DMswitch-MIB

All MIBs › DMswitch-MIB

Organization: DATACOM

Last Updated: 2015-12-10

Category: Technology: Switching/L2, Technology: VLAN

Description: Manages configuration and operational status of DM-series managed Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DMswitch-MIB?

DMswitch-MIB is a vendor-specific MIB for managing DM-series managed Ethernet switches, covering per-unit configuration and operational status across the switching platform. It exposes a switchInfoTable with hardware and software inventory per unit, hardware version, boot loader version, firmware version, serial number, and product name, alongside port count and the unit's role in the system (standalone, master, or member in a multi-unit setup). Critically for monitoring, it surfaces swPowerStatus for power supply health and swFirmwareVer/swBootLoaderVer for software version tracking, letting an admin confirm a switch unit is powered correctly and running the expected firmware/bootloader revision. The MIB defines its own notifications (dmSwitchNotifications) and conformance statements, and like most switch vendor MIBs it is used alongside standard IF-MIB/BRIDGE-MIB for interface and bridging statistics that this module does not itself cover. It is deployed in networks using DM-series managed switches where centralized NMS tools track hardware inventory, firmware compliance, and power status across many units. Engineers can download the DMswitch-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DMswitch-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DM-series managed Ethernet switch
Datacom DmSwitch series (Brazilian carrier/access switches)

Monitoring Examples

Polling switchInfoTable/switchInfoEntry by swUnitIndex returns swHardwareVer, swBootLoaderVer, swFirmwareVer, swSerialNumber, and swProdName, letting an admin audit firmware version compliance across a fleet of switches and identify units still on an outdated swFirmwareVer. swPowerStatus can be checked to detect a unit reporting a power fault, and swRoleInSystem confirms whether a given unit is acting as master or member, revealing an unexpected role change after a failover. dmSwitchNotifications would fire traps for such status changes so the NMS doesn't need to continuously poll.

What Can Be Monitored

firmware/bootloader version per unit
hardware version and serial number
power supply status
switch role in system (master/member)
port count per unit

Imported Objects

From DATACOM-SMI

datacomAccessDevicesMIBs

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

PortList

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using countHoldPkts OID:

