Dell-VRTX-DHCPCL-MIB

All MIBs › Dell-VRTX-DHCPCL-MIB

Organization: Dell

Last Updated: 2007-01-02

Category: Protocol: DHCP, Vendor: Dell

Description:

Manages DHCP client configuration and lease status for the Dell VRTX switch module.

Imported Objects

rnd	MODULE-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

What Is Dell-VRTX-DHCPCL-MIB?

This private MIB module manages DHCP client behavior on a Dell PowerEdge VRTX chassis switch module, built on the RAD/"rl"-prefixed embedded switch OS common to several Dell-branded switching products. It exposes per-interface DHCP client action/status data and a DHCP approval mechanism that lets an administrator review and approve DHCP-assigned addresses before they take effect. As monitoring/status data it surfaces DHCP client action status per interface (rlDhcpClActionStatus), the assigned host name (rlDhcpClActionHostName), and a waiting-approval table showing address, mask, and gateway pending administrator sign-off -- useful for confirming whether a management interface obtained a valid address or is stalled. It works alongside standard IETF interface and IP addressing MIBs since DHCP client status is tied to a specific ifIndex. It is deployed on the management/network interfaces of Dell VRTX chassis switch modules where DHCP is used for automatic address assignment requiring administrative approval before activation. Engineers can download the Dell-VRTX-DHCPCL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-VRTX-DHCPCL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

DHCP client action status per interface
assigned host name
DHCP approval enabled/disabled
addresses awaiting approval
pending address, subnet mask and gateway

Supported Devices

Dell PowerEdge VRTX chassis switch module

Monitoring Examples

An operator would poll rlDhcpClActionTable/rlDhcpClActionEntry keyed by rlDhcpClActionIfIndex to see the current rlDhcpClActionStatus and rlDhcpClActionHostName for the management interface, confirming whether a DHCP lease was successfully obtained. If rlDhcpApprovalEnabled is set, the rlDhcpApprovalWaitingTable would be checked for entries stuck awaiting approval (rlDhcpApprovalWaitingAddress, rlDhcpApprovalWaitingGateway) which would explain why an interface has not come up with a usable IP address. A stalled or empty status here typically indicates a DHCP server reachability problem or an unapproved lease blocking connectivity.

