DNOS-ROUTE-POLICY-MIB :: fastpathRoutePolicyStmtMatchIpv4AclDelList

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › DNOS-ROUTE-POLICY-MIB › fastpathRoutePolicyStmtMatchIpv4AclDelList

fastpathRoutePolicyStmtMatchIpv4AclDelList

Module: DNOS-ROUTE-POLICY-MIB

OID (symbolic): DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The string containing a list of IPv4 ACLs. This list contains either IPV4 standard ACL/IPV4 extended ACL/ named IPv4 ACL. In a single match statement, up to a maximum of 16 IPV4 ACLs can be included.This list is used to delete already configured match list of IPv4 ACLs in route-map statement.Earlier this list should have configured through MIB object fastpathRoutePolicyStmtMatchIpv4AclList

What is fastpathRoutePolicyStmtMatchIpv4AclDelList?

This field holds a string listing IPv4 ACLs to remove from the match list previously configured through fastpathRoutePolicyStmtMatchIpv4AclList. Admins use it to prune specific ACLs out of a route-map statement's match criteria without reconfiguring the entire list. For example, setting it to "ACL-OLD-NETS" removes just that one ACL from an existing multi-ACL match list.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5
snmpwalk -v2c -c public <target> DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5.1
snmpget -v2c -c public <target> DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5.1 s <value>

Start monitoring Dell EMC Networking (DNOS/Force10) switch/router (route-map policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DNOS-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList OID value, configure state conditions and alerts, and monitor any Dell EMC Networking (DNOS/Force10) switch/router (route-map policy) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2fastPathRoutingDNOS-ROUTING-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20fastPathRoutePolicyDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2fastpathRoutePolicyStamentTableDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1fastpathRoutePolicyStatementEntryDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5fastpathRoutePolicyStmtMatchIpv4AclDelListDNOS-ROUTE-POLICY-MIB