All MIBs › DLINK-3100-rlBrgMulticast-MIB
Category: Technology: Bridging, Technology: Multicast, Vendor: D-Link
Description: Manages multicast bridging and forwarding table entries for Layer 2 multicast on D-Link 3100 series switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DLINK-3100-rlBrgMulticast-MIB?
This is a D-Link proprietary MIB for the 3100 series switches covering Layer 2 multicast bridging, specifically IGMP/MLD snooping and MAC multicast forwarding control. It exposes configuration and status data such as whether MAC multicast bridging and IGMP snooping are enabled, aging timers for hosts and routers, per-VLAN IGMP version, and tables of active multicast groups and their member ports. For monitoring hardware/software status, it lets an operator confirm the multicast-snooping feature is actually running and healthy; checking the membership table shows whether expected multicast streams (e.g., IPTV) are being properly pruned to only the ports that joined, and an empty or stale table can reveal a snooping or aging-timer misconfiguration. It is a vendor-private extension that builds on the standard bridge/IGMP snooping concepts found in IETF's BRIDGE-MIB and IGMP-STD-MIB rather than directly importing them. It is used on D-Link 3100 series switches deployed in networks running IPTV, video conferencing, or other multicast-heavy applications where efficient Layer 2 multicast pruning matters, and administrators can download the DLINK-3100-rlBrgMulticast-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-rlBrgMulticast-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link 3100 series managed switch
Monitoring Examples
An admin can check rlIgmpSnoopEnable and rlMacMulticastEnable to confirm snooping is active, then walk rlIgmpSnoopMembershipTable to see which ports have joined which multicast groups. The rlIgmpSnoopMulticastTvTable/rlIgmpSnoopMulticastTvEntry rows (indexed by rlIgmpSnoopMulticastTvVID and rlIgmpSnoopMulticastTvGroup) show configured multicast TV channel-to-VLAN mappings and their rlIgmpSnoopMulticastTvStatus, letting an admin verify a channel is correctly provisioned. Unexpectedly long entries in the membership table combined with a very high rlIgmpSnoopHostAgingTime could indicate stale joins that are flooding multicast traffic to ports that no longer want it.
What Can Be Monitored
- IGMP/MLD snooping enable state
- MAC multicast bridging enable state
- multicast group membership per port/VLAN
- host/router aging timers
- multicast TV channel-to-VLAN mapping status
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| MacAddress |
From DLINK-3100-DEVICEPARAMS-MIB
| rndErrorDesc | OBJECT-TYPE |
| rndErrorSeverity | OBJECT-TYPE |
From DLINK-3100-MIB
| rlBrgMulticast | OBJECT-IDENTITY |
| rlMacMulticast | OBJECT-IDENTITY |
| rnd | MODULE-IDENTITY |
| rndNotifications | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From Q-BRIDGE-MIB
| PortList | |
| VlanIndex |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF rlMacMulticastUnregFilterFailed | 1.3.6.1.4.1.171.10.94.89.89.0.1 | Warning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number. | ||
| NTF rlIgmpMldSnoopTriplePlayPort | 1.3.6.1.4.1.171.10.94.89.89.0.208 | Informational trap indicating that a query was recieved on a triple play port. | ||
| T/F rlMacMulticastEnable | 1.3.6.1.4.1.171.10.94.89.89.55.1 | TruthValue | read-write | Enable/Disable MAC Multicast bridging in the device. |
| rlIgmpSnoop | 1.3.6.1.4.1.171.10.94.89.89.55.2 | |||
| INT rlIgmpSnoopMibVersion | 1.3.6.1.4.1.171.10.94.89.89.55.2.1 | INTEGER | read-only | MIB's version, the current version is 3. IGMP Snooping supports IGMPv3. |
| T/F rlIgmpSnoopEnable | 1.3.6.1.4.1.171.10.94.89.89.55.2.2 | TruthValue | read-write | Enable/Disable IGMP Snooping in the switch. |
| INT rlIgmpSnoopHostAgingTime | 1.3.6.1.4.1.171.10.94.89.89.55.2.3 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out. |
| INT rlIgmpSnoopRouterAgingTime | 1.3.6.1.4.1.171.10.94.89.89.55.2.4 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out. |
| rlIgmpSnoopVlanTable | 1.3.6.1.4.1.171.10.94.89.89.55.2.7 | not-accessible | The table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports. | |
| rlIgmpSnoopVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1 | not-accessible | An entry (conceptual row) in the rlIgmpSnoopVlanTable. | |