OIDs

OID symbolic	OID numeric	Type	Access	Description
IP rlDhcpApprovalActionAddress	1.3.6.1.4.1.89.76.6.1.2	IpAddress	read-only	IP Address.
T/F rlDhcpApprovalActionApprove	1.3.6.1.4.1.89.76.6.1.4	TruthValue	read-write	Approve or decline ip address.
rlDhcpApprovalActionEntry	1.3.6.1.4.1.89.76.6.1		not-accessible	An entry in rlDhcpApprovalActionTable.
NUM rlDhcpApprovalActionIfIndex	1.3.6.1.4.1.89.76.6.1.1	InterfaceIndex	read-only	IP interface ifIndex.
IP rlDhcpApprovalActionMask	1.3.6.1.4.1.89.76.6.1.3	IpAddress	read-only	IP Address mask.
rlDhcpApprovalActionTable	1.3.6.1.4.1.89.76.6		not-accessible	Action for waiting ip address (approve/decline).
T/F rlDhcpApprovalEnabled	1.3.6.1.4.1.89.76.4	TruthValue	read-only	DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
IP rlDhcpApprovalWaitingAddress	1.3.6.1.4.1.89.76.5.1.2	IpAddress	read-only	IP Address waiting for approval.
rlDhcpApprovalWaitingEntry	1.3.6.1.4.1.89.76.5.1		not-accessible	An entry in rlDhcpApprovalWaitingTable.
IP rlDhcpApprovalWaitingGateway	1.3.6.1.4.1.89.76.5.1.4	IpAddress	read-only	Default gateway of received address.
NUM rlDhcpApprovalWaitingIfIndex	1.3.6.1.4.1.89.76.5.1.1	InterfaceIndex	read-only	IP interface ifIndex.
IP rlDhcpApprovalWaitingMask	1.3.6.1.4.1.89.76.5.1.3	IpAddress	read-only	Mask waiting for approval.
rlDhcpApprovalWaitingTable	1.3.6.1.4.1.89.76.5		not-accessible	IP addresses waiting for approval.
rlDhcpCl	1.3.6.1.4.1.89.76			This private MIB module defines DHCP CL private MIBs.
rlDhcpClActionEntry	1.3.6.1.4.1.89.76.3.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
STR rlDhcpClActionHostName	1.3.6.1.4.1.89.76.3.1.3	SnmpAdminString	read-create	This option specifies the name of the client.
NUM rlDhcpClActionIfIndex	1.3.6.1.4.1.89.76.3.1.1	InterfaceIndex	read-only	The interface which the action is implemented for or NULL if it implemented for all device.
ROW rlDhcpClActionStatus	1.3.6.1.4.1.89.76.3.1.2	RowStatus	read-create	The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
rlDhcpClActionTable	1.3.6.1.4.1.89.76.3		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
T/F rlDhcpClAutoConfigAutoSave	1.3.6.1.4.1.89.76.20	TruthValue	read-write	Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
T/F rlDhcpClAutoConfigForce	1.3.6.1.4.1.89.76.19	TruthValue	read-write	Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
INT rlDhcpClAutoConfigProtocol	1.3.6.1.4.1.89.76.22	INTEGER	read-write	Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
STR rlDhcpClAutoConfigScpFileExtention	1.3.6.1.4.1.89.76.23	DisplayString	read-write	Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
INT rlDhcpClAutoConfigStatus	1.3.6.1.4.1.89.76.21	INTEGER	read-only	Describes the status of current/last DHCP auto-config process.
T/F rlDhcpClAutoUpdateEnabled	1.3.6.1.4.1.89.76.17	TruthValue	read-write	Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
INT rlDhcpClAutoUpdateProtocol	1.3.6.1.4.1.89.76.30	INTEGER	read-write	Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
STR rlDhcpClAutoUpdateScpFileExtention	1.3.6.1.4.1.89.76.31	DisplayString	read-write	Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.
INT rlDhcpClAutoUpdateStatus	1.3.6.1.4.1.89.76.18	INTEGER	read-only	Describes the status of current/last DHCP auto-update process.
INT rlDhcpClCommandAction	1.3.6.1.4.1.89.76.7.1.2	INTEGER	read-write	Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false.
rlDhcpClCommandEntry	1.3.6.1.4.1.89.76.7.1		not-accessible	The row definition for this table.
rlDhcpClCommandTable	1.3.6.1.4.1.89.76.7		read-only	Action MIB for DHCP Renew command.
STR rlDhcpClConfigurationFileName	1.3.6.1.4.1.89.76.8	DisplayString	read-write	The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
INT rlDhcpClEnabledByDefaultRemovedIfindex	1.3.6.1.4.1.89.76.16	INTEGER	read-write	DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
IP rlDhcpClInformationDefaultGateway	1.3.6.1.4.1.89.76.27.1.6	IpAddress	read-only	Default Gateway IP Address.
IP rlDhcpClInformationDnsServerListAddress	1.3.6.1.4.1.89.76.28.1.3	IpAddress	read-only	DNS server address received by DHCP client
rlDhcpClInformationDnsServerListEntry	1.3.6.1.4.1.89.76.28.1		not-accessible	An entry in rlDhcpClInformationDnsServerListTable.
NUM rlDhcpClInformationDnsServerListIfIndex	1.3.6.1.4.1.89.76.28.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationDnsServerListEntry.
INT rlDhcpClInformationDnsServerListPriority	1.3.6.1.4.1.89.76.28.1.2	INTEGER	not-accessible	The priority of the entry.