Select a Datacom DmSwitch series as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type countHoldPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the counter Hold shows the number of dropped packets in a single interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dmSwitchMIB	1.3.6.1.4.1.3709.3.5.201			The MIB module for DMswitch.
dmSwitchMIBObjects	1.3.6.1.4.1.3709.3.5.201.1
switchMgt	1.3.6.1.4.1.3709.3.5.201.1.1
I32 switchNumber	1.3.6.1.4.1.3709.3.5.201.1.1.1	Integer32	read-only	The total number of switches present on this system.
switchInfoTable	1.3.6.1.4.1.3709.3.5.201.1.1.2		not-accessible	Table of descriptive and status information about switches in this system.
switchInfoEntry	1.3.6.1.4.1.3709.3.5.201.1.1.2.1		not-accessible	An entry in the table, containing information about a single switch in this system.
I32 swUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1	Integer32	not-accessible	This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
INT swHardwareVer	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2	INTEGER	read-only	Hardware version of the main board.
STR swBootLoaderVer	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3	DisplayString	read-only	Loader version of the main board.
STR swFirmwareVer	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4	DisplayString	read-only	Operation code version of the main board.
I32 swPortNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5	Integer32	read-only	The total port number of this switch (including expansion slot).
INT swPowerStatus	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6	INTEGER	read-only	Indicates the switch using internalPower(1), redundantPower(2), internalAndRedundantPower(3) or externalPower(4)
INT swRoleInSystem	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7	INTEGER	read-only	Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.
STR swSerialNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8	DisplayString	read-only	Serial number of the switch.
STR swProdName	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9	DisplayString	read-only
INT swProdModelId	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10	INTEGER	read-only	Product model identifier.
STR swFirmwareReleaseDate	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11	DisplayString	read-only	Release date of the firmware.
INT swTemperature	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12	INTEGER	read-only	Temperature of the switch.
I32 swG704IntfNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13	Integer32	read-only	The number of G704 interfaces of this switch.
I32 swE1cIntfNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14	Integer32	read-only	The number of E1c interfaces of this switch.
I32 swBundleIntfNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15	Integer32	read-only	The number of Bundle interfaces of this switch.
I32 swPtpIntfNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16	Integer32	read-only	The number of PTP interfaces of this switch.
I32 swSdhIntfNumber	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17	Integer32	read-only	The number of SDH interfaces of this switch.
I32 swVC4Number	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18	Integer32	read-only	The number of VC4 interfaces of this switch.
I32 swVC12Number	1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19	Integer32	read-only	The number of VC12 interfaces of this switch.
switchProductId	1.3.6.1.4.1.3709.3.5.201.1.1.3
STR swProdManufacturer	1.3.6.1.4.1.3709.3.5.201.1.1.3.2	DisplayString	read-only
STR swProdDescription	1.3.6.1.4.1.3709.3.5.201.1.1.3.3	DisplayString	read-only
STR swProdUrl	1.3.6.1.4.1.3709.3.5.201.1.1.3.5	DisplayString	read-only
INT swIdentifier	1.3.6.1.4.1.3709.3.5.201.1.1.3.6	INTEGER	read-only	A unique identifier of which switch in the chassis is currently being looked at.
INT swVendorId	1.3.6.1.4.1.3709.3.5.201.1.1.3.7	INTEGER	read-only	Vendor information. The value 0 indicates a vendor not defined.
switchIndivPowerTable	1.3.6.1.4.1.3709.3.5.201.1.1.4		not-accessible	Table about status of individual powers.
switchIndivPowerEntry	1.3.6.1.4.1.3709.3.5.201.1.1.4.1		not-accessible	Table about status of individual powers.
I32 swIndivPowerUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1	Integer32	read-only	This is defined as swUnitIndex.
INT swIndivPowerIndex	1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2	INTEGER	read-only	1 means internal power. 2 means external power.
INT swIndivPowerStatus	1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3	INTEGER	read-only	notPresent(3) means not present. green(2) means up. red(1) means down.
switchIndivFanTable	1.3.6.1.4.1.3709.3.5.201.1.1.5		not-accessible	Table about status of individual fans.
switchIndivFanEntry	1.3.6.1.4.1.3709.3.5.201.1.1.5.1		not-accessible	Table about status of individual fans.
I32 swIndivFanUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1	Integer32	read-only	This is defined as swUnitIndex.
INT swIndivFanIndex	1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2	INTEGER	read-only
INT swIndivFanStatus	1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3	INTEGER	read-only	red(1) means down. green(2) means up.
switchIndivAlarmTable	1.3.6.1.4.1.3709.3.5.201.1.1.6		not-accessible	Table about status of individual alarms.
switchIndivAlarmEntry	1.3.6.1.4.1.3709.3.5.201.1.1.6.1		not-accessible	Table about status of individual alarms.
I32 swIndivAlarmUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1	Integer32	read-only	This is defined as swUnitIndex.
INT swIndivAlarmIndex	1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2	INTEGER	read-only
INT swIndivAlarmStatus	1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3	INTEGER	read-only
I32 switchResObj	1.3.6.1.4.1.3709.3.5.201.1.1.7	Integer32	read-write
STR swHashConfig	1.3.6.1.4.1.3709.3.5.201.1.1.8	DisplayString	read-only
STR swHashStatus	1.3.6.1.4.1.3709.3.5.201.1.1.9	DisplayString	read-only
I32 swCpuUsage	1.3.6.1.4.1.3709.3.5.201.1.1.10	Integer32	read-only	The CPU usage (in hundredths of a percent) at the last minute.
I32 swMemUsage	1.3.6.1.4.1.3709.3.5.201.1.1.11	Integer32	read-only	The memory usage (percentage).
switchMacAddrUsageTable	1.3.6.1.4.1.3709.3.5.201.1.1.12		not-accessible	Table about the total of used MAC addresses entries.
switchMacAddrUsageEntry	1.3.6.1.4.1.3709.3.5.201.1.1.12.1		not-accessible	Table about the total of used MAC addresses entries.
I32 swMacAddrUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1	Integer32	not-accessible	This is defined as swUnitIndex.
I32 swMacAddrUsageValue	1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2	Integer32	read-only	The total of used MAC addresses entries.
I32 swSlotNumber	1.3.6.1.4.1.3709.3.5.201.1.1.13	Integer32	read-only	The total number of interface board slots present on the device.
switchMpuTable	1.3.6.1.4.1.3709.3.5.201.1.1.14		not-accessible	Table of descriptive and status information about MPUs in this system.
switchMpuEntry	1.3.6.1.4.1.3709.3.5.201.1.1.14.1		not-accessible	An entry in the table, containing information about a single MPU in this system.
I32 swMpuIndex	1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1	Integer32	read-only	This object identifies the MPU within the system for which this entry contains information.
STR swMpuBootLoaderVer	1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2	DisplayString	read-only	Loader version of the main board.
INT swMpuRoleInSystem	1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3	INTEGER	read-only	Indicates the MPU is active(1) or standby(2) in this system.
STR swMpuSerialNumber	1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4	DisplayString	read-only	Serial number of the MPU.
INT swMpuModelId	1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5	INTEGER	read-only	MPU model identifier.
STR swHashHardware	1.3.6.1.4.1.3709.3.5.201.1.1.15	DisplayString	read-only
switchIndivAlarmOutTable	1.3.6.1.4.1.3709.3.5.201.1.1.16		not-accessible	Table about status of output alarms.
switchIndivAlarmOutEntry	1.3.6.1.4.1.3709.3.5.201.1.1.16.1		not-accessible	Table about status of output alarms.
I32 swIndivAlarmOutUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1	Integer32	read-only	This is defined as swUnitIndex.
INT swIndivAlarmOutStatus	1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2	INTEGER	read-only	Indicates current alarm output status, as configured in external-alarm-output.
INT swChassisModel	1.3.6.1.4.1.3709.3.5.201.1.1.17	INTEGER	read-only	Chassis model for equipment
switchSessionTable	1.3.6.1.4.1.3709.3.5.201.1.1.18		not-accessible	Table about CLI sessions informations.
switchSessionEntry	1.3.6.1.4.1.3709.3.5.201.1.1.18.1		not-accessible	An entry in the table, containing information about a single switch in this system.
I32 swSessionUnitIndex	1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1	Integer32	not-accessible	This is defined as swUnitIndex.
STR swSessionName	1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2	DisplayString	read-only	Session username.
STR swSessionUptime	1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3	DisplayString	read-only	Login time and date (uptime).
INT swSessionPid	1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4	INTEGER	read-only	CLI Session Process ID.
STR swSessionSrcIP	1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5	DisplayString	read-only	IP from process that called CLI - telnet, ssh or inetd.
