DMswitch-MIB :: igmpSnoopQueryInterval

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DMswitch-MIB › igmpSnoopQueryInterval

igmpSnoopQueryInterval

Module: DMswitch-MIB

OID (symbolic): DMswitch-MIB::igmpSnoopQueryInterval

OID (numeric): 1.3.6.1.4.1.3709.3.5.201.1.9.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Query interval.

What is igmpSnoopQueryInterval?

The interval in seconds (60..125, default 125) between IGMP general queries sent by the switch acting as querier. An admin shortens this to make multicast group membership converge faster after topology changes, at the cost of slightly more query traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3709.3.5.201.1.9.4
snmpwalk -v2c -c public <target> DMswitch-MIB::igmpSnoopQueryInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3709.3.5.201.1.9.4.1
snmpget -v2c -c public <target> DMswitch-MIB::igmpSnoopQueryInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3709.3.5.201.1.9.4.1 i <value>

Start monitoring Datacom DmSwitch series with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DMswitch-MIB::igmpSnoopQueryInterval OID value, configure state conditions and alerts, and monitor any Datacom DmSwitch series from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3709datacomDATACOM-SMI
1.3.6.1.4.1.3709.3datacomProductsMIBsDATACOM-SMI
1.3.6.1.4.1.3709.3.5datacomAccessDevicesMIBsDATACOM-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3709.3.5.201dmSwitchMIBDMswitch-MIB
1.3.6.1.4.1.3709.3.5.201.1dmSwitchMIBObjectsDMswitch-MIB
1.3.6.1.4.1.3709.3.5.201.1.9igmpSnoopMgtDMswitch-MIB
1.3.6.1.4.1.3709.3.5.201.1.9.4igmpSnoopQueryIntervalDMswitch-MIB