rlDhcpClInformationDnsServerListTable	1.3.6.1.4.1.89.76.28		not-accessible	The table saved the list of DNS servers received by DHCP client.
STR rlDhcpClInformationDomainName	1.3.6.1.4.1.89.76.27.1.8	DisplayString	read-only	The Domain name received by DHCP client.
rlDhcpClInformationEntry	1.3.6.1.4.1.89.76.27.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
STR rlDhcpClInformationHostName	1.3.6.1.4.1.89.76.27.1.7	SnmpAdminString	read-only	Specifies the name of the client.
NUM rlDhcpClInformationIfIndex	1.3.6.1.4.1.89.76.27.1.1	InterfaceIndex	read-only	The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
IP rlDhcpClInformationIpAddress	1.3.6.1.4.1.89.76.27.1.2	IpAddress	read-only	IP Address allocated by DHCP server.
IP rlDhcpClInformationIpMask	1.3.6.1.4.1.89.76.27.1.3	IpAddress	read-only	IP Address mask allocated by DHCP server.
U32 rlDhcpClInformationT1	1.3.6.1.4.1.89.76.27.1.4	Unsigned32	read-only	T1 timer value.
U32 rlDhcpClInformationT2	1.3.6.1.4.1.89.76.27.1.5	Unsigned32	read-only	T2 timer value.
rlDhcpClInformationTable	1.3.6.1.4.1.89.76.27		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
STR rlDhcpClInformationTftpFileName	1.3.6.1.4.1.89.76.27.1.10	DisplayString	read-only	Name of file to use in configuration process received by DHCP client.
STR rlDhcpClInformationTftpImageName	1.3.6.1.4.1.89.76.27.1.12	DisplayString	read-only	Image filename to use in autoupdate process received by DHCP client.
IP rlDhcpClInformationTftpServerListAddress	1.3.6.1.4.1.89.76.29.1.3	IpAddress	read-only	Tftp server address received by DHCP client
rlDhcpClInformationTftpServerListEntry	1.3.6.1.4.1.89.76.29.1		not-accessible	An entry in rlDhcpClInformationTftpServerListTable.
NUM rlDhcpClInformationTftpServerListIfIndex	1.3.6.1.4.1.89.76.29.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationTftpServerListEntry.
INT rlDhcpClInformationTftpServerListPriority	1.3.6.1.4.1.89.76.29.1.2	INTEGER	not-accessible	The priority of the entry.
rlDhcpClInformationTftpServerListTable	1.3.6.1.4.1.89.76.29		not-accessible	The table saved the list of Tftp servers received by DHCP client.
STR rlDhcpClInformationTftpServerName	1.3.6.1.4.1.89.76.27.1.9	DisplayString	read-only	The Tftp server name received by DHCP client.
STR rlDhcpClInformationTimeZone	1.3.6.1.4.1.89.76.27.1.11	DisplayString	read-only	The timezone received by DHCP client.
rlDhcpClManualAutoConfigDataEntry	1.3.6.1.4.1.89.76.26.1		not-accessible	An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
INT rlDhcpClManualAutoConfigDataIndex	1.3.6.1.4.1.89.76.26.1.1	INTEGER	not-accessible	The index of this row. There is only one entry in this table, whose index is 1.
rlDhcpClManualAutoConfigDataTable	1.3.6.1.4.1.89.76.26		not-accessible	A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
STR rlDhcpClManualConfigurationFileName	1.3.6.1.4.1.89.76.13	DisplayString	read-write	The manually configured file name.
STR rlDhcpClManualImageIndirectFileName	1.3.6.1.4.1.89.76.26.1.4	DisplayString	read-write	Manually configured indirect file name, that holds the name of the image file to download.
IP rlDhcpClManualServerInetAddress	1.3.6.1.4.1.89.76.26.1.3	InetAddress	read-write	Manually configured inet Address of remote server.
IPt rlDhcpClManualServerInetAddressType	1.3.6.1.4.1.89.76.26.1.2	InetAddressType	read-write	Manually configured inet Address type of remote server.
IP rlDhcpClManualTftpServerAddress	1.3.6.1.4.1.89.76.10	IpAddress	read-write	Manually configured TFTP server IP Address.
INT rlDhcpClOption67Enable	1.3.6.1.4.1.89.76.9	INTEGER	read-write	Defines whether the configuration file can be downloaded from DHCP packet option 67.
STR rlDhcpClSelectedConfigurationFileName	1.3.6.1.4.1.89.76.14	DisplayString	read-only	The selected configuration file name.
INT rlDhcpClSelectedConfigurationFileNameOrigin	1.3.6.1.4.1.89.76.15	INTEGER	read-only	The selected configuration files name origin.
IP rlDhcpClSelectedTftpServerAddress	1.3.6.1.4.1.89.76.11	IpAddress	read-only	Currently selected TFTP server IP Address.
INT rlDhcpClSelectedTftpServerAddressOrigin	1.3.6.1.4.1.89.76.12	INTEGER	read-only	Currently selected TFTP server IP Address's origin
IP rlDhcpClSelectedTftpServerInetAddress	1.3.6.1.4.1.89.76.25	InetAddress	read-only	Currently selected TFTP server inet Address.
IPt rlDhcpClSelectedTftpServerInetAddressType	1.3.6.1.4.1.89.76.24	InetAddressType	read-only	Currently selected TFTP server Inet Address type.

