DLINK-MCB-MIB

All MIBs › DLINK-MCB-MIB

Category: Vendor: D-Link

Description: Manages Multi-Configuration Bank (MCB) features for storing and switching between device configurations on D-Link switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-MCB-MIB?

The DLINK-MCB-MIB is a D-Link proprietary MIB for the Multi-Configuration Bank (MCB) feature, used on D-Link media-converter chassis systems to manage multiple stored configurations and to monitor the health of the chassis and its media-converter modules. It exposes hardware/software/BIOS revision information for the administrator module, media-converter family and chassis identity, and a set of trap definitions covering power supply failure, fan failure, module plug-in/pull-out, link state changes, and active-slot changes. This MIB is squarely aimed at hardware and fault monitoring—power supply and fan health, module presence/insertion state, link up/down/broken conditions, and active-slot redundancy switchover—making it a fault-management-focused module for chassis-based media converter systems. It is a standalone D-Link enterprise MIB without notable dependency on external standard MIBs. It is typically deployed on D-Link media converter chassis (MC series) used to extend fiber/copper Ethernet links in campus or industrial networks, where DLINK-MCB-MIB SNMP monitoring flags power, fan, and module faults quickly.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-MCB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link media converter chassis (MC series)

Monitoring Examples

An administrator would subscribe to mcbSNMPTrapPowerFail and mcbSNMPTrapFanFail to be alerted immediately of a power supply or cooling fan failure in the media converter chassis, and to mcbSNMPTrapMCPlugin/mcbSNMPTrapMCPullout to detect a media-converter module being inserted or removed unexpectedly. mcbSNMPTrapMCLinkDown/mcbSNMPTrapMCLinkBroken flag a failed fiber or copper link on a converter module, while mcbAdministratorHardwareRev/mcbAdministratorSoftwareRev/mcbAdministratorBiosRev let staff audit firmware versions across a fleet of chassis for update compliance.

What Can Be Monitored

power supply failure
fan failure
module plug-in/pull-out events
link up/down/broken state
active slot redundancy status
hardware/software/BIOS revision

