariablesTable	1.3.6.1.4.1.89.35.2.9.1		not-accessible	This table indicates which MIB variables are simulated.
INT rndSimulateUndo	1.3.6.1.4.1.89.35.2.9.4	INTEGER	read-write	This variable enables the authorized user to test the SNMP UNDO feature.
INT rndSnmpTestPassword	1.3.6.1.4.1.89.35.2.9.2	INTEGER	read-write	This variable enables the user supplying the correct code to use the SNMP test feature.
INT rndSnmpTests	1.3.6.1.4.1.89.35.2.9.3	INTEGER	read-write	This variable enables the authorized user to test various SNMP features.
STR rsEraseNvramAfterReset	1.3.6.1.4.1.89.35.6.1	DisplayString	read-write	The name of NVRAM application that will be erased after reset or ALL if all NVRAM should be erased.
rsNvram	1.3.6.1.4.1.89.35.6
rsNvramApplEntry	1.3.6.1.4.1.89.35.6.2.1		not-accessible	The status of NVRAM application table.
INT rsNvramApplIndex	1.3.6.1.4.1.89.35.6.2.1.1	INTEGER	read-only	The index of NVRAM application table.
STR rsNvramApplName	1.3.6.1.4.1.89.35.6.2.1.2	DisplayString	read-only	The name of application used NVRAM.
rsNvramApplTable	1.3.6.1.4.1.89.35.6.2		not-accessible	The NVRAM application table.
IP rsPingAddress	1.3.6.1.4.1.89.35.4.1.1.1	IpAddress	read-write	The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
INT rsPingAvgReturnTime	1.3.6.1.4.1.89.35.4.1.1.10	INTEGER	read-only	The average round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
PIN rsPingCompletionStatus	1.3.6.1.4.1.89.35.4.1.1.12	PingCompletionStatus	read-only	If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
INT rsPingDelay	1.3.6.1.4.1.89.35.4.1.1.5	INTEGER	read-write	Specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
rsPingEntry	1.3.6.1.4.1.89.35.4.1.1		not-accessible	A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
ROW rsPingEntryStatus	1.3.6.1.4.1.89.35.4.1.1.14	RowStatus	read-write	The status of this table entry.
IP rsPingInetAddress	1.3.6.1.4.1.89.35.4.2.1.2	InetAddress	read-write	The address of the device to be pinged. Once an instance of this object is created, its value can not be changed.
IPt rsPingInetAddressType	1.3.6.1.4.1.89.35.4.2.1.1	InetAddressType	read-write	The address type of the device to be pinged. Once an instance of this object is created, its value can not be changed.
INT rsPingInetAvgReturnTime	1.3.6.1.4.1.89.35.4.2.1.11	INTEGER	read-only	The average round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
PIN rsPingInetCompletionStatus	1.3.6.1.4.1.89.35.4.2.1.13	PingCompletionStatus	read-only	If all the echo request packets in this sequence have been responded by valid echo responses, this object is set to ok. Otherwise this status indicates the problem. bad-reply-data indicates that the reply data is not equal to the response data.
INT rsPingInetDelay	1.3.6.1.4.1.89.35.4.2.1.6	INTEGER	read-write	Specifies the minimum amount of time (in milliseconds) to wait before sending the next packet in a sequence after receiving a response. The actual delay may be greater due to internal task scheduling.
rsPingInetEntry	1.3.6.1.4.1.89.35.4.2.1		not-accessible	A ping request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. It must also create in the same PDU the associated instance of the address object. It should also modify in the same PDU the default values for the other configuration objects if the defaults are not appropriate. Once the sequence completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
ROW rsPingInetEntryStatus	1.3.6.1.4.1.89.35.4.2.1.15	RowStatus	read-write	The status of this table entry.
INT rsPingInetMaxReturnTime	1.3.6.1.4.1.89.35.4.2.1.12	INTEGER	read-only	The maximum round trip time (in milliseconds) of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
INT rsPingInetMinReturnTime	1.3.6.1.4.1.89.35.4.2.1.10	INTEGER	read-only	The minimum round trip time (in milliseconds) of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
INT rsPingInetPacketCount	1.3.6.1.4.1.89.35.4.2.1.3	INTEGER	read-write	Specifies the number of ping packets to send to the target in this sequence.