| INT rlIgmpSnoopVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.1 | INTEGER | read-only | The tag of the VLAN for which this entry contains information for an IP Multicast Router. |
| T/F rlIgmpSnoopVlanEnable | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.2 | TruthValue | read-write | Enable/Disable IGMP Snooping in the vlan. |
| T/F rlIgmpSnoopVlanRouterLearn | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.3 | TruthValue | read-write | Enable/Disable of Learning of routers in the vlan. |
| INT rlIgmpSnoopVlanHostTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.4 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. |
| INT rlIgmpSnoopVlanQuerierTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.5 | INTEGER | read-write | The amount of time where no query is heard until querier is activated |
| INT rlIgmpSnoopVlanRouterTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.6 | INTEGER | read-write | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. |
| INT rlIgmpSnoopVlanLeaveTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.7 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. |
| IGM rlIgmpSnoopVlanIgmpVersion | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.8 | IgmpVersion | read-only | The current IGMP protocol version running on the VLAN. |
| POR rlIgmpSnoopVlanRouterPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.9 | PortList | read-only | List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages |
| INT rlIgmpSnoopIGMP224ReportsHandle | 1.3.6.1.4.1.171.10.94.89.89.55.2.8 | INTEGER | read-write | This varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore. |
| rlIgmpSnoopMulticastTvTable | 1.3.6.1.4.1.171.10.94.89.89.55.2.10 | not-accessible | multicast vlan used for this port | |
| rlIgmpSnoopMulticastTvEntry | 1.3.6.1.4.1.171.10.94.89.89.55.2.10.1 | not-accessible | entry of multicast ip | |
| VLA rlIgmpSnoopMulticastTvVID | 1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.1 | VlanIndex | read-only | Specify the multicast ip to be used. |
| IP rlIgmpSnoopMulticastTvGroup | 1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.2 | IpAddress | read-only | Specify the multicast ip to be used. |
| ROW rlIgmpSnoopMulticastTvStatus | 1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.3 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rlIgmpSnoopMembershipTable | 1.3.6.1.4.1.171.10.94.89.89.55.2.11 | not-accessible | The table listing the IP multicast memberships. | |
| rlIgmpSnoopMembershipEntry | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1 | not-accessible | An entry (conceptual row) in the rlIgmpSnoopMembershipTable. | |
| VLA rlIgmpSnoopMembershipVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.1 | VlanIndex | read-only | The VLAN tag for which this entry contains multicast membership information. |
| IP rlIgmpSnoopMembershipGroupIpAddress | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.2 | IpAddress | read-only | The multicast group address. |
| IP rlIgmpSnoopMembershipSourceIpAddress | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.3 | IpAddress | read-only | The unicast source address. |
| POR rlIgmpSnoopMembershipIncPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.4 | PortList | read-only | Included ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3). |
| POR rlIgmpSnoopMembershipExcPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.5 | PortList | read-only | Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3). |
| INT rlIgmpSnoopMembershipExpiryTime | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.6 | INTEGER | read-only | Time till entry will expire. |
| IGM rlIgmpSnoopMembershipCompatibilityMode | 1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.7 | IgmpVersion | read-only | IGMP group compatibility mode. |
| rlIgmpSnoopQuerierVlanTable | 1.3.6.1.4.1.171.10.94.89.89.55.2.12 | not-accessible | A table that contains IGMP Snooping Querier information about every vlan. This is indexed by vlan tag. | |
| rlIgmpSnoopQuerierVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1 | not-accessible | An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable. | |
| VLA rlIgmpSnoopQuerierVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.1 | VlanIndex | read-only | An IGMP Snoop Querier entry vlan tag. |