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
company	1.3.6.1.4.1.171
mcbAdministrator	1.3.6.1.4.1.171.41.1.2
STR mcbAdministratorBiosRev	1.3.6.1.4.1.171.41.1.2.3	DisplayString	read-only	Bios Revision
INT mcbAdministratorFactoryReset	1.3.6.1.4.1.171.41.1.2.4	INTEGER	read-write	Administratoristrator Factory Reset The Whole Chassis
INT mcbAdministratorFactoryResetCPU	1.3.6.1.4.1.171.41.1.2.5	INTEGER	read-write	Administratoristrator Factory Reset Only CPU
STR mcbAdministratorHardwareRev	1.3.6.1.4.1.171.41.1.2.1	DisplayString	read-only	Hardware Revision
INT mcbAdministratorSoftwareReboot	1.3.6.1.4.1.171.41.1.2.6	INTEGER	read-write	System Software Reboot
STR mcbAdministratorSoftwareRev	1.3.6.1.4.1.171.41.1.2.2	DisplayString	read-only	Software Revision
NTF mcbFanOneFail	1.3.6.1.4.1.171.41.1.0.2			A FanFail trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration
NTF mcbFanTwoFail	1.3.6.1.4.1.171.41.1.0.4			A FanFail trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration
INT mcbFrameFanOneFailStatus	1.3.6.1.4.1.171.41.1.3.5	INTEGER	read-only	Main Fan Fail Status
INT mcbFrameFanTwoFailStatus	1.3.6.1.4.1.171.41.1.3.6	INTEGER	read-only	Redundent Fan Fail Status
INT mcbFramePowerOneFailStatus	1.3.6.1.4.1.171.41.1.3.3	INTEGER	read-only	Main Power Fail Status
INT mcbFramePowerOneOnStatus	1.3.6.1.4.1.171.41.1.3.1	INTEGER	read-only	Main Power On Status
INT mcbFramePowerTwoFailStatus	1.3.6.1.4.1.171.41.1.3.4	INTEGER	read-only	Redundent Power Fail Status
INT mcbFramePowerTwoOnStatus	1.3.6.1.4.1.171.41.1.3.2	INTEGER	read-only	Redundent Power On Status
NTF mcbMCActiveSlotChange	1.3.6.1.4.1.171.41.1.0.13			A Active Slot Change trap signifies that the sending protocol entity checks if the active slot of the redundant group is changed
NTF mcbMCActiveSlotLose	1.3.6.1.4.1.171.41.1.0.14			A Active Slot Lose trap signifies that the sending protocol entity checks if the active slot of the redundant group is lost
INT mcbMCEnable	1.3.6.1.4.1.171.41.1.4.2.1.13	INTEGER	read-write	Enable or Disable the smart Media Converter
INT mcbMCEnableMediaOne	1.3.6.1.4.1.171.41.1.4.2.1.15	INTEGER	read-write	Enable the media one of the smart Media Converter
INT mcbMCEnableMediaTwo	1.3.6.1.4.1.171.41.1.4.2.1.16	INTEGER	read-write	Enable the media two of the smart Media Converter
mcbMCFrame	1.3.6.1.4.1.171.41.1.3
NTF mcbMCMediaOneBroken	1.3.6.1.4.1.171.41.1.0.11			A Media Converter Media One Broken trap signifies that the sending protocol entity checks if the media one of the specified media converter in the slot was broken
INT mcbMCMediaOneBrokenStatus	1.3.6.1.4.1.171.41.1.4.2.1.27	INTEGER	read-only	Media One Broken Status of the smart Media Converter
INT mcbMCMediaOneDupStatus	1.3.6.1.4.1.171.41.1.4.2.1.8	INTEGER	read-only	Media One Duplex Status
NTF mcbMCMediaOneLinkDown	1.3.6.1.4.1.171.41.1.0.7			A Media Converter Media One Link Down trap signifies that the sending protocol entity checks if the media one of the specified media converter in the slot links down
INT mcbMCMediaOneLinkStatus	1.3.6.1.4.1.171.41.1.4.2.1.6	INTEGER	read-only	Media One Link Status
NTF mcbMCMediaOneLinkUp	1.3.6.1.4.1.171.41.1.0.9			A Media Converter Media One Link Up trap signifies that the sending protocol entity checks if the media one of the specified media converter in the slot links up
CTR mcbMCMediaOneRxPacketCount	1.3.6.1.4.1.171.41.1.4.2.1.30	Counter	read-only	Media One receiving packet count of the smart Media Converter
INT mcbMCMediaOneSpeedStatus	1.3.6.1.4.1.171.41.1.4.2.1.10	INTEGER	read-only	Media One Speed Status