portMgt	1.3.6.1.4.1.3709.3.5.201.1.2
portTable	1.3.6.1.4.1.3709.3.5.201.1.2.1		not-accessible	Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
portEntry	1.3.6.1.4.1.3709.3.5.201.1.2.1.1		not-accessible	An entry in the table, containing information about configuration in one switch port of the switch.
I32 portIndex	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1	Integer32	not-accessible	This is defined as ifIndex in the IF-MIB.
STR portName	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2	DisplayString	read-write	Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
INT portType	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3	INTEGER	read-only	Indicates the port type.
INT portSpeedDpxCfg	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4	INTEGER	read-write	Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode fullDuplex10000(8) - 10000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
INT portFlowCtrlCfg	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5	INTEGER	read-write	(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
BIT portCapabilities	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6	Bits	read-write	Port capabilities.
INT portAutonegotiation	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7	INTEGER	read-write	Whether autonegotiation is enabled.
INT portSpeedDpxStatus	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8	INTEGER	read-only	The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
INT portFlowCtrlStatus	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9	INTEGER	read-only	(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
INT portMdiStatus	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10	INTEGER	read-only
I32 portTrunkIndex	1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11	Integer32	read-only	The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPorts.
trunkMgt	1.3.6.1.4.1.3709.3.5.201.1.3
INT trunkMaxId	1.3.6.1.4.1.3709.3.5.201.1.3.1	INTEGER	read-only	The maximum number for a trunk identifier.
INT trunkValidNumber	1.3.6.1.4.1.3709.3.5.201.1.3.2	INTEGER	read-only	The number of valid trunks.
trunkTable	1.3.6.1.4.1.3709.3.5.201.1.3.3		not-accessible	Table of descriptive and status information about configuration of each trunk, similar to Cisco EtherChannel.
trunkEntry	1.3.6.1.4.1.3709.3.5.201.1.3.3.1		not-accessible	An entry in the table, containing information about configuration in one trunk of the switch.
I32 trunkIndex	1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1	Integer32	not-accessible	This object identifies the trunk within the switch for which this entry contains information.
POR trunkPorts	1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2	PortList	read-create	The complete set of ports currently associated with this trunk.
INT trunkCreation	1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3	INTEGER	read-only	A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.
INT trunkStatus	1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4	INTEGER	read-create	Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.
lacpMgt	1.3.6.1.4.1.3709.3.5.201.1.4
lacpPortTable	1.3.6.1.4.1.3709.3.5.201.1.4.1		not-accessible	Table for LACP port configuration.
lacpPortEntry	1.3.6.1.4.1.3709.3.5.201.1.4.1.1		not-accessible	Entry for LACP port configuration.
I32 lacpPortIndex	1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1	Integer32	not-accessible	This is defined as ifIndex in the IF-MIB.
INT lacpPortStatus	1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2	INTEGER	read-write	Whether 802.3ad LACP is enabled.
staMgt	1.3.6.1.4.1.3709.3.5.201.1.5
ENA staSystemStatus	1.3.6.1.4.1.3709.3.5.201.1.5.1	EnabledStatus	read-write	Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
staPortTable	1.3.6.1.4.1.3709.3.5.201.1.5.2		not-accessible	The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
staPortEntry	1.3.6.1.4.1.3709.3.5.201.1.5.2.1		not-accessible	The conceptual entry of staPortTable.
I32 staPortIndex	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1	Integer32	not-accessible	The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in the BRIDGE-MIB.
T/F staPortAdminEdgePort	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2	TruthValue	read-write	The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port.
T/F staPortOperEdgePort	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3	TruthValue	read-only	The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.
INT staPortAdminPointToPoint	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4	INTEGER	read-write	The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
T/F staPortOperPointToPoint	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5	TruthValue	read-only	The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object.
I32 staPortLongPathCost	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6	Integer32	read-write	The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated.
ENA staPortSystemStatus	1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7	EnabledStatus	read-write	Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
INT staProtocolType	1.3.6.1.4.1.3709.3.5.201.1.5.3	INTEGER	read-write	The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available.
tftpMgt	1.3.6.1.4.1.3709.3.5.201.1.6
STR tftpFile	1.3.6.1.4.1.3709.3.5.201.1.6.1	DisplayString	read-write	The file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
INT tftpFlashConfig	1.3.6.1.4.1.3709.3.5.201.1.6.2	INTEGER	read-write	Number of flash config partition for to be used when the chosen action is the downloadToFlashConfig or the uploadFromFlashConfig. This values is set to the zero when no flash config has been specified.
IP tftpServer	1.3.6.1.4.1.3709.3.5.201.1.6.3	IpAddress	read-write	The IP address of the TFTP server for transfer when a download or upload is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
INT tftpAction	1.3.6.1.4.1.3709.3.5.201.1.6.4	INTEGER	read-write	When this object is set to downloadToFlashConfig(1), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to flash-config(specified by tftpFlashConfig) in the device using the TFTP protocol. When this object is set to downloadToRunningConfig(2), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to running-config in the device using the TFTP protocol. When this object is set to downloadToStartupConfig(3), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to Startup-config in the device using the TFTP protocol. When this object is set to downloadToFirmware(4), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to firmware in the device using the TFTP protocol. When this object is set to uploadFromFlashConfig(5), the device will begin upload of the flash-config(specified by tftpFlashConfig) in the device to tftpFile in the server specified by tftpServer. When this object is set to uploadFromRunningConfig(6), the device will begin upload of the running-config in the device to tftpFile in the server specified by tftpServer. When this object is set to uploadFromStartupConfig(7), the device will begin upload of the startup-config in the device to tftpFile in the server specified by tftpServer. When the device is not downloading, this object will have a value of notDownloading(8).
restartMgt	1.3.6.1.4.1.3709.3.5.201.1.7
INT restartFirmware	1.3.6.1.4.1.3709.3.5.201.1.7.1	INTEGER	read-write	Number of firmware flash index for start-up.
INT restartConfig	1.3.6.1.4.1.3709.3.5.201.1.7.2	INTEGER	read-write	Number of configuration flash index for start-up.
INT restartControl	1.3.6.1.4.1.3709.3.5.201.1.7.3	INTEGER	read-write	Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
mirrorMgt	1.3.6.1.4.1.3709.3.5.201.1.8
I32 mirrorDestinationPort	1.3.6.1.4.1.3709.3.5.201.1.8.1	Integer32	read-write	Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB.
mirrorTable	1.3.6.1.4.1.3709.3.5.201.1.8.2		not-accessible	Table of descriptive and status information about switches in this system.
mirrorEntry	1.3.6.1.4.1.3709.3.5.201.1.8.2.1		not-accessible	An entry in the table, containing information about a single switch in this system.
I32 mirrorSourcePort	1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1	Integer32	not-accessible	Source port for mirrored packets. This is defined as ifIndex in the IF-MIB.
INT mirrorType	1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2	INTEGER	read-create	If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is all(3), all packts will be mirrored
igmpSnoopMgt	1.3.6.1.4.1.3709.3.5.201.1.9
INT igmpSnoopStatus	1.3.6.1.4.1.3709.3.5.201.1.9.1	INTEGER	read-write	Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports.
INT igmpSnoopQuerier	1.3.6.1.4.1.3709.3.5.201.1.9.2	INTEGER	read-write	Whether to act as querier.
INT igmpSnoopQueryCount	1.3.6.1.4.1.3709.3.5.201.1.9.3	INTEGER	read-write	Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports.
INT igmpSnoopQueryInterval	1.3.6.1.4.1.3709.3.5.201.1.9.4	INTEGER	read-write	Query interval.
INT igmpSnoopQueryMaxResponseTime	1.3.6.1.4.1.3709.3.5.201.1.9.5	INTEGER	read-write	Timeout value (seconds) between IGMP reports received on a port for an IP Multicast Address that can pass before the system sends an IGMP Query out the port and removes it from the list.
INT igmpSnoopQueryTimeout	1.3.6.1.4.1.3709.3.5.201.1.9.6	INTEGER	read-write	Query time-out.
