DOCS-RPHY-MIB :: docsRphyRpdDevL2tpSessionInfoOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOCS-RPHY-MIBdocsRphyRpdDevL2tpSessionInfoOperStatus

docsRphyRpdDevL2tpSessionInfoOperStatus

Module: DOCS-RPHY-MIB

OID (symbolic): DOCS-RPHY-MIB::docsRphyRpdDevL2tpSessionInfoOperStatus

OID (numeric): 1.3.6.1.4.1.4491.2.1.30.1.1.8.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute provides the current status of the pseudowire from the point of view of the specific reporting entity (RPD). Values are as follows: 'other' indicates a vendor-specific operational status. 'up' indicates that the pseudowire is ready to pass packets. 'down' indicates that pseudowire signaling is not yet finished, or indications available at the service level indicate that the pseudowire is not passing packets. 'testing' indicates that AdminStatus at the pseudowire level is set to test. 'dormant' indicates that the pseudowire is not in a condition to pass packets but is in a 'pending' state, waiting for some external event. 'notPresent' indicates that some component is missing to accomplish the setup of the pseudowire. It can be a configuration error, incomplete configuration, or a missing H/W component. 'lowerLayerDown' indicates one or more of the lower-layer interfaces responsible for running the underlying PSN is not in OperStatus 'up' state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.30.1.1.8.1.19
snmpwalk -v2c -c public <target> DOCS-RPHY-MIB::docsRphyRpdDevL2tpSessionInfoOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.30.1.1.8.1.19.1
snmpget -v2c -c public <target> DOCS-RPHY-MIB::docsRphyRpdDevL2tpSessionInfoOperStatus.1

Start monitoring DOCSIS Remote PHY Device (RPD), cable HFC access node (vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-RPHY-MIB::docsRphyRpdDevL2tpSessionInfoOperStatus OID value, configure state conditions and alerts, and monitor any DOCSIS Remote PHY Device (RPD), cable HFC access node (vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.30docsRphyMibDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1docsRphyObjectsDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.1docsRphyRpdDevMibObjectsDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.1.8docsRphyRpdDevL2tpSessionInfoTableDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.1.8.1docsRphyRpdDevL2tpSessionInfoEntryDOCS-RPHY-MIB
1.3.6.1.4.1.4491.2.1.30.1.1.8.1.19docsRphyRpdDevL2tpSessionInfoOperStatusDOCS-RPHY-MIB