DNOS-MVR-PRIVATE-MIB

All MIBs › DNOS-MVR-PRIVATE-MIB

Organization: Dell, Inc.

Last Updated: 2011-01-26

Category: Technology: Multicast, Technology: VLAN, Vendor: Dell/DNOS

Description: Manages Multicast VLAN Registration (MVR) for efficient multicast delivery across VLANs on Dell DNOS switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNOS-MVR-PRIVATE-MIB?

DNOS-MVR-PRIVATE-MIB is a Broadcom-authored private MIB, used within Dell's DNOS (Dell Networking OS) switch software, that manages Multicast VLAN Registration (MVR), a feature allowing a single multicast VLAN to be shared across multiple subscriber VLANs, commonly used for efficient IPTV/video distribution. It exposes configuration objects for enabling and tuning MVR groups, VLANs, and port roles (source/receiver) on the switch. As a feature-configuration MIB, its monitoring value is primarily around the software/configuration state of the multicast-forwarding feature, whether MVR is enabled, which VLAN and groups are configured, and which ports are acting as multicast sources versus receivers, rather than physical hardware health. It builds on standard multicast/IGMP snooping concepts and typically works alongside the switch's core IF-MIB and Q-BRIDGE-MIB for interface and VLAN context. It is deployed on Dell DNOS-based Ethernet switches distributing multicast video/IPTV traffic across VLANs in an enterprise or service-provider access network. Engineers can download the DNOS-MVR-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNOS-MVR-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell DNOS-based Ethernet switch

Monitoring Examples

No object or table names were included in the available source excerpt, so a specific polling scenario cannot be described with grounded object names; in general, an operator managing this feature would expect to check MVR enable/group/VLAN configuration objects to confirm that receiver ports are correctly mapped to the shared multicast VLAN, revealing misconfiguration if subscribers on a given port are not receiving expected multicast streams.

Imported Objects

From DELL-REF-MIB

dnOS	OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastpathMvr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50			The Broadcom Private MIB for MVR Configuration
mvrGlobalConfig	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1
T/F mvrAdminMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.1	TruthValue	read-write	Enable/Disable MVR. The value true(1) indicates that MVR is enabled A value of false(2) indicates that MVR is disabled.
INT mvrModeType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.2	INTEGER	read-write	Shows/Changes MVR mode. The value compatible(1) indicates that compatible mode is enabled. A value of dynamic(2) indicates that dynamic mode is enabled.
VLA mvrMulticastVlanId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.3	VlanIndex	read-write	Shows/Changes the Multicast Vlan number.
INT mvrMaxMulticastGroupsCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.4	INTEGER	read-only	The maximum number of multicast groups that is supported by MVR.
INT mvrCurrentMulticastGroupsCount	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.5	INTEGER	read-only	The current number of MVR groups allocated.
NUM mvrQueryTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.1.6	TimeInterval	read-write	Shows/Changes the MVR Query time, in centiseconds.
mvrPortTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2		not-accessible	A table of MVR control information about every bridge port. This is indexed by mvrBasePort.
mvrPortEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2.1		not-accessible	MVR control information for a bridge port.
T/F mvrPortMvrEnabled	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2.1.1	TruthValue	read-write	Enable\Disable MVR on port. The value true(1) indicates that MVR is enabled. A value of false(2) indicates that MVR is disabled.
INT mvrPortType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2.1.2	INTEGER	read-write	MVR Interface type.
T/F mvrPortImmediateLeaveMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2.1.3	TruthValue	read-write	Shows/Changes Immediate Leave mode for MVR port. The value true(1) indicates that the port is in Immediate Leave mode. A value of false(2) indicates that the port is not in Immediate Leave mode.
INT mvrPortStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.2.1.4	INTEGER	read-only	The interface status.
mvrGroupsTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.3		not-accessible	A table of MVR groups.
mvrGroupEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.3.1		not-accessible	MVR information of membership group.
IP mvrGroupIPAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.3.1.1	IpAddress	read-create	The multicast Group IP address.
INT mvrGroupStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.3.1.2	INTEGER	read-only	The status of the specific MVR group.
ROW mvrGroupRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.3.1.3	RowStatus	read-create	The status of this conceptual row.To create a row in this table, a manager must set this object to 'createAndGo'(4) .To delete a row in this table, a manager must set this object to `destroy'(6)
mvrPortMembershipTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.4		not-accessible	A table of MVR membership groups.
mvrPortMembershipEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.4.1		not-accessible	MVR information of membership group.
IP mvrPortMembershipGroupIPAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.4.1.1	IpAddress	read-create	The multicast Group IP address.
NUM mvrPortMembershipPortIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.4.1.2	InterfaceIndex	read-create	Interface index in 'ifTable'.
ROW mvrPortMembershipRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.4.1.3	RowStatus	read-create	The status of this conceptual row.To create a row in this table, a manager must set this object to 'createAndGo'(4) .To delete a row in this table, a manager must set this object to `destroy'(6)
mvrStatistics	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5
U32 mvrIGMPQueryReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.1	Unsigned32	read-only	Number of received IGMP Queries.
U32 mvrIGMPReportV1Received	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.2	Unsigned32	read-only	Number of received IGMP Reports V1.
U32 mvrIGMPReportV2Received	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.3	Unsigned32	read-only	Number of received IGMP Reports V1.
U32 mvrIGMPLeaveReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.4	Unsigned32	read-only	Number of received IGMP Leaves.
U32 mvrIGMPQueryTransmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.5	Unsigned32	read-only	Number of transmitted IGMP Queries.
U32 mvrIGMPReportV1Transmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.6	Unsigned32	read-only	Number of transmitted IGMP Reports V1.
U32 mvrIGMPReportV2Transmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.7	Unsigned32	read-only	Number of transmitted IGMP Reports V2.
U32 mvrIGMPLeaveTransmitted	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.8	Unsigned32	read-only	Number of transmitted IGMP Leaves.
U32 mvrIGMPPacketReceiveFailures	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.9	Unsigned32	read-only	Number of failures on receiving the IGMP packets.
U32 mvrIGMPPacketTransmitFailures	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.50.5.10	Unsigned32	read-only	Number of failures on transmitting the IGMP packets.

RFC description

Dell PowerConnect Multicast VLAN Registration configuration for MVR mode, multicast VLAN groups, and port membership.

Start monitoring Dell DNOS-based Ethernet switch (Multicast VLAN Registration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNOS-MVR-PRIVATE-MIB

What Is DNOS-MVR-PRIVATE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description