INT igmpSnoopVersion	1.3.6.1.4.1.3709.3.5.201.1.9.7	INTEGER	read-write	Version.
igmpSnoopRouterCurrentTable	1.3.6.1.4.1.3709.3.5.201.1.9.8		not-accessible	Table for current router ports.
igmpSnoopRouterCurrentEntry	1.3.6.1.4.1.3709.3.5.201.1.9.8.1		not-accessible	Entry for current router ports.
U32 igmpSnoopRouterCurrentVlanIndex	1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1	Unsigned32	not-accessible	This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
POR igmpSnoopRouterCurrentPorts	1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2	PortList	read-only	The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable.
igmpSnoopRouterStaticTable	1.3.6.1.4.1.3709.3.5.201.1.9.9		not-accessible	Table for static router ports.
igmpSnoopRouterStaticEntry	1.3.6.1.4.1.3709.3.5.201.1.9.9.1		not-accessible	Entry for static router ports.
U32 igmpSnoopRouterStaticVlanIndex	1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1	Unsigned32	not-accessible	This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
POR igmpSnoopRouterStaticPorts	1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2	PortList	read-create	The set of ports which are static router ports.
igmpSnoopMulticastCurrentTable	1.3.6.1.4.1.3709.3.5.201.1.9.10		not-accessible	Table for current multicast addresses.
igmpSnoopMulticastCurrentEntry	1.3.6.1.4.1.3709.3.5.201.1.9.10.1		not-accessible	Entry for current multicast addresses.
U32 igmpSnoopMulticastCurrentVlanIndex	1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1	Unsigned32	not-accessible	This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
IP igmpSnoopMulticastCurrentIpAddress	1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2	IpAddress	not-accessible	IP address of multicast group.
POR igmpSnoopMulticastCurrentPorts	1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3	PortList	read-only	The set of ports which are members.
igmpSnoopMulticastStaticTable	1.3.6.1.4.1.3709.3.5.201.1.9.11		not-accessible	Table for static multicast addresses.
igmpSnoopMulticastStaticEntry	1.3.6.1.4.1.3709.3.5.201.1.9.11.1		not-accessible	Entry for static multicast addresses.
U32 igmpSnoopMulticastStaticVlanIndex	1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1	Unsigned32	not-accessible	This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
IP igmpSnoopMulticastStaticIpAddress	1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2	IpAddress	not-accessible	IP address of multicast group.
POR igmpSnoopMulticastStaticPorts	1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3	PortList	read-create	The set of ports which are static members.
ipMgt	1.3.6.1.4.1.3709.3.5.201.1.10
INT ipAddressMode	1.3.6.1.4.1.3709.3.5.201.1.10.1	INTEGER	read-write
IP ipDefaultGateway	1.3.6.1.4.1.3709.3.5.201.1.10.2	IpAddress	read-write	The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
IP ipPrimaryDnsServer	1.3.6.1.4.1.3709.3.5.201.1.10.3	IpAddress	read-write	The IP Address of the primary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0.
IP ipSecondaryDnsServer	1.3.6.1.4.1.3709.3.5.201.1.10.4	IpAddress	read-write	The IP Address of the secondary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0.
INT ipHttpState	1.3.6.1.4.1.3709.3.5.201.1.10.5	INTEGER	read-write	Whether HTTP is enabled.
INT ipHttpPort	1.3.6.1.4.1.3709.3.5.201.1.10.6	INTEGER	read-write	The port number for HTTP.
INT ipHttpsState	1.3.6.1.4.1.3709.3.5.201.1.10.7	INTEGER	read-write	Whether HTTPS is enabled.
INT ipHttpsPort	1.3.6.1.4.1.3709.3.5.201.1.10.8	INTEGER	read-write	The port number for HTTPS.
INT ipTelnetState	1.3.6.1.4.1.3709.3.5.201.1.10.9	INTEGER	read-write	Whether telnet is enabled.
bcastStormMgt	1.3.6.1.4.1.3709.3.5.201.1.11
bcastStormTable	1.3.6.1.4.1.3709.3.5.201.1.11.1		not-accessible	Table of descriptive and status information about configuration of each switch ports(including expansion slot) in this system.
bcastStormEntry	1.3.6.1.4.1.3709.3.5.201.1.11.1.1		not-accessible	An entry in the table, containing information about configuration in one switch port of the switch.
I32 bcastStormIfIndex	1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1	Integer32	not-accessible	This is defined as ifIndex in the IF-MIB.
INT bcastStormStatus	1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2	INTEGER	read-write	Whether broadcast storm protection is enabled.
INT bcastStormPacketRate	1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3	INTEGER	read-write	Broadcast storm threshold as packets per second.
vlanMgt	1.3.6.1.4.1.3709.3.5.201.1.12
vlanTable	1.3.6.1.4.1.3709.3.5.201.1.12.1		not-accessible	Table for VLAN configuration.
vlanEntry	1.3.6.1.4.1.3709.3.5.201.1.12.1.1		not-accessible	Entry for VLAN configuration.
U32 vlanIndex	1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1	Unsigned32	not-accessible	Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.
INT vlanAddressMethod	1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2	INTEGER	read-write	Method to get the IP address.
priorityMgt	1.3.6.1.4.1.3709.3.5.201.1.13
prioWrrTable	1.3.6.1.4.1.3709.3.5.201.1.13.1		not-accessible	Table for weighted round robin (WRR).
prioWrrEntry	1.3.6.1.4.1.3709.3.5.201.1.13.1.1		not-accessible	Entry for weighted round robin (WRR).
INT prioWrrTrafficClass	1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1	INTEGER	not-accessible	Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.
INT prioWrrWeight	1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2	INTEGER	read-write	Weight for this entry.
INT prioQueueMode	1.3.6.1.4.1.3709.3.5.201.1.13.2	INTEGER	read-write	The global status for the prioQueue. wrr(1),strict(2)
trapDestMgt	1.3.6.1.4.1.3709.3.5.201.1.14
trapDestTable	1.3.6.1.4.1.3709.3.5.201.1.14.1		not-accessible	A list of trap destination entries.
trapDestEntry	1.3.6.1.4.1.3709.3.5.201.1.14.1.1		not-accessible	This entry includes a destination IP address to which to send traps for this community.
IP trapDestAddress	1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1	IpAddress	not-accessible	The address to send traps.
OCT trapDestCommunity	1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2	OCTET STRING	read-create	A community to which this destination address belongs.
INT trapDestStatus	1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3	INTEGER	read-create	Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.
INT trapDestVersion	1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4	INTEGER	read-create	This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap.
trapVar	1.3.6.1.4.1.3709.3.5.201.1.14.2
INT trapForbiddenAccessMode	1.3.6.1.4.1.3709.3.5.201.1.14.2.1	INTEGER	accessible-for-notify	This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3), ssh(4).
I32 trapForbiddenAccessIp	1.3.6.1.4.1.3709.3.5.201.1.14.2.2	Integer32	accessible-for-notify	This variable is for trap var binding, indicating the IP address that rejected by the ipfilter.
STR trapLoginUserName	1.3.6.1.4.1.3709.3.5.201.1.14.2.3	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the name used by user to logging.
INT trapConfigSavePartition	1.3.6.1.4.1.3709.3.5.201.1.14.2.4	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the partition witch the config was saved.
INT trapSfpPresenceStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.5	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the presence status of a sfp connector.
INT trapInfAlarmVal	1.3.6.1.4.1.3709.3.5.201.1.14.2.6	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the alarm value. deactivated(1), actived(2), unstable(3).
INT trapDuplicatedIpVlan	1.3.6.1.4.1.3709.3.5.201.1.14.2.7	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the vlan witch the duplicated ip was detected.
I32 trapDuplicatedIpAddress	1.3.6.1.4.1.3709.3.5.201.1.14.2.8	Integer32	accessible-for-notify	This variable is for trap var binding, indicating the duplicated ip address.
MAC trapDuplicatedIpMacAddress	1.3.6.1.4.1.3709.3.5.201.1.14.2.9	MacAddress	accessible-for-notify	This variable is for trap var binding, indicating the mac address of the device that has the duplicated ip.
STR trapEapsDomainName	1.3.6.1.4.1.3709.3.5.201.1.14.2.10	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the eaps domain name.
INT trapEapsDomainId	1.3.6.1.4.1.3709.3.5.201.1.14.2.11	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the eaps domain identifier.
INT trapEapsStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.12	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the eaps status. idle(0), complete(1), failed(2), links-up(3), links-down(4), pre-forwarding(5).
INT trapTemperature	1.3.6.1.4.1.3709.3.5.201.1.14.2.13	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the temperature in degrees Celsius.
INT trapFuseId	1.3.6.1.4.1.3709.3.5.201.1.14.2.14	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the fuse indentifier.
INT trapFuseStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.15	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the fuse status. normal(1), failed(2).
INT trapFansBoardPresenceStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.16	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the presence status of the fans board.
INT trapStandbyMpuPresenceStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.17	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the presence status of the standby MPU.