| T/F rlIgmpSnoopQuerierAdminEnable | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.2 | TruthValue | read-write | The desired administrative state of IGMP Snoop Querier on the vlan. |
| T/F rlIgmpSnoopQuerierOperEnable | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.3 | TruthValue | read-only | The current operational state of IGMP Snoop Querier on the vlan. |
| IP rlIgmpSnoopQuerierAdminAddr | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.4 | IpAddress | read-write | The desired IP address is being used in IGMP Snoop Querier messages on the vlan. |
| IP rlIgmpSnoopQuerierOperAddr | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.5 | IpAddress | read-only | The current operational IP address is being used in IGMP Snoop Querier messages on the vlan. |
| IGM rlIgmpSnoopQuerierAdminVersionNumber | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.6 | IgmpVersion | read-write | The highest version number of IGMP Snoop Querier for the vlan. |
| IGM rlIgmpSnoopQuerierOperVersionNumber | 1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.7 | IgmpVersion | read-only | The current operational version number of IGMP Snoop Querier for the vlan. |
| INT rlMacMulticastMaxEntriesNum | 1.3.6.1.4.1.171.10.94.89.89.55.3 | INTEGER | read-only | The maximum number of Mac Multicast entries the device supports. |
| rlMacMulticastFilter | 1.3.6.1.4.1.171.10.94.89.89.55.4 | |||
| POR rlMacMulticastUnregFilterEnable | 1.3.6.1.4.1.171.10.94.89.89.55.4.1 | PortList | read-write | Each bit represent a port whether Unregistered Multicast Filtering enable |
| rlMldSnoop | 1.3.6.1.4.1.171.10.94.89.89.55.5 | |||
| T/F rlMldSnoopEnable | 1.3.6.1.4.1.171.10.94.89.89.55.5.1 | TruthValue | read-write | Enable/Disable Mld Snooping in the switch. |
| INT rlMldSnoopHostAgingTime | 1.3.6.1.4.1.171.10.94.89.89.55.5.2 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlMldSnoopGroupTable will be aged out. |
| INT rlMldSnoopRouterAgingTime | 1.3.6.1.4.1.171.10.94.89.89.55.5.3 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlMldSnoopInterfaceTable will be aged out. |
| rlIgmpMldSnoopMembershipTable | 1.3.6.1.4.1.171.10.94.89.89.55.5.4 | not-accessible | The table listing the IP multicast memberships. | |
| rlIgmpMldSnoopMembershipEntry | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1 | not-accessible | An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable. | |
| VLA rlIgmpMldSnoopMembershipVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.1 | VlanIndex | read-only | The VLAN tag for which this entry contains multicast membership information. |
| IPt rlIgmpMldSnoopMembershipGroupIpAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.2 | InetAddressType | read-only | Inet type IPv4/IPv6. |
| IP rlIgmpMldSnoopMembershipGroupIpAddress | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.3 | InetAddress | read-only | The multicast group address. |
| IPt rlIgmpMldSnoopMembershipSourceIpAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.4 | InetAddressType | read-only | Inet type IPv4/IPv6. |
| IP rlIgmpMldSnoopMembershipSourceIpAddress | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.5 | InetAddress | read-only | The unicast source address. |
| POR rlIgmpMldSnoopMembershipIncPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.6 | PortList | read-only | Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2). |
| POR rlIgmpMldSnoopMembershipExcPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.7 | PortList | read-only | list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ). |
| INT rlIgmpMldSnoopMembershipExpiryTime | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.8 | INTEGER | read-only | Time till entry will expire. |
| IGM rlIgmpMldSnoopMembershipCompatibilityMode | 1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.9 | IgmpVersion | read-only | IGMP/MLD group compatibility mode. |
| rlIgmpMldSnoopVlanTable | 1.3.6.1.4.1.171.10.94.89.89.55.5.5 | not-accessible | The table lists the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports. | |
| rlIgmpMldSnoopVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1 | not-accessible | An entry (conceptual row) in the rlIgmpSnoopVlanTable. | |