CTR mcbMCMediaOneTxPacketCount	1.3.6.1.4.1.171.41.1.4.2.1.29	Counter	read-only	Media One transmitting packet count of the smart Media Converter
INT mcbMCMediaOneType	1.3.6.1.4.1.171.41.1.4.2.1.4	INTEGER	read-only	Media Type Is TP Or Fiber
NTF mcbMCMediaTwoBroken	1.3.6.1.4.1.171.41.1.0.12			A Media Converter Media Two Broken trap signifies that the sending protocol entity checks if the media two of the specified media converter in the slot was broken
INT mcbMCMediaTwoBrokenStatus	1.3.6.1.4.1.171.41.1.4.2.1.28	INTEGER	read-only	Media Two Broken Status of the smart Media Converter
INT mcbMCMediaTwoDupStatus	1.3.6.1.4.1.171.41.1.4.2.1.9	INTEGER	read-only	Media Two Duplex Status
NTF mcbMCMediaTwoLinkDown	1.3.6.1.4.1.171.41.1.0.8			A Media Converter Media Two Link Down trap signifies that the sending protocol entity checks if the media two of the specified media converter in the slot links down
INT mcbMCMediaTwoLinkStatus	1.3.6.1.4.1.171.41.1.4.2.1.7	INTEGER	read-only	Media Two Link Status
NTF mcbMCMediaTwoLinkUp	1.3.6.1.4.1.171.41.1.0.10			A Media Converter Media Two Link Up trap signifies that the sending protocol entity checks if the media two of the specified media converter in the slot links up
CTR mcbMCMediaTwoRxPacketCount	1.3.6.1.4.1.171.41.1.4.2.1.32	Counter	read-only	Media Two receiving packet count of the smart Media Converter
INT mcbMCMediaTwoSpeedStatus	1.3.6.1.4.1.171.41.1.4.2.1.11	INTEGER	read-only	Media Two Speed Status
CTR mcbMCMediaTwoTxPacketCount	1.3.6.1.4.1.171.41.1.4.2.1.31	Counter	read-only	Media Two transmitting packet count of the smart Media Converter
INT mcbMCMediaTwoType	1.3.6.1.4.1.171.41.1.4.2.1.5	INTEGER	read-only	Media Type Is TP Or Fiber
STR mcbMCModelName	1.3.6.1.4.1.171.41.1.4.2.1.3	DisplayString	read-only	Each Media Converter Device Relative Model Name
INT mcbMCRedundantGroupActiveSlot	1.3.6.1.4.1.171.41.1.5.2.1.5	INTEGER	read-only	The active link slot member of the Redundant Group
INT mcbMCRedundantGroupCount	1.3.6.1.4.1.171.41.1.5.1	INTEGER	read-only	The Number Of Redundant Groups.
INT mcbMCRedundantGroupEnable	1.3.6.1.4.1.171.41.1.5.2.1.4	INTEGER	read-write	Enable or Disable the Redundant Group
mcbMCRedundantGroupEntry	1.3.6.1.4.1.171.41.1.5.2.1		not-accessible	Each Redundant Group Relative Entry
INT mcbMCRedundantGroupNo	1.3.6.1.4.1.171.41.1.5.2.1.1	INTEGER	read-only	Each Redundant Group Relative Number On One Base
INT mcbMCRedundantGroupPrimarySlot	1.3.6.1.4.1.171.41.1.5.2.1.2	INTEGER	read-only	The primary slot member of the Redundant Group
INT mcbMCRedundantGroupRestart	1.3.6.1.4.1.171.41.1.5.2.1.6	INTEGER	read-write	Restart the Redundant Group
mcbMCRedundantGroups	1.3.6.1.4.1.171.41.1.5
INT mcbMCRedundantGroupSecondarySlot	1.3.6.1.4.1.171.41.1.5.2.1.3	INTEGER	read-only	The secondary slot member of the Redundant Group
mcbMCRedundantGroupTable	1.3.6.1.4.1.171.41.1.5.2		not-accessible	Each Redundant Group Relative Table
INT mcbMCSetLLCF	1.3.6.1.4.1.171.41.1.4.2.1.14	INTEGER	read-write	Enable or Disable the LLCF of the smart Media Converter
INT mcbMCSetMediaOneAutoNegotiate	1.3.6.1.4.1.171.41.1.4.2.1.17	INTEGER	read-write	Set the Auto Negotiation mode or the Force mode of the media one of the smart Media Converter
INT mcbMCSetMediaOneDuplex	1.3.6.1.4.1.171.41.1.4.2.1.21	INTEGER	read-write	Set the duplex in Force mode of the media one of the smart Media Converter
INT mcbMCSetMediaOneFlowControl	1.3.6.1.4.1.171.41.1.4.2.1.23	INTEGER	read-write	Set the flow control in Force mode of the media one of the smart Media Converter
