All MIBs › DOCS-QOS3-MIB › docsQosServiceFlowParamSetTypeStatus
docsQosServiceFlowParamSetTypeStatus
Module: DOCS-QOS3-MIB
OID (symbolic): DOCS-QOS3-MIB::docsQosServiceFlowParamSetTypeStatus
OID (numeric): 1.3.6.1.4.1.4491.2.1.21.1.3.1.9
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This attribute represents the status of the service flow based on the admission state. 'active' bit set to '1' indicates that the service flow is active and that the corresponding QOS ParamSet is stored in the CMTS. 'admitted' bit set to '1' indicates that the service flow resources were reserved and that the corresponding QOS ParamSet is stored in the CMTS. 'provisioned' bit set to '1' indicates that the service flow was defined in the CM config file and that the corresponding QOS ParamSet is stored in the CMTS.
What is docsQosServiceFlowParamSetTypeStatus?
A bitmask showing which admission states apply to this service flow's QOS Parameter Set: 'active' means the flow is active and its parameter set is stored at the CMTS, 'admitted' means resources are reserved, and 'provisioned' means it came from the CM's config file. Admins can read this to see, for example, a flow that's 'provisioned' but not yet 'admitted' or 'active', indicating it hasn't been fully brought up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.3.1.9 snmpwalk -v2c -c public <target> DOCS-QOS3-MIB::docsQosServiceFlowParamSetTypeStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.21.1.3.1.9.1 snmpget -v2c -c public <target> DOCS-QOS3-MIB::docsQosServiceFlowParamSetTypeStatus.1
Start monitoring DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-QOS3-MIB::docsQosServiceFlowParamSetTypeStatus OID value, configure state conditions and alerts, and monitor any DOCSIS 3.0/3.1 cable modem/CMTS (QoS bonded-channel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.21 | docsQos3Mib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21.1 | docsQosMibObjects | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.3 | docsQosServiceFlowTable | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1 | docsQosServiceFlowEntry | DOCS-QOS3-MIB |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.9 | docsQosServiceFlowParamSetTypeStatus | DOCS-QOS3-MIB |