OID symbolic	OID numeric	Type	Access	Description
rlDhcpCl	1.3.6.1.4.1.89.76			This private MIB module defines DHCP CL private MIBs.
rlDhcpClActionTable	1.3.6.1.4.1.89.76.3		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
rlDhcpClActionEntry	1.3.6.1.4.1.89.76.3.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
NUM rlDhcpClActionIfIndex	1.3.6.1.4.1.89.76.3.1.1	InterfaceIndex	read-only	The interface which the action is implemented for or NULL if it implemented for all device.
ROW rlDhcpClActionStatus	1.3.6.1.4.1.89.76.3.1.2	RowStatus	read-create	The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
STR rlDhcpClActionHostName	1.3.6.1.4.1.89.76.3.1.3	SnmpAdminString	read-create	This option specifies the name of the client.
T/F rlDhcpApprovalEnabled	1.3.6.1.4.1.89.76.4	TruthValue	read-only	DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
rlDhcpApprovalWaitingTable	1.3.6.1.4.1.89.76.5		not-accessible	IP addresses waiting for approval.
rlDhcpApprovalWaitingEntry	1.3.6.1.4.1.89.76.5.1		not-accessible	An entry in rlDhcpApprovalWaitingTable.
NUM rlDhcpApprovalWaitingIfIndex	1.3.6.1.4.1.89.76.5.1.1	InterfaceIndex	read-only	IP interface ifIndex.
IP rlDhcpApprovalWaitingAddress	1.3.6.1.4.1.89.76.5.1.2	IpAddress	read-only	IP Address waiting for approval.
IP rlDhcpApprovalWaitingMask	1.3.6.1.4.1.89.76.5.1.3	IpAddress	read-only	Mask waiting for approval.
IP rlDhcpApprovalWaitingGateway	1.3.6.1.4.1.89.76.5.1.4	IpAddress	read-only	Default gateway of received address.
rlDhcpApprovalActionTable	1.3.6.1.4.1.89.76.6		not-accessible	Action for waiting ip address (approve/decline).
rlDhcpApprovalActionEntry	1.3.6.1.4.1.89.76.6.1		not-accessible	An entry in rlDhcpApprovalActionTable.
NUM rlDhcpApprovalActionIfIndex	1.3.6.1.4.1.89.76.6.1.1	InterfaceIndex	read-only	IP interface ifIndex.
IP rlDhcpApprovalActionAddress	1.3.6.1.4.1.89.76.6.1.2	IpAddress	read-only	IP Address.
IP rlDhcpApprovalActionMask	1.3.6.1.4.1.89.76.6.1.3	IpAddress	read-only	IP Address mask.
T/F rlDhcpApprovalActionApprove	1.3.6.1.4.1.89.76.6.1.4	TruthValue	read-write	Approve or decline ip address.
rlDhcpClCommandTable	1.3.6.1.4.1.89.76.7		read-only	Action MIB for DHCP Renew command.
rlDhcpClCommandEntry	1.3.6.1.4.1.89.76.7.1		not-accessible	The row definition for this table.
INT rlDhcpClCommandAction	1.3.6.1.4.1.89.76.7.1.2	INTEGER	read-write	Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false.
STR rlDhcpClConfigurationFileName	1.3.6.1.4.1.89.76.8	DisplayString	read-write	The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
INT rlDhcpClOption67Enable	1.3.6.1.4.1.89.76.9	INTEGER	read-write	Defines whether the configuration file can be downloaded from DHCP packet option 67.
IP rlDhcpClManualTftpServerAddress	1.3.6.1.4.1.89.76.10	IpAddress	read-write	Manually configured TFTP server IP Address.
IP rlDhcpClSelectedTftpServerAddress	1.3.6.1.4.1.89.76.11	IpAddress	read-only	Currently selected TFTP server IP Address.
INT rlDhcpClSelectedTftpServerAddressOrigin	1.3.6.1.4.1.89.76.12	INTEGER	read-only	Currently selected TFTP server IP Address's origin
STR rlDhcpClManualConfigurationFileName	1.3.6.1.4.1.89.76.13	DisplayString	read-write	The manually configured file name.
STR rlDhcpClSelectedConfigurationFileName	1.3.6.1.4.1.89.76.14	DisplayString	read-only	The selected configuration file name.
INT rlDhcpClSelectedConfigurationFileNameOrigin	1.3.6.1.4.1.89.76.15	INTEGER	read-only	The selected configuration files name origin.
INT rlDhcpClEnabledByDefaultRemovedIfindex	1.3.6.1.4.1.89.76.16	INTEGER	read-write	DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
T/F rlDhcpClAutoUpdateEnabled	1.3.6.1.4.1.89.76.17	TruthValue	read-write	Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
INT rlDhcpClAutoUpdateStatus	1.3.6.1.4.1.89.76.18	INTEGER	read-only	Describes the status of current/last DHCP auto-update process.
T/F rlDhcpClAutoConfigForce	1.3.6.1.4.1.89.76.19	TruthValue	read-write	Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
T/F rlDhcpClAutoConfigAutoSave	1.3.6.1.4.1.89.76.20	TruthValue	read-write	Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
INT rlDhcpClAutoConfigStatus	1.3.6.1.4.1.89.76.21	INTEGER	read-only	Describes the status of current/last DHCP auto-config process.
INT rlDhcpClAutoConfigProtocol	1.3.6.1.4.1.89.76.22	INTEGER	read-write	Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
STR rlDhcpClAutoConfigScpFileExtention	1.3.6.1.4.1.89.76.23	DisplayString	read-write	Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
