Dell-rlLcli-MIB

All MIBs › Dell-rlLcli-MIB

Organization: Dell

Last Updated: 2007--0-7-

Category: Vendor: Dell

Description: Covers configuration of local CLI access, including access restrictions, on Dell network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-rlLcli-MIB?

This is a Dell/RoamAbout-lineage (rl-prefixed, from the Dell MTS/NetVanta-style networking software family) private enterprise MIB governing the local command-line interface (CLI) of the switch or router. It exposes configuration-oriented data: CLI session timeout, command history buffering, and a per-command authorization table that assigns access levels and context names to individual CLI commands. Rather than hardware health, its monitoring value is administrative and security-oriented, letting an operator confirm CLI timeout settings, verify history retention size, and audit which command levels/contexts are assigned to sensitive commands to catch unauthorized privilege changes. It has no apparent hard dependency beyond standard SNMPv2-SMI/enterprise conventions used across the Dell MTS MIB family. It is typically deployed in configuration-management and security-auditing tooling for Dell enterprise switches/routers rather than in performance dashboards. Engineers can download the Dell-rlLcli-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-rlLcli-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell enterprise switch/router (MTS-based)

Monitoring Examples

An administrator would poll rlLCliTimeout and rlLCliHistoryEnable/rlLCliHistorySize to confirm CLI idle-timeout and history-buffer policy is applied consistently across a fleet. Walking rlLcliCommandLevelTable (indexed by rlLcliCommandLevelCommandName and rlLcliCommandLevelContextName) reveals the configured rlLcliCommandLevelCommandLevel and rlLcliCommandLevelActionMode for each command, letting the admin flag any command whose access level was unexpectedly lowered. rlLcliCommandLevelStatus (a RowStatus) shows whether a given command-level entry is active, useful for detecting stale or unintentionally created rules.

What Can Be Monitored

CLI session timeout
CLI history enable/size
per-command access level
command context assignment
command-level row status

Imported Objects

From Dell-MIB

rnd	MODULE-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlLCli	1.3.6.1.4.1.89.74			The private MIB module definition for Dell CLI MIB.
INT rlLCliMibVersion	1.3.6.1.4.1.89.74.1	INTEGER	read-only	MIB's version, the current version is 3.
U32 rlLCliTimeout	1.3.6.1.4.1.89.74.2	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected.
T/F rlLCliHistoryEnable	1.3.6.1.4.1.89.74.3	TruthValue	read-write	Indicates if command history function is supported.
U32 rlLCliHistorySize	1.3.6.1.4.1.89.74.4	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer.
rlLcliCommandLevelTable	1.3.6.1.4.1.89.74.5		not-accessible	This Table maps a CLI command to its level.
rlLcliCommandLevelEntry	1.3.6.1.4.1.89.74.5.1		not-accessible	The row definition for this table.
STR rlLcliCommandLevelCommandName	1.3.6.1.4.1.89.74.5.1.1	DisplayString	read-write	The CLI command name
STR rlLcliCommandLevelContextName	1.3.6.1.4.1.89.74.5.1.2	DisplayString	read-write	The CLI context ID which the command name is associated with
TIK rlLcliCommandLevelInsertTime	1.3.6.1.4.1.89.74.5.1.3	TimeTicks	read-write	The time elapsed until this entry was created.
INT rlLcliCommandLevelCommandLevel	1.3.6.1.4.1.89.74.5.1.4	INTEGER	read-write	The level which is associated with the command name
INT rlLcliCommandLevelActionMode	1.3.6.1.4.1.89.74.5.1.5	INTEGER	read-write	The level action which is associated with the command name
ROW rlLcliCommandLevelStatus	1.3.6.1.4.1.89.74.5.1.6	RowStatus	read-write	The status of the commandLevel table entry.
U32 rlLCliSshTimeout	1.3.6.1.4.1.89.74.6	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on SSH LCLI.
U32 rlLCliTelnetTimeout	1.3.6.1.4.1.89.74.7	Unsigned32	read-write	LCLI Timeout indicates the interval in seconds, that the system waits until user input is detected on telnet LCLI.
T/F rlLCliTelnetHistoryEnable	1.3.6.1.4.1.89.74.8	TruthValue	read-write	Indicates if command history function is supported for Telnet.
U32 rlLCliTelnetHistorySize	1.3.6.1.4.1.89.74.9	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer for Telnet.
T/F rlLCliSshHistoryEnable	1.3.6.1.4.1.89.74.10	TruthValue	read-write	Indicates if command history function is supported for Ssh.
U32 rlLCliSshHistorySize	1.3.6.1.4.1.89.74.11	Unsigned32	read-write	Indicates number of commands that the system will record in its history buffer for Ssh.

RFC description

Manages local CLI access configuration and restrictions on Dell network devices.

Start monitoring Dell enterprise switch/router, MTS-based (local CLI session config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-rlLcli-MIB

What Is Dell-rlLcli-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description