INT rsPingInetPacketSize	1.3.6.1.4.1.89.35.4.2.1.4	INTEGER	read-write	Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
INT rsPingInetPacketTimeout	1.3.6.1.4.1.89.35.4.2.1.5	INTEGER	read-write	Specifies the amount of time (in milliseconds) to wait for a response to a transmitted packet before declaring the packet 'dropped.'
C32 rsPingInetReceivedPackets	1.3.6.1.4.1.89.35.4.2.1.9	Counter32	read-only	The number of ping packets that have been received from the target in this sequence.
C32 rsPingInetSentPackets	1.3.6.1.4.1.89.35.4.2.1.8	Counter32	read-only	The number of ping packets that have been sent to the target in this sequence.
IP rsPingInetSourceAddr	1.3.6.1.4.1.89.35.4.2.1.16	InetAddress	read-write	The status of this table entry.
rsPingInetTable	1.3.6.1.4.1.89.35.4.2		not-accessible	A table of ping request entries.
STR rsPingInetTimeStamp	1.3.6.1.4.1.89.35.4.2.1.14	DisplayString	read-only	The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
T/F rsPingInetTrapOnCompletion	1.3.6.1.4.1.89.35.4.2.1.7	TruthValue	read-write	Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
INT rsPingMaxReturnTime	1.3.6.1.4.1.89.35.4.1.1.11	INTEGER	read-only	The maximum round trip time of all the packets that have been sent in this sequence.The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
rsPingMIB	1.3.6.1.4.1.89.35.4
INT rsPingMinReturnTime	1.3.6.1.4.1.89.35.4.1.1.9	INTEGER	read-only	The minimum round trip time of all the packets that have been sent in this sequence. The value returned to a GET request is meaningless if no ping response in a sequence has been received yet.
INT rsPingPacketCount	1.3.6.1.4.1.89.35.4.1.1.2	INTEGER	read-write	Specifies the number of ping packets to send to the target in this sequence.
INT rsPingPacketSize	1.3.6.1.4.1.89.35.4.1.1.3	INTEGER	read-write	Specifies the size of ping packets to send to the target in this sequence. The lower and upper boundaries of this object are implementation dependent.
INT rsPingPacketTimeout	1.3.6.1.4.1.89.35.4.1.1.4	INTEGER	read-write	Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped.'
C32 rsPingReceivedPackets	1.3.6.1.4.1.89.35.4.1.1.8	Counter32	read-only	The number of ping packets that have been received from the target in this sequence.
C32 rsPingSentPackets	1.3.6.1.4.1.89.35.4.1.1.7	Counter32	read-only	The number of ping packets that have been sent to the target in this sequence.
rsPingTable	1.3.6.1.4.1.89.35.4.1		not-accessible	A table of ping request entries.
STR rsPingTimeStamp	1.3.6.1.4.1.89.35.4.1.1.13	DisplayString	read-only	The time-stamp indicating the time and date of creation or last update of this request. The format of the time-stamp is dd/mm/yyyy hh:mm:ss
T/F rsPingTrapOnCompletion	1.3.6.1.4.1.89.35.4.1.1.6	TruthValue	read-write	Specifies whether or not a rsPingCompletion trap should be issued on completion of the sequence of pings. If such a trap is desired, the NMS should ensure that the community table contains an instance specified by the NMSs IP address with rndCommunityTrapsEnable = trapsEnable.
rsPowerSupplyRedundacy	1.3.6.1.4.1.89.35.5
rsPowerSupplyRedundacyEntry	1.3.6.1.4.1.89.35.5.1.1		not-accessible	The status of power supply redundancy for this table.
INT rsPowerSupplyRedundacyReNumber	1.3.6.1.4.1.89.35.5.1.1.1	INTEGER	read-only	This number identifies the module backed up by power supply redundancy in the stack.
INT rsPowerSupplyRedundacyStatus	1.3.6.1.4.1.89.35.5.1.1.2	INTEGER	read-only	The status of a power supply redundancy of the entry.
rsPowerSupplyRedundacyTable	1.3.6.1.4.1.89.35.5.1		not-accessible	The power supply redundancy table.
snmpTesting	1.3.6.1.4.1.89.35.2.9

RFC description

Dell private MIB for managing applications and mid-level management alarms on Dell devices.

Start monitoring Dell RND-based network device (embedded remote-element monitoring/alarming) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-rndApplications

What Is Dell-rndApplications?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description