IPt rlDhcpClSelectedTftpServerInetAddressType	1.3.6.1.4.1.89.76.24	InetAddressType	read-only	Currently selected TFTP server Inet Address type.
IP rlDhcpClSelectedTftpServerInetAddress	1.3.6.1.4.1.89.76.25	InetAddress	read-only	Currently selected TFTP server inet Address.
rlDhcpClManualAutoConfigDataTable	1.3.6.1.4.1.89.76.26		not-accessible	A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
rlDhcpClManualAutoConfigDataEntry	1.3.6.1.4.1.89.76.26.1		not-accessible	An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
INT rlDhcpClManualAutoConfigDataIndex	1.3.6.1.4.1.89.76.26.1.1	INTEGER	not-accessible	The index of this row. There is only one entry in this table, whose index is 1.
IPt rlDhcpClManualServerInetAddressType	1.3.6.1.4.1.89.76.26.1.2	InetAddressType	read-write	Manually configured inet Address type of remote server.
IP rlDhcpClManualServerInetAddress	1.3.6.1.4.1.89.76.26.1.3	InetAddress	read-write	Manually configured inet Address of remote server.
STR rlDhcpClManualImageIndirectFileName	1.3.6.1.4.1.89.76.26.1.4	DisplayString	read-write	Manually configured indirect file name, that holds the name of the image file to download.
rlDhcpClInformationTable	1.3.6.1.4.1.89.76.27		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
rlDhcpClInformationEntry	1.3.6.1.4.1.89.76.27.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
NUM rlDhcpClInformationIfIndex	1.3.6.1.4.1.89.76.27.1.1	InterfaceIndex	read-only	The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
IP rlDhcpClInformationIpAddress	1.3.6.1.4.1.89.76.27.1.2	IpAddress	read-only	IP Address allocated by DHCP server.
IP rlDhcpClInformationIpMask	1.3.6.1.4.1.89.76.27.1.3	IpAddress	read-only	IP Address mask allocated by DHCP server.
U32 rlDhcpClInformationT1	1.3.6.1.4.1.89.76.27.1.4	Unsigned32	read-only	T1 timer value.
U32 rlDhcpClInformationT2	1.3.6.1.4.1.89.76.27.1.5	Unsigned32	read-only	T2 timer value.
IP rlDhcpClInformationDefaultGateway	1.3.6.1.4.1.89.76.27.1.6	IpAddress	read-only	Default Gateway IP Address.
STR rlDhcpClInformationHostName	1.3.6.1.4.1.89.76.27.1.7	SnmpAdminString	read-only	Specifies the name of the client.
STR rlDhcpClInformationDomainName	1.3.6.1.4.1.89.76.27.1.8	DisplayString	read-only	The Domain name received by DHCP client.
STR rlDhcpClInformationTftpServerName	1.3.6.1.4.1.89.76.27.1.9	DisplayString	read-only	The Tftp server name received by DHCP client.
STR rlDhcpClInformationTftpFileName	1.3.6.1.4.1.89.76.27.1.10	DisplayString	read-only	Name of file to use in configuration process received by DHCP client.
STR rlDhcpClInformationTimeZone	1.3.6.1.4.1.89.76.27.1.11	DisplayString	read-only	The timezone received by DHCP client.
STR rlDhcpClInformationTftpImageName	1.3.6.1.4.1.89.76.27.1.12	DisplayString	read-only	Image filename to use in autoupdate process received by DHCP client.
rlDhcpClInformationDnsServerListTable	1.3.6.1.4.1.89.76.28		not-accessible	The table saved the list of DNS servers received by DHCP client.
rlDhcpClInformationDnsServerListEntry	1.3.6.1.4.1.89.76.28.1		not-accessible	An entry in rlDhcpClInformationDnsServerListTable.
NUM rlDhcpClInformationDnsServerListIfIndex	1.3.6.1.4.1.89.76.28.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationDnsServerListEntry.
INT rlDhcpClInformationDnsServerListPriority	1.3.6.1.4.1.89.76.28.1.2	INTEGER	not-accessible	The priority of the entry.
IP rlDhcpClInformationDnsServerListAddress	1.3.6.1.4.1.89.76.28.1.3	IpAddress	read-only	DNS server address received by DHCP client
rlDhcpClInformationTftpServerListTable	1.3.6.1.4.1.89.76.29		not-accessible	The table saved the list of Tftp servers received by DHCP client.
rlDhcpClInformationTftpServerListEntry	1.3.6.1.4.1.89.76.29.1		not-accessible	An entry in rlDhcpClInformationTftpServerListTable.
NUM rlDhcpClInformationTftpServerListIfIndex	1.3.6.1.4.1.89.76.29.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationTftpServerListEntry.
INT rlDhcpClInformationTftpServerListPriority	1.3.6.1.4.1.89.76.29.1.2	INTEGER	not-accessible	The priority of the entry.
IP rlDhcpClInformationTftpServerListAddress	1.3.6.1.4.1.89.76.29.1.3	IpAddress	read-only	Tftp server address received by DHCP client
INT rlDhcpClAutoUpdateProtocol	1.3.6.1.4.1.89.76.30	INTEGER	read-write	Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
STR rlDhcpClAutoUpdateScpFileExtention	1.3.6.1.4.1.89.76.31	DisplayString	read-write	Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.

