DOCS-QOS3-MIB :: docsQosServiceFlowPolicedDropPkts

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DOCS-QOS3-MIB › docsQosServiceFlowPolicedDropPkts

docsQosServiceFlowPolicedDropPkts

Module: DOCS-QOS3-MIB

OID (symbolic): DOCS-QOS3-MIB::docsQosServiceFlowPolicedDropPkts

OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.4.1.6

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: For outgoing service flows, this attribute counts the number of Packet Data PDUs classified to this service flow dropped due to: (1) exceeding the selected Buffer Size for the service flow; or

(2) UGS packets dropped due to exceeding the Unsolicited Grant Size with a Request/Transmission policy that requires such packets to be dropped.

Classified packets dropped due to other reasons must be counted in either AqmDroppedPkts or ifOutDiscards for the interface of this service flow (depending on the reason for the discard). This attribute reports 0 for incoming service flows.

This counter's last discontinuity is the ifCounterDiscontinuityTime for of the associated MAC Domain interface index.

What is docsQosServiceFlowPolicedDropPkts?

Counts outgoing packets on this service flow dropped either for exceeding the flow's configured buffer size, or (for UGS flows) for exceeding the unsolicited grant size when policy requires such packets to be dropped. Reports 0 for incoming service flows; other drop causes are counted separately under AqmDroppedPkts or ifOutDiscards.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.4.1.6
snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosServiceFlowPolicedDropPkts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.4.1.6.1
snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosServiceFlowPolicedDropPkts.1

Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosServiceFlowPolicedDropPkts OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1.21docsQos3MibCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.21.1docsQosMibObjectsDOCS-QOS3-MIB
1.3.6.1.4.1.4491.2.1.21.1.4docsQosServiceFlowStatsTableDOCS-QOS3-MIB
1.3.6.1.4.1.4491.2.1.21.1.4.1docsQosServiceFlowStatsEntryDOCS-QOS3-MIB
1.3.6.1.4.1.4491.2.1.21.1.4.1.6docsQosServiceFlowPolicedDropPktsDOCS-QOS3-MIB