DOCS-RPHY-MIB :: docsRphyRpdIpv6InterfaceIdentifier

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DOCS-RPHY-MIB › docsRphyRpdIpv6InterfaceIdentifier

docsRphyRpdIpv6InterfaceIdentifier

Module: DOCS-RPHY-MIB

OID (symbolic): DOCS-RPHY-MIB::docsRphyRpdIpv6InterfaceIdentifier

OID (numeric): 1.3.6.1.4.1.4491.2.1.30.1.3.4.1.1

Node type: OBJECT-TYPE

Type: Ipv6AddressIfIdentifierTC

Access: read-only

Description: The Interface Identifier for this interface. The Interface Identifier is combined with an address prefix to form an interface address.

By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached.

A zero length identifier may be used where appropriate.

What is docsRphyRpdIpv6InterfaceIdentifier?

Reports the IPv6 Interface Identifier used to form this interface's addresses in combination with a prefix, normally auto-configured based on the link type; it may be zero-length where appropriate. Operators use it to verify the interface identifier portion of an auto-configured IPv6 address matches expectations, for example when troubleshooting SLAAC on the RPD's management interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.30.1.3.4.1.1
snmpwalk -v2c -c public <target> DOCS-RPHY-MIB::docsRphyRpdIpv6InterfaceIdentifier

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.30.1.3.4.1.1.1
snmpget -v2c -c public <target> DOCS-RPHY-MIB::docsRphyRpdIpv6InterfaceIdentifier.1

Start monitoring DOCSIS Remote PHY Device (RPD), cable HFC access node (vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-RPHY-MIB::docsRphyRpdIpv6InterfaceIdentifier OID value, configure state conditions and alerts, and monitor any DOCSIS Remote PHY Device (RPD), cable HFC access node (vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.30docsRphyMibDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1docsRphyObjectsDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.3docsRphyRpdIpMibObjectsDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.3.4docsRphyRpdIpv6InterfaceTableDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.3.4.1docsRphyRpdIpv6InterfaceEntryDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.3.4.1.1docsRphyRpdIpv6InterfaceIdentifierDOCS-RPHY-MIB