DisplayString (11)
STR rlDhcpClAutoConfigScpFileExtention	1.3.6.1.4.1.89.76.23	DisplayString	read-write	Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
STR rlDhcpClAutoUpdateScpFileExtention	1.3.6.1.4.1.89.76.31	DisplayString	read-write	Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.
STR rlDhcpClConfigurationFileName	1.3.6.1.4.1.89.76.8	DisplayString	read-write	The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
STR rlDhcpClInformationDomainName	1.3.6.1.4.1.89.76.27.1.8	DisplayString	read-only	The Domain name received by DHCP client.
STR rlDhcpClInformationTftpFileName	1.3.6.1.4.1.89.76.27.1.10	DisplayString	read-only	Name of file to use in configuration process received by DHCP client.
STR rlDhcpClInformationTftpImageName	1.3.6.1.4.1.89.76.27.1.12	DisplayString	read-only	Image filename to use in autoupdate process received by DHCP client.
STR rlDhcpClInformationTftpServerName	1.3.6.1.4.1.89.76.27.1.9	DisplayString	read-only	The Tftp server name received by DHCP client.
STR rlDhcpClInformationTimeZone	1.3.6.1.4.1.89.76.27.1.11	DisplayString	read-only	The timezone received by DHCP client.
STR rlDhcpClManualConfigurationFileName	1.3.6.1.4.1.89.76.13	DisplayString	read-write	The manually configured file name.
STR rlDhcpClManualImageIndirectFileName	1.3.6.1.4.1.89.76.26.1.4	DisplayString	read-write	Manually configured indirect file name, that holds the name of the image file to download.
STR rlDhcpClSelectedConfigurationFileName	1.3.6.1.4.1.89.76.14	DisplayString	read-only	The selected configuration file name.
InetAddress (2)
IP rlDhcpClManualServerInetAddress	1.3.6.1.4.1.89.76.26.1.3	InetAddress	read-write	Manually configured inet Address of remote server.
IP rlDhcpClSelectedTftpServerInetAddress	1.3.6.1.4.1.89.76.25	InetAddress	read-only	Currently selected TFTP server inet Address.
InetAddressType (2)
IPt rlDhcpClManualServerInetAddressType	1.3.6.1.4.1.89.76.26.1.2	InetAddressType	read-write	Manually configured inet Address type of remote server.
IPt rlDhcpClSelectedTftpServerInetAddressType	1.3.6.1.4.1.89.76.24	InetAddressType	read-only	Currently selected TFTP server Inet Address type.
INTEGER (12)
INT rlDhcpClAutoConfigProtocol	1.3.6.1.4.1.89.76.22	INTEGER	read-write	Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
INT rlDhcpClAutoConfigStatus	1.3.6.1.4.1.89.76.21	INTEGER	read-only	Describes the status of current/last DHCP auto-config process.
INT rlDhcpClAutoUpdateProtocol	1.3.6.1.4.1.89.76.30	INTEGER	read-write	Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
INT rlDhcpClAutoUpdateStatus	1.3.6.1.4.1.89.76.18	INTEGER	read-only	Describes the status of current/last DHCP auto-update process.
INT rlDhcpClCommandAction	1.3.6.1.4.1.89.76.7.1.2	INTEGER	read-write	Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false.
INT rlDhcpClEnabledByDefaultRemovedIfindex	1.3.6.1.4.1.89.76.16	INTEGER	read-write	DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
INT rlDhcpClInformationDnsServerListPriority	1.3.6.1.4.1.89.76.28.1.2	INTEGER	not-accessible	The priority of the entry.
INT rlDhcpClInformationTftpServerListPriority	1.3.6.1.4.1.89.76.29.1.2	INTEGER	not-accessible	The priority of the entry.