INT mcbMCSetMediaOneLLR	1.3.6.1.4.1.171.41.1.4.2.1.25	INTEGER	read-write	Set the LLR of the media one of the smart Media Converter
INT mcbMCSetMediaOneSpeed	1.3.6.1.4.1.171.41.1.4.2.1.19	INTEGER	read-write	Set the speed in Force mode of the media one of the smart Media Converter
INT mcbMCSetMediaTwoAutoNegotiate	1.3.6.1.4.1.171.41.1.4.2.1.18	INTEGER	read-write	Set the Auto Negotiation mode or the Force mode of the media two of the smart Media Converter
INT mcbMCSetMediaTwoDuplex	1.3.6.1.4.1.171.41.1.4.2.1.22	INTEGER	read-write	Set the duplex in Force mode of the media two of the smart Media Converter
INT mcbMCSetMediaTwoFlowControl	1.3.6.1.4.1.171.41.1.4.2.1.24	INTEGER	read-write	Set the flow control in Force mode of the media two of the smart Media Converter
INT mcbMCSetMediaTwoLLR	1.3.6.1.4.1.171.41.1.4.2.1.26	INTEGER	read-write	Set the LLR of the media two of the smart Media Converter
INT mcbMCSetMediaTwoSpeed	1.3.6.1.4.1.171.41.1.4.2.1.20	INTEGER	read-write	Set the speed in Force mode of the media two of the smart Media Converter
INT mcbMCSlotCount	1.3.6.1.4.1.171.41.1.4.1	INTEGER	read-only	The Number Of Media Converters.
mcbMCSlotEntry	1.3.6.1.4.1.171.41.1.4.2.1		not-accessible	Each Media Converter Device Relative Entry
INT mcbMCSlotExist	1.3.6.1.4.1.171.41.1.4.2.1.2	INTEGER	read-only	Each Device of Slot Is Exist Or Not
STR mcbMCSlotName	1.3.6.1.4.1.171.41.1.4.2.1.12	DisplayString	read-write	Each Media Converter Chassis Slot Name
INT mcbMCSlotNo	1.3.6.1.4.1.171.41.1.4.2.1.1	INTEGER	read-only	Each Media Converter Device Relative Number On One Base
mcbMCSlots	1.3.6.1.4.1.171.41.1.4
mcbMCSlotTable	1.3.6.1.4.1.171.41.1.4.2		not-accessible	Each Media Converter Device Relative Table
mcbMediaConverterChassis	1.3.6.1.4.1.171.41.1
mcbMediaConverterFamily	1.3.6.1.4.1.171.41
NTF mcbMediaConverterPlugin	1.3.6.1.4.1.171.41.1.0.5			A Media Converter Plugin trap signifies that the sending protocol entity checks if the model is pluged in the slot
NTF mcbMediaConverterPullout	1.3.6.1.4.1.171.41.1.0.6			A Media Converter Pullout trap signifies that the sending protocol entity checks if the model is pull out from the slot
NTF mcbPowerOneFail	1.3.6.1.4.1.171.41.1.0.1			A PowerFail trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration
NTF mcbPowerTwoFail	1.3.6.1.4.1.171.41.1.0.3			A PowerFail trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration
mcbSNMPMIB	1.3.6.1.4.1.171.41.1.1
INT mcbSNMPTrapFanFail	1.3.6.1.4.1.171.41.1.1.2	INTEGER	read-write	Fan Fail Trap
INT mcbSNMPTrapMCActiveSlotChange	1.3.6.1.4.1.171.41.1.1.8	INTEGER	read-write	A active slot change Trap
INT mcbSNMPTrapMCActiveSlotLose	1.3.6.1.4.1.171.41.1.1.9	INTEGER	read-write	A active slot Lose Trap
INT mcbSNMPTrapMCLinkBroken	1.3.6.1.4.1.171.41.1.1.7	INTEGER	read-write	Media Converter Link Broken Trap
INT mcbSNMPTrapMCLinkDown	1.3.6.1.4.1.171.41.1.1.5	INTEGER	read-write	Media Converter Link Down Trap
INT mcbSNMPTrapMCLinkUp	1.3.6.1.4.1.171.41.1.1.6	INTEGER	read-write	Media Converter Link Up Trap
INT mcbSNMPTrapMCPlugin	1.3.6.1.4.1.171.41.1.1.3	INTEGER	read-write	Media Converter Plugin Trap
INT mcbSNMPTrapMCPullout	1.3.6.1.4.1.171.41.1.1.4	INTEGER	read-write	Media Converter Pullout Trap
INT mcbSNMPTrapPowerFail	1.3.6.1.4.1.171.41.1.1.1	INTEGER	read-write	Power Fail Trap

RFC description

D-Link media converter chassis management for frame, slot, and redundancy configuration.

Start monitoring D-Link media converter chassis (MC series, Multi-Configuration Bank) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-MCB-MIB

What Is DLINK-MCB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description