MAC trapMacAddressMove	1.3.6.1.4.1.3709.3.5.201.1.14.2.18	MacAddress	accessible-for-notify	This variable is for trap var binding, indicating the MAC address of the device that has moved.
INT trapMemFree	1.3.6.1.4.1.3709.3.5.201.1.14.2.19	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the total memory free(in Kbytes).
STR trapBootloaderNew	1.3.6.1.4.1.3709.3.5.201.1.14.2.20	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the installed bootloader version.
INT trapDevNo	1.3.6.1.4.1.3709.3.5.201.1.14.2.21	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the Dev no of equipment.
INT trapDevLocalId	1.3.6.1.4.1.3709.3.5.201.1.14.2.22	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the Serial number of remote equipment.
INT trapCesopTdmStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.23	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of TDM interface.
INT trapCesopTdmRemoteStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.24	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of remote TDM interface.
INT trapCesopTdmCasStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.25	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of CAS TDM interface.
INT trapCesopTdmCrcStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.26	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of CRC TDM interface.
INT trapCesopBundleLocalTdmStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.27	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Local TDM in bundle interface.
INT trapCesopBundleRemoteTdmStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.28	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Remote TDM in bundle interface.
INT trapCesopBundleLocalStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.29	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Local bundle interface.
INT trapCesopBundleRemoteStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.30	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Remote bundle interface.
INT trapCesopBundlePktMismatchStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.31	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of packet mismatch in bundle interface.
INT trapCesopBundleNextHopStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.32	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Next Hop in bundle interface.
INT trapCesopClockAdapLinkQuality	1.3.6.1.4.1.3709.3.5.201.1.14.2.33	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the Adaptative link quality of clock interface.
INT trapCesopClockSourceStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.34	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of Clock Source interface.
INT trapBroadcastStormControlStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.35	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of broadcsat storm control at this interface.
INT trapBroadcastStormControlPPS	1.3.6.1.4.1.3709.3.5.201.1.14.2.36	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the current average count of broadcast packets per second at this interface.
INT trapMulticastStormControlStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.37	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of multicsat storm control at this interface.
INT trapMulticastStormControlPPS	1.3.6.1.4.1.3709.3.5.201.1.14.2.38	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the current average count of multicast packets per second at this interface.
INT trapStatusLDP	1.3.6.1.4.1.3709.3.5.201.1.14.2.39	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of condition the protocol LDP.
INT trapIdLDP	1.3.6.1.4.1.3709.3.5.201.1.14.2.40	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the entity identification the protocol LDP.
INT trapStatusTunnelRSVP	1.3.6.1.4.1.3709.3.5.201.1.14.2.41	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of condition tunnel on protocol RSVP.
INT trapIdTunnelRSVP	1.3.6.1.4.1.3709.3.5.201.1.14.2.42	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the entity identification the tunnel on protocol RSVP.
INT trapPanelStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.43	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the panel status. closed(1), open(2)
INT trapLSTGroup	1.3.6.1.4.1.3709.3.5.201.1.14.2.44	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the Link-state Tracking Group.
INT trapMemL3Free	1.3.6.1.4.1.3709.3.5.201.1.14.2.45	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the total L3 memory free(in Kbytes).
INT trapActiveMpuNsfId	1.3.6.1.4.1.3709.3.5.201.1.14.2.46	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the active mpu nsf-id.
INT trapStandByMpuNsfId	1.3.6.1.4.1.3709.3.5.201.1.14.2.47	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the standby mpu nsf-id.
STR trapErpsDomainName	1.3.6.1.4.1.3709.3.5.201.1.14.2.48	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the erps domain name.
INT trapErpsDomainId	1.3.6.1.4.1.3709.3.5.201.1.14.2.49	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the erps domain identifier.
INT trapErpsStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.50	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the erps status. init(1), idle(2), protection(3).
STR trapCfmMdName	1.3.6.1.4.1.3709.3.5.201.1.14.2.51	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the Maintenance Domain (MD) name that originated the trap.
STR trapCfmMaName	1.3.6.1.4.1.3709.3.5.201.1.14.2.52	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the Maintenance Association (MA) name that originated the trap.
INT trapCfmMepId	1.3.6.1.4.1.3709.3.5.201.1.14.2.53	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the Maintenance End Point ID (MEPID) that originated the trap.
INT trapCfmVlan	1.3.6.1.4.1.3709.3.5.201.1.14.2.54	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the VLAN that originated the trap.
INT trapCfmDefect	1.3.6.1.4.1.3709.3.5.201.1.14.2.55	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the defect condition being notified . defNone(0), defRDICCM(1), defMACstatus(2), defRemoteCCM(3), defErrorCCM(4), defXconCCM(5).
STR trapEvcName	1.3.6.1.4.1.3709.3.5.201.1.14.2.56	DisplayString	accessible-for-notify	This variable is for trap var binding, indicating the EVC name.
INT trapEvcStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.57	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of EVC being notified, notActive(0), newAndNotActive(1), active(2), newAndActive(3), partiallyActive(4), newAndPartiallyActive(5).
INT trapSyncSystemClockStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.58	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of system clock
INT trapCesopG704ClockSourceStatus	1.3.6.1.4.1.3709.3.5.201.1.14.2.59	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the status of g704 clock source.
INT trapSystemWarningsUnits	1.3.6.1.4.1.3709.3.5.201.1.14.2.60	INTEGER	accessible-for-notify	This variable is for trap var binding, indicating the system warnings units.
INT trapSensorGroup	1.3.6.1.4.1.3709.3.5.201.1.14.2.61	INTEGER	accessible-for-notify	This variable indicates the sensor's type informed in notification.
rateLimitMgt	1.3.6.1.4.1.3709.3.5.201.1.16
rateLimitPortTable	1.3.6.1.4.1.3709.3.5.201.1.16.1		not-accessible	Table for rate limit of each port.
rateLimitPortEntry	1.3.6.1.4.1.3709.3.5.201.1.16.1.1		not-accessible	Entry for rate limit of each port.
I32 rlPortIndex	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1	Integer32	not-accessible	The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
INT rlPortInputStatus	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2	INTEGER	read-write	Whether input rate limit is enabled for this port.
INT rlPortOutputStatus	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3	INTEGER	read-write	Whether output rate limit is enabled for this port.
I32 rlPortInputRate	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4	Integer32	read-write	Rate-limit in kilobits per second. Must be multiple of 64.
I32 rlPortInputBurst	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5	Integer32	read-write	Maximum burst size in kilobits. Must be power of 2.
I32 rlPortOutputRate	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6	Integer32	read-write	Rate-limit in kilobits per second. Must be multiple of 64.
I32 rlPortOutputBurst	1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7	Integer32	read-write	Maximum burst size in kilobits. Must be power of 2.
securityMgt	1.3.6.1.4.1.3709.3.5.201.1.17
radiusMgt	1.3.6.1.4.1.3709.3.5.201.1.17.1
INT radiusServerPortNumber	1.3.6.1.4.1.3709.3.5.201.1.17.1.2	INTEGER	read-write	IP port number of RADIUS server.
STR radiusServerKey	1.3.6.1.4.1.3709.3.5.201.1.17.1.3	DisplayString	read-write	Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters.
INT radiusServerRetransmit	1.3.6.1.4.1.3709.3.5.201.1.17.1.4	INTEGER	read-write	Maximum number of retransmissions for RADIUS.
INT radiusServerTimeout	1.3.6.1.4.1.3709.3.5.201.1.17.1.5	INTEGER	read-write	Timeout for RADIUS.
radiusMultipleServerTable	1.3.6.1.4.1.3709.3.5.201.1.17.1.7		not-accessible	The table for multiple RADIUS server.
radiusMultipleServerEntry	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1		not-accessible	The conceptual row for radiusMultipleServerTable.
I32 radiusMultipleServerIndex	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1	Integer32	not-accessible	The RADIUS multiple server index.