INT rlDhcpClManualAutoConfigDataIndex	1.3.6.1.4.1.89.76.26.1.1	INTEGER	not-accessible	The index of this row. There is only one entry in this table, whose index is 1.
INT rlDhcpClOption67Enable	1.3.6.1.4.1.89.76.9	INTEGER	read-write	Defines whether the configuration file can be downloaded from DHCP packet option 67.
INT rlDhcpClSelectedConfigurationFileNameOrigin	1.3.6.1.4.1.89.76.15	INTEGER	read-only	The selected configuration files name origin.
INT rlDhcpClSelectedTftpServerAddressOrigin	1.3.6.1.4.1.89.76.12	INTEGER	read-only	Currently selected TFTP server IP Address's origin
InterfaceIndex (6)
NUM rlDhcpApprovalActionIfIndex	1.3.6.1.4.1.89.76.6.1.1	InterfaceIndex	read-only	IP interface ifIndex.
NUM rlDhcpApprovalWaitingIfIndex	1.3.6.1.4.1.89.76.5.1.1	InterfaceIndex	read-only	IP interface ifIndex.
NUM rlDhcpClActionIfIndex	1.3.6.1.4.1.89.76.3.1.1	InterfaceIndex	read-only	The interface which the action is implemented for or NULL if it implemented for all device.
NUM rlDhcpClInformationDnsServerListIfIndex	1.3.6.1.4.1.89.76.28.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationDnsServerListEntry.
NUM rlDhcpClInformationIfIndex	1.3.6.1.4.1.89.76.27.1.1	InterfaceIndex	read-only	The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
NUM rlDhcpClInformationTftpServerListIfIndex	1.3.6.1.4.1.89.76.29.1.1	InterfaceIndex	not-accessible	The IfIndex in rlDhcpClInformationTftpServerListEntry.
IpAddress (12)
IP rlDhcpApprovalActionAddress	1.3.6.1.4.1.89.76.6.1.2	IpAddress	read-only	IP Address.
IP rlDhcpApprovalActionMask	1.3.6.1.4.1.89.76.6.1.3	IpAddress	read-only	IP Address mask.
IP rlDhcpApprovalWaitingAddress	1.3.6.1.4.1.89.76.5.1.2	IpAddress	read-only	IP Address waiting for approval.
IP rlDhcpApprovalWaitingGateway	1.3.6.1.4.1.89.76.5.1.4	IpAddress	read-only	Default gateway of received address.
IP rlDhcpApprovalWaitingMask	1.3.6.1.4.1.89.76.5.1.3	IpAddress	read-only	Mask waiting for approval.
IP rlDhcpClInformationDefaultGateway	1.3.6.1.4.1.89.76.27.1.6	IpAddress	read-only	Default Gateway IP Address.
IP rlDhcpClInformationDnsServerListAddress	1.3.6.1.4.1.89.76.28.1.3	IpAddress	read-only	DNS server address received by DHCP client
IP rlDhcpClInformationIpAddress	1.3.6.1.4.1.89.76.27.1.2	IpAddress	read-only	IP Address allocated by DHCP server.
IP rlDhcpClInformationIpMask	1.3.6.1.4.1.89.76.27.1.3	IpAddress	read-only	IP Address mask allocated by DHCP server.
IP rlDhcpClInformationTftpServerListAddress	1.3.6.1.4.1.89.76.29.1.3	IpAddress	read-only	Tftp server address received by DHCP client
IP rlDhcpClManualTftpServerAddress	1.3.6.1.4.1.89.76.10	IpAddress	read-write	Manually configured TFTP server IP Address.
IP rlDhcpClSelectedTftpServerAddress	1.3.6.1.4.1.89.76.11	IpAddress	read-only	Currently selected TFTP server IP Address.
RowStatus (1)
ROW rlDhcpClActionStatus	1.3.6.1.4.1.89.76.3.1.2	RowStatus	read-create	The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
SnmpAdminString (2)
STR rlDhcpClActionHostName	1.3.6.1.4.1.89.76.3.1.3	SnmpAdminString	read-create	This option specifies the name of the client.
STR rlDhcpClInformationHostName	1.3.6.1.4.1.89.76.27.1.7	SnmpAdminString	read-only	Specifies the name of the client.
