DNOS-ROUTE-POLICY-MIB :: fastpathRoutePolicyStmtSetDefaultIpNextHopDelList

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DNOS-ROUTE-POLICY-MIB › fastpathRoutePolicyStmtSetDefaultIpNextHopDelList

fastpathRoutePolicyStmtSetDefaultIpNextHopDelList

Module: DNOS-ROUTE-POLICY-MIB

OID (symbolic): DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtSetDefaultIpNextHopDelList

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The string containing a list of default next-hop IP addresses. Upto a maximum of 16 IP addresses can be specified.This MIB object is used to delete IP default next-hop list configured via fastpathRoutePolicyStmtSetDefaultIpNextHopList

What is fastpathRoutePolicyStmtSetDefaultIpNextHopDelList?

This field holds a string listing default next-hop IP addresses to remove from the list configured through fastpathRoutePolicyStmtSetDefaultIpNextHopList. It lets an admin remove one default next hop without reconfiguring the entire default-next-hop list. For example, setting it to "192.168.1.254" deletes that address from the statement's configured default next-hop list.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13
snmpwalk -v2c -c public <target> DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtSetDefaultIpNextHopDelList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13.1
snmpget -v2c -c public <target> DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtSetDefaultIpNextHopDelList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13.1 s <value>

Start monitoring Dell EMC Networking (DNOS/Force10) switch/router (route-map policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtSetDefaultIpNextHopDelList OID value, configure state conditions and alerts, and monitor any Dell EMC Networking (DNOS/Force10) switch/router (route-map policy) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2fastPathRoutingDNOS-ROUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20fastPathRoutePolicyDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2fastpathRoutePolicyStamentTableDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1fastpathRoutePolicyStatementEntryDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13fastpathRoutePolicyStmtSetDefaultIpNextHopDelListDNOS-ROUTE-POLICY-MIB