IP radiusMultipleServerAddress	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2	IpAddress	read-create	IP address of a multiple RADIUS server. IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleServerStatus to valid.
I32 radiusMultipleServerPortNumber	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3	Integer32	read-create	IP port number of a multiple RADIUS server.
STR radiusMultipleServerKey	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4	DisplayString	read-write	Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters.
INT radiusMultipleServerRetransmit	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5	INTEGER	read-write	Maximum number of retransmissions for RADIUS.
INT radiusMultipleServerTimeout	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6	INTEGER	read-write	Timeout for RADIUS.
VAL radiusMultipleServerStatus	1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
sshMgt	1.3.6.1.4.1.3709.3.5.201.1.17.2
ENA sshServerStatus	1.3.6.1.4.1.3709.3.5.201.1.17.2.1	EnabledStatus	read-write	The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server.
I32 sshServerMajorVersion	1.3.6.1.4.1.3709.3.5.201.1.17.2.2	Integer32	read-only	The major version of the SSH Server.
I32 sshServerMinorVersion	1.3.6.1.4.1.3709.3.5.201.1.17.2.3	Integer32	read-only	The minor version of the SSH Server.
INT sshTimeout	1.3.6.1.4.1.3709.3.5.201.1.17.2.4	INTEGER	read-write	The time interval that the router waits for the SSH client to respond. The range is 1-120.
INT sshKeySize	1.3.6.1.4.1.3709.3.5.201.1.17.2.5	INTEGER	read-write	The SSH server key size.
KEY sshRsaHostKey	1.3.6.1.4.1.3709.3.5.201.1.17.2.6	KeySegment	read-only	The RSA host key.
KEY sshDsaHostKey	1.3.6.1.4.1.3709.3.5.201.1.17.2.7	KeySegment	read-only	The DSA host key.
INT sshHostKeyGenAction	1.3.6.1.4.1.3709.3.5.201.1.17.2.8	INTEGER	read-write	This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1).
INT sshHostKeyDelAction	1.3.6.1.4.1.3709.3.5.201.1.17.2.9	INTEGER	read-write	To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
ipFilterMgt	1.3.6.1.4.1.3709.3.5.201.1.17.3
ipFilterSnmpTable	1.3.6.1.4.1.3709.3.5.201.1.17.3.1		not-accessible	A list of IP address entries.
ipFilterSnmpEntry	1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1		not-accessible	This entry includes an IP address range which the system will allow to connect to this device through SNMP.
IP ipFilterSnmpAddress	1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1	IpAddress	not-accessible	The start IP address.
IP ipFilterSnmpMask	1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2	IpAddress	not-accessible	The IP mask.
VAL ipFilterSnmpStatus	1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
ipFilterHTTPTable	1.3.6.1.4.1.3709.3.5.201.1.17.3.2		not-accessible	A list of IP address entries.
ipFilterHTTPEntry	1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1		not-accessible	This entry includes an IP address range which the system will allow to connect to this device through SNMP.
IP ipFilterHTTPAddress	1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1	IpAddress	not-accessible	The start IP address.
IP ipFilterHTTPMask	1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2	IpAddress	not-accessible	The IP mask.
VAL ipFilterHTTPStatus	1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
ipFilterTelnetTable	1.3.6.1.4.1.3709.3.5.201.1.17.3.3		not-accessible	A list of IP address entries.
ipFilterTelnetEntry	1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1		not-accessible	This entry includes an IP address range which the system will allow them to connect to this device through SNMP.
IP ipFilterTelnetAddress	1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1	IpAddress	not-accessible	The start IP address.
IP ipFilterTelnetMask	1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2	IpAddress	not-accessible	The IP mask.
VAL ipFilterTelnetStatus	1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
ipFilterSSHTable	1.3.6.1.4.1.3709.3.5.201.1.17.3.4		not-accessible	A list of IP address entries.
ipFilterSSHEntry	1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1		not-accessible	This entry includes an IP address range which the system will allow them to connect to this device through SNMP.
IP ipFilterSSHAddress	1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1	IpAddress	not-accessible	The start IP address.
IP ipFilterSSHMask	1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2	IpAddress	not-accessible	The IP mask.
VAL ipFilterSSHStatus	1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
sysLogMgt	1.3.6.1.4.1.3709.3.5.201.1.19
INT sysLogStatus	1.3.6.1.4.1.3709.3.5.201.1.19.1	INTEGER	read-write	Whether system log is enabled.
INT sysLogHistoryFlashLevel	1.3.6.1.4.1.3709.3.5.201.1.19.2	INTEGER	read-write	Severity level for logging to flash.
INT sysLogHistoryRamLevel	1.3.6.1.4.1.3709.3.5.201.1.19.3	INTEGER	read-write	Severity level for logging to RAM.
remoteLogMgt	1.3.6.1.4.1.3709.3.5.201.1.19.6
ENA remoteLogStatus	1.3.6.1.4.1.3709.3.5.201.1.19.6.1	EnabledStatus	read-write	Whether the remote log system is enabled.
I32 remoteLogLevel	1.3.6.1.4.1.3709.3.5.201.1.19.6.2	Integer32	read-write	Severity level for remote log.
INT remoteLogFacilityType	1.3.6.1.4.1.3709.3.5.201.1.19.6.3	INTEGER	read-write	The FacilityType for remote log.
remoteLogServerTable	1.3.6.1.4.1.3709.3.5.201.1.19.6.4		not-accessible	A Table for storing the remote log Server list.
remoteLogServerEntry	1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1		not-accessible	A conceptually row for remoteLogServerTable.
IP remoteLogServerIp	1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1	IpAddress	read-create	The IP address of the remote log Server.
VAL remoteLogServerStatus	1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
sysTimeMgt	1.3.6.1.4.1.3709.3.5.201.1.20
sntpMgt	1.3.6.1.4.1.3709.3.5.201.1.20.1
INT sntpStatus	1.3.6.1.4.1.3709.3.5.201.1.20.1.1	INTEGER	read-write	Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP.
I32 sntpPollInterval	1.3.6.1.4.1.3709.3.5.201.1.20.1.2	Integer32	read-write	Polling interval.
sntpServerTable	1.3.6.1.4.1.3709.3.5.201.1.20.1.3		not-accessible	Table for SNTP servers
sntpServerEntry	1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1		not-accessible	Entry for SNTP servers.
IP sntpServerIp	1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1	IpAddress	read-create	The IP address of a server.
VAL sntpServerStatus	1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2	ValidStatus	read-create	Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
STR sysCurrentTime	1.3.6.1.4.1.3709.3.5.201.1.20.2	DisplayString	read-write	It is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by the space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'.
STR sysTimeZone	1.3.6.1.4.1.3709.3.5.201.1.20.3	DisplayString	read-write	It is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero.
STR sysTimeZoneName	1.3.6.1.4.1.3709.3.5.201.1.20.4	DisplayString	read-write	The name of the time zone.
fileMgt	1.3.6.1.4.1.3709.3.5.201.1.21
fileInfoTable	1.3.6.1.4.1.3709.3.5.201.1.21.1		not-accessible	This table contain the information of the file system; we can also perform the delete, set startup file operation.
fileInfoEntry	1.3.6.1.4.1.3709.3.5.201.1.21.1.1		not-accessible	A conceptually row for fileInfoTable.
I32 fileInfoUnitID	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1	Integer32	not-accessible	The switch unit in a stacking system, in a non-stacking system, this value is always 1.
I32 fileInfoFileIndex	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2	Integer32	not-accessible
I32 fileInfoFlashId	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3	Integer32	read-only
STR fileInfoFileName	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4	DisplayString	read-only	The file Name of the file System in the device.
INT fileInfoFileType	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5	INTEGER	read-only	The file type of the file System in the device.
T/F fileInfoIsStartUp	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6	TruthValue	read-write	This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation.
I32 fileInfoFileSize	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7	Integer32	read-only	The sizes (in bytes) of the file.
STR fileInfoCreationTime	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8	DisplayString	read-only	The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'.
INT fileInfoDelete	1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9	INTEGER	read-write	Write this object to delete(2) to delete a file, when read, this always return noDelete(1).
countMgt	1.3.6.1.4.1.3709.3.5.201.1.22
countHoldPktsTable	1.3.6.1.4.1.3709.3.5.201.1.22.1		not-accessible	Table of dropped packets counters by interface for QoS statistics.
countHoldPktsEntry	1.3.6.1.4.1.3709.3.5.201.1.22.1.1		not-accessible	An entry in the table, containing the number of dropped packets in a single interface.
I32 interfaceNumber	1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1	Integer32	read-only	Interface Number from dropped packets.
C64 countHoldPktsEx	1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2	Counter64	read-only	Counter Hold shows the number of dropped packets in a single interface.
filterCounterMgt	1.3.6.1.4.1.3709.3.5.201.1.23
filterCounterInfoTable	1.3.6.1.4.1.3709.3.5.201.1.23.1		not-accessible	This table contain the description about counters, so they can be used to measure performance from user-based filters.