TruthValue (5)
T/F rlDhcpApprovalActionApprove	1.3.6.1.4.1.89.76.6.1.4	TruthValue	read-write	Approve or decline ip address.
T/F rlDhcpApprovalEnabled	1.3.6.1.4.1.89.76.4	TruthValue	read-only	DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
T/F rlDhcpClAutoConfigAutoSave	1.3.6.1.4.1.89.76.20	TruthValue	read-write	Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
T/F rlDhcpClAutoConfigForce	1.3.6.1.4.1.89.76.19	TruthValue	read-write	Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
T/F rlDhcpClAutoUpdateEnabled	1.3.6.1.4.1.89.76.17	TruthValue	read-write	Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
Unsigned32 (2)
U32 rlDhcpClInformationT1	1.3.6.1.4.1.89.76.27.1.4	Unsigned32	read-only	T1 timer value.
U32 rlDhcpClInformationT2	1.3.6.1.4.1.89.76.27.1.5	Unsigned32	read-only	T2 timer value.
No type (17)
rlDhcpApprovalActionEntry	1.3.6.1.4.1.89.76.6.1		not-accessible	An entry in rlDhcpApprovalActionTable.
rlDhcpApprovalActionTable	1.3.6.1.4.1.89.76.6		not-accessible	Action for waiting ip address (approve/decline).
rlDhcpApprovalWaitingEntry	1.3.6.1.4.1.89.76.5.1		not-accessible	An entry in rlDhcpApprovalWaitingTable.
rlDhcpApprovalWaitingTable	1.3.6.1.4.1.89.76.5		not-accessible	IP addresses waiting for approval.
rlDhcpCl	1.3.6.1.4.1.89.76			This private MIB module defines DHCP CL private MIBs.
rlDhcpClActionEntry	1.3.6.1.4.1.89.76.3.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
rlDhcpClActionTable	1.3.6.1.4.1.89.76.3		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
rlDhcpClCommandEntry	1.3.6.1.4.1.89.76.7.1		not-accessible	The row definition for this table.
rlDhcpClCommandTable	1.3.6.1.4.1.89.76.7		read-only	Action MIB for DHCP Renew command.
rlDhcpClInformationDnsServerListEntry	1.3.6.1.4.1.89.76.28.1		not-accessible	An entry in rlDhcpClInformationDnsServerListTable.
rlDhcpClInformationDnsServerListTable	1.3.6.1.4.1.89.76.28		not-accessible	The table saved the list of DNS servers received by DHCP client.
rlDhcpClInformationEntry	1.3.6.1.4.1.89.76.27.1		not-accessible	An entry (conceptual row) in dhcpClActionTable.
rlDhcpClInformationTable	1.3.6.1.4.1.89.76.27		not-accessible	The (conceptual) table mentione IP address which must be released/renewed on the interface.
rlDhcpClInformationTftpServerListEntry	1.3.6.1.4.1.89.76.29.1		not-accessible	An entry in rlDhcpClInformationTftpServerListTable.
rlDhcpClInformationTftpServerListTable	1.3.6.1.4.1.89.76.29		not-accessible	The table saved the list of Tftp servers received by DHCP client.
rlDhcpClManualAutoConfigDataEntry	1.3.6.1.4.1.89.76.26.1		not-accessible	An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
rlDhcpClManualAutoConfigDataTable	1.3.6.1.4.1.89.76.26		not-accessible	A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.

RFC description

Manages DHCP client operations on Dell VRTX systems including address renewal and release.

Start monitoring Dell PowerEdge VRTX chassis switch module (DHCP client, approval workflow) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-VRTX-DHCPCL-MIB

This MIB depends on

Related MIBs

What Is Dell-VRTX-DHCPCL-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description