filterCounterInfoEntry	1.3.6.1.4.1.3709.3.5.201.1.23.1.1		not-accessible	A conceptually row for filterCounterInfoTable.
I32 filterCounterInfoIndex	1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1	Integer32	read-only	Index for counter, matches current CLI information
STR filterCounterInfoRemark	1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2	DisplayString	read-only	Remark is a textual description, as configured by user.
filterCounterValueTable	1.3.6.1.4.1.3709.3.5.201.1.23.2		not-accessible	This table contains current values for filter counters.
filterCounterValueEntry	1.3.6.1.4.1.3709.3.5.201.1.23.2.1		not-accessible	A conceptually row for filterCounterValueTable.
I32 filterCounterValueIndex	1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1	Integer32	read-only	Subcounters index identifies each internal counter that a user-editable counter can have. Internal counters may differ from equipament model to other.
C64 filterCounterValue	1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2	Counter64	read-only	The total number of data which matches internal subcounter. It can be bytes or packets, according to equipment configuration. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times.
eapsMgt	1.3.6.1.4.1.3709.3.5.201.1.24
eapsInfoTable	1.3.6.1.4.1.3709.3.5.201.1.24.1		not-accessible	This table contains EAPS information about all EAPS domains on this device.
eapsInfoEntry	1.3.6.1.4.1.3709.3.5.201.1.24.1.1		not-accessible	An individual entry of this table contains EAPS information related to that EAPS domain.
INT eapsInfoId	1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1	INTEGER	read-only	This indicates the mode of the EAPS Id.
STR eapsInfoName	1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2	DisplayString	read-only	The EAPS domain name.
INT eapsInfoMode	1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3	INTEGER	read-only	This indicates the mode of the EAPS domain.
INT eapsInfoState	1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4	INTEGER	read-only	This indicates the current EAPS state of this EAPS domain.
cfmProbeMgmt	1.3.6.1.4.1.3709.3.5.201.1.25
cfmProbeDmTable	1.3.6.1.4.1.3709.3.5.201.1.25.1		not-accessible	This table contains CFM delay measurements informationS.
cfmProbeDmEntry	1.3.6.1.4.1.3709.3.5.201.1.25.1.1		not-accessible	An individual entry of this table contains CFM delay measurements information related to that probe.
INT cfmProbeDmIndex	1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1	INTEGER	read-only	The index value used to identify the probe.
I32 cfmProbeDmAvgDelay	1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2	Integer32	read-only	The average delay in microseconds of CFM delay measurement.
I32 cfmProbeDmAvgJitter	1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3	Integer32	read-only	The average jitter in microseconds of CFM delay measurement.
INT cfmProbeDmLoss	1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4	INTEGER	read-only	The percentage of CFM frames lost on the indicate probe.
cpumonMgmt	1.3.6.1.4.1.3709.3.5.201.1.26
cpuActiveUsageTable	1.3.6.1.4.1.3709.3.5.201.1.26.1		not-accessible	Table of cpu usage.
cpuActiveUsageEntry	1.3.6.1.4.1.3709.3.5.201.1.26.1.1		not-accessible	Table of cpu usage.
I32 cpuActiveUsageIndex	1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1	Integer32	not-accessible	This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
I32 cpuActiveUsageValue	1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2	Integer32	read-only	The CPU usage (in hundredths of a percent).
memActiveUsageTable	1.3.6.1.4.1.3709.3.5.201.1.26.2		not-accessible	Table of memory usage.
memActiveUsageEntry	1.3.6.1.4.1.3709.3.5.201.1.26.2.1		not-accessible	Table of memory usage.
I32 memActiveUsageIndex	1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1	Integer32	not-accessible	This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
I32 memActiveUsageValue	1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2	Integer32	read-only	The memory usage (percentage).
cpuStandbyUsageTable	1.3.6.1.4.1.3709.3.5.201.1.26.3		not-accessible	Table of cpu usage.
cpuStandbyUsageEntry	1.3.6.1.4.1.3709.3.5.201.1.26.3.1		not-accessible	Table of cpu usage.
I32 cpuStandbyUsageIndex	1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1	Integer32	not-accessible	This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
I32 cpuStandbyUsageValue	1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2	Integer32	read-only	The CPU usage (in hundredths of a percent).
memStandbyUsageTable	1.3.6.1.4.1.3709.3.5.201.1.26.4		not-accessible	Table of memory usage.
memStandbyUsageEntry	1.3.6.1.4.1.3709.3.5.201.1.26.4.1		not-accessible	Table of memory usage.
I32 memStandbyUsageIndex	1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1	Integer32	not-accessible	This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
I32 memStandbyUsageValue	1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2	Integer32	read-only	The memory usage (percentage).
queuePortMgmt	1.3.6.1.4.1.3709.3.5.201.1.27
queuePortTable	1.3.6.1.4.1.3709.3.5.201.1.27.1		not-accessible	Table for statistics of interface queues.
queuePortEntry	1.3.6.1.4.1.3709.3.5.201.1.27.1.1		not-accessible	An entry in the table, containing information about configuration in one switch port of the switch.
I32 queuePortIfIndex	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1	Integer32	not-accessible	This is defined as ifIndex in the IF-MIB.
I32 queuePortQueueIndex	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2	Integer32	not-accessible	The COS queue from the interface.
C64 queuePortSentPackets	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3	Counter64	read-only	Counter of sent packets.
C64 queuePortSentBytes	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4	Counter64	read-only	Counter of sent bytes.
C64 queuePortDroppedPackets	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5	Counter64	read-only	Counter of dropped packets.
C64 queuePortDroppedBytes	1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6	Counter64	read-only	Counter of dropped bytes.
ddTransceiversMgmt	1.3.6.1.4.1.3709.3.5.201.1.28
ddTransceiversTable	1.3.6.1.4.1.3709.3.5.201.1.28.1		not-accessible	Transceivers digital diagnostic table.
ddTransceiversEntry	1.3.6.1.4.1.3709.3.5.201.1.28.1.1		not-accessible	An entry in the table, containing information about digital diagnostic.
I32 ddTransceiversIfIndex	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1	Integer32	not-accessible	This is defined as ifIndex in the IF-MIB.
STR ddTransceiversTemperature	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2	DisplayString	read-only	Transceiver temperature information in Celsius
STR ddTransceiversVcc3v3	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3	DisplayString	read-only	Transceiver Vcc 3v3 information in Volts
STR ddTransceiversRxPower	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4	DisplayString	read-only	Transceiver rx power information in Decibels
STR ddTransceiversTxPower	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5	DisplayString	read-only	Transceiver tx power information in Decibels
STR ddTransceiversTxBias	1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6	DisplayString	read-only	Transceiver tx bias information in Amperes
dmSwitchNotifications	1.3.6.1.4.1.3709.3.5.201.2
dmSwitchTraps	1.3.6.1.4.1.3709.3.5.201.2.1
dmSwitchTrapsPrefix	1.3.6.1.4.1.3709.3.5.201.2.1.0
NTF swLoginFailTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40001			This trap is sent when an user try logging with a incorrect username or password.
NTF swLoginSucessTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40002			This trap is sent when an user get logging.
NTF swStackAttachTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40003			This trap is sent when a device is attached in stack.
NTF swStackDetachTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40004			This trap is sent when a device is detached from stack.
NTF swForbiddenAccessTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40005			This trap is sent when an incorrect IP address is rejected by the ipfilter.
NTF swSfpPresenceTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40006			This trap is sent when a sfp conector is taken off or placed.
NTF swConfigChangeTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40007			This trap is sent when the device's config change.
NTF swConfigSaveTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40008			This trap is sent when the device's config is saved.
NTF swFanStatusChangeTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40009			This trap is sent when the status of one fan changes.
NTF swTrapsLostTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40010			This trap is sent when one or more traps are discarded.
NTF swPowerStatusChangeTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40011			This trap is sent when the status of one PSU changes.
NTF swAlarmTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40012			This trap is sent when the status of one alarm changes.
NTF swDuplicatedIp	1.3.6.1.4.1.3709.3.5.201.2.1.0.40013			This trap is sent when a duplicate ip is detected.
NTF swLoopbackOnPortDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40014			This trap is sent when a loopback on port is detected.
NTF swLoopbackOnPortNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40015			This trap is sent when a loopback on port is no more detected.
NTF swUnidirLinkDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40016			This trap is sent when a unidirectional link on port is detected.
NTF swUnidirLinkRecovered	1.3.6.1.4.1.3709.3.5.201.2.1.0.40017			This trap is sent when a unidirectional link on port is recovered.
NTF swCriticalEventDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40018			This trap is sent when a critical event on port is detected.
NTF swCriticalEventRecovered	1.3.6.1.4.1.3709.3.5.201.2.1.0.40019			This trap is sent when a critical event on port is recovered.
NTF swLinkFlapDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40020			This trap is sent when a link-flap on port is detected.
NTF swLinkFlapNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40021			This trap is sent when a link-flap on port is no more detected.
NTF swEapsStatusChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40022			This trap is sent when the eaps status change.
NTF swPortSecurityViolation	1.3.6.1.4.1.3709.3.5.201.2.1.0.40023			This trap is sent when a port-security violation happens.
NTF swHighTemperatureDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40024			This trap is sent when a high temperature is detected.
NTF swHighTemperatureNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40025			This trap is sent when a high temperature is no more detected.
NTF swFuseStatusChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40026			This trap is sent when the status of on fuse changes.
NTF swFansBoardPresenceTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40027			This trap is sent when the fans board is taken off or placed.
NTF swStandbyMpuTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40028			This trap is sent when the standby MPU is taken off or placed.
NTF swNonHomologSfpTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40029			This trap is sent when a non-homologated SFP is placed.
NTF swHighCpuUsageDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40030			This trap is sent when the CPU utilization is greater than 90%.
NTF swHighCpuUsageNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40031			This trap is sent when the CPU utilization is lower than 90%.
NTF swDuplicatedMac	1.3.6.1.4.1.3709.3.5.201.2.1.0.40032			This trap is sent when a MAC address move is detected.
NTF swHighMemoryUsageDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40033			This trap is sent when the memory utilization is critical.
NTF swHighMemoryUsageNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40034			This trap is sent when the memory utilization is normal.
NTF swNewBootloaderVersion	1.3.6.1.4.1.3709.3.5.201.2.1.0.40035			This trap is sent when a new bootloader version is saved.
NTF swCesopTdmStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40036			This trap is sent when TDM status change.
NTF swCesopTdmRemoteStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40037			This trap is sent when TDM Remote status change (RALM).
NTF swCesopTdmCasStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40038			This trap is sent when TDM Cas status change (LOM).
NTF swCesopTdmCrcStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40039			This trap is sent when TDM CRC status change (CRC).
NTF swCesopBundleLocalTdmStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40040			This trap is sent when Bundle Local TDM status change.
NTF swCesopBundleRemoteTdmStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40041			This trap is sent when Bundle Remote TDM status change.
NTF swCesopBundleLocalStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40042			This trap is sent when Bundle Local status change.
NTF swCesopBundleRemoteStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40043			This trap is sent when Bundle Remote status change.
NTF swCesopBundlePktMismatchTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40044			This trap is sent when Packet mismatch status chanege in Bundle Interface.
NTF swCesopBundleNextHopTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40045			This trap is sent when Packet mismatch status chanege in Bundle Interface.
NTF swCesopClockAdapLinkQualityTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40046			This trap is sent when Adaptative link quality change in clock source interface.
NTF swCesopClockSourceTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40047			This trap is sent when Source clock status change.
NTF swRemoteDeviceReady	1.3.6.1.4.1.3709.3.5.201.2.1.0.40048			This trap is sent when a remote device becomes ready to be managed.
NTF swRemoteDeviceLost	1.3.6.1.4.1.3709.3.5.201.2.1.0.40049			This trap is sent when a remote device is no longer manageable.
NTF swRemoteDeviceConfigFail	1.3.6.1.4.1.3709.3.5.201.2.1.0.40050			This trap is sent when the configuration sent to a remote device is rejected.
NTF swRemoteDeviceConfigForced	1.3.6.1.4.1.3709.3.5.201.2.1.0.40051			This trap is sent when a remote device configuration is forced.
NTF swFanFuseStatusChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40052			This trap is sent when the fan board fuse change its status.
NTF swDyingGaspPackReceived	1.3.6.1.4.1.3709.3.5.201.2.1.0.40053			This trap is sent every time an OAM:Dying Gasp package is received on port
NTF swBroadcastStormCheckChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40054			This trap is sent when a broadcast storm threshold is hit or recovers.
NTF swMulticastStormCheckChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40055			This trap is sent when a multicast storm threshold is hit or recovers.
NTF swBpduProtectLimit	1.3.6.1.4.1.3709.3.5.201.2.1.0.40056			This trap is sent when a BPDU limit has reached.
NTF swChangeStatusLDP	1.3.6.1.4.1.3709.3.5.201.2.1.0.40057			This trap is sent when occurs one change on status the protocol LDP.
NTF swChangeStatusTunnelRSVP	1.3.6.1.4.1.3709.3.5.201.2.1.0.40058			This trap is sent when occurs one change on status the tunnels of protocol RSVP.
NTF swBpduProtect	1.3.6.1.4.1.3709.3.5.201.2.1.0.40059			This trap is sent when a BPDU protect block time expired.
NTF swRouteTableFull	1.3.6.1.4.1.3709.3.5.201.2.1.0.40060			This trap is sent when L3 Routing Table reaches its limits.
NTF swPanelStatusTrap	1.3.6.1.4.1.3709.3.5.201.2.1.0.40061			This trap is sent when the Panel status change.
NTF swLSTGroupLinkStatusDown	1.3.6.1.4.1.3709.3.5.201.2.1.0.40062			This trap is sent when a link-state tracking group is down
NTF swLSTGroupLinkStatusUp	1.3.6.1.4.1.3709.3.5.201.2.1.0.40063			This trap is sent when a link-state tracking group is up
NTF swHighCpuL3UsageDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40064			This trap is sent when the CPU L3 utilization is greater than 90%.
NTF swHighCpuL3UsageNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40065			This trap is sent when the CPU L3 utilization is lower than 90%.
NTF swHighMemoryL3UsageDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40066			This trap is sent when the L3 memory utilization is critical.
NTF swHighMemoryL3UsageNoMoreDetected	1.3.6.1.4.1.3709.3.5.201.2.1.0.40067			This trap is sent when the L3 memory utilization is normal.
NTF swMpuNsfIdDiffers	1.3.6.1.4.1.3709.3.5.201.2.1.0.40068			This trap is sent when the active and standby mpu nsf-id differs.
NTF swErpsStatusChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40069			This trap is sent when the erps status change.
NTF swCfmDefect	1.3.6.1.4.1.3709.3.5.201.2.1.0.40070			This trap is sent when some CFM MEP enters or leave an error state.
NTF swLldpRemoteChange	1.3.6.1.4.1.3709.3.5.201.2.1.0.40071			This trap is sent when LLDP remote table changes.
NTF swPoeOverCurrent	1.3.6.1.4.1.3709.3.5.201.2.1.0.40072			This trap is sent when a Power over Ethernet enabled port was shut down due an overcurrent.
NTF swPoePowerRestriction	1.3.6.1.4.1.3709.3.5.201.2.1.0.40073			This trap is sent when an Power over Ethernet enabled port was shut down because the connected device announced an power consumption over the configured for the port.
NTF swCoreDump	1.3.6.1.4.1.3709.3.5.201.2.1.0.40074			This trap is sent when an application terminate abnormally and generates a core dump.
NTF swElmiEvcStatus	1.3.6.1.4.1.3709.3.5.201.2.1.0.40075			This trap is sent when an EVC changes its state.
NTF swSyncSystemClockSwitchHier	1.3.6.1.4.1.3709.3.5.201.2.1.0.40076			This trap is sent when system changes active clock synchronize hierarchy
NTF swSyncSystemClockStatus	1.3.6.1.4.1.3709.3.5.201.2.1.0.40077			This trap is sent when system clock changes its status
NTF swHostTableFull	1.3.6.1.4.1.3709.3.5.201.2.1.0.40078			This trap is sent when L3 Host Table reaches its limits.
NTF swSyncG704ClockStatus	1.3.6.1.4.1.3709.3.5.201.2.1.0.40079			This trap is sent when g704 clock source changes its status.
NTF swSystemWarningsUnits	1.3.6.1.4.1.3709.3.5.201.2.1.0.40080			This trap is sent when warnings in the system units are found.
NTF swRebootDueToOvertemp	1.3.6.1.4.1.3709.3.5.201.2.1.0.40081			This trap is sent when the device reboots due to overheat.
dmSwitchConformance	1.3.6.1.4.1.3709.3.5.201.3

RFC description

Datacom DMswitch management including port, VLAN, and spanning tree configuration.

Start monitoring Datacom DmSwitch series with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DMswitch-MIB