| IPt rlIgmpMldSnoopVlanInetAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.1 | InetAddressType | read-only | Inet type ipv6/ipv4. |
| INT rlIgmpMldSnoopVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.2 | INTEGER | read-only | The tag of the VLAN for which this entry contains information for an IP Multicast Router. |
| T/F rlIgmpMldSnoopVlanEnable | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.3 | TruthValue | read-write | Enable/Disable IGMP Snooping in the vlan. |
| T/F rlIgmpMldSnoopVlanRouterLearn | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.4 | TruthValue | read-write | Enable/Disable of Learning of routers in the vlan. |
| INT rlIgmpMldSnoopVlanHostTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.5 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. |
| INT rlIgmpMldSnoopVlanQuerierTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.6 | INTEGER | read-write | The amount of time where no query is heard until querier is activated |
| INT rlIgmpMldSnoopVlanRouterTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.7 | INTEGER | read-write | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. |
| INT rlIgmpMldSnoopVlanLeaveTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.8 | INTEGER | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. |
| IGM rlIgmpMldSnoopVlanIgmpVersion | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.9 | IgmpVersion | read-only | The current IGMP protocol version running on the VLAN. |
| POR rlIgmpMldSnoopVlanRouterPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.10 | PortList | read-only | List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN |
| POR rlIgmpMldSnoopVlanRouterStaticPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.11 | PortList | read-write | List of router ports configured statically on this VLAN. |
| POR rlIgmpMldSnoopVlanRouterForbiddenPortlist | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.12 | PortList | read-write | List of ports statically configured to NOT be router ports on this VLAN |
| T/F rlIgmpMldSnoopVlanQueryOverride | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.13 | TruthValue | read-write | Enable/Disable overriding of Query values |
| U32 rlIgmpMldSnoopVlanOperRobustness | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.14 | Unsigned32 | read-only | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses. |
| U32 rlIgmpMldSnoopVlanOperQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.15 | Unsigned32 | read-only | The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value. |
| U32 rlIgmpMldSnoopVlanOperQueryMaxResponseTime | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.16 | Unsigned32 | read-only | The maximum query response interval advertised in MGMDv2 or v3 queries on this interface. |
| U32 rlIgmpMldSnoopVlanOperLastMemberQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.17 | Unsigned32 | read-only | The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1. |
| U32 rlIgmpMldSnoopVlanOperLastMemberQueryCount | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.18 | Unsigned32 | read-only | Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. |
| U32 rlIgmpMldSnoopVlanOperStartupQueryCount | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.19 | Unsigned32 | read-only | Represents the number of Queries sent out on startup separated by the Startup Query Interval. |
| U32 rlIgmpMldSnoopVlanOperStartupQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.20 | Unsigned32 | read-only | This variable represents the interval between General Queries sent by a Querier on startup. |
| U32 rlIgmpMldSnoopVlanOperHostTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.21 | Unsigned32 | read-only | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval + rlIgmpMldSnoopVlanOperQueryMaxResponseTime } |
| U32 rlIgmpMldSnoopVlanOperRouterTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.22 | Unsigned32 | read-only | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval } |
| U32 rlIgmpMldSnoopVlanOperLeaveTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.23 | Unsigned32 | read-only | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanOperLastMemberQueryCount * rlIgmpMldSnoopVlanOperLastMemberQueryInterval } |
| U32 rlIgmpMldSnoopVlanAdminRobustness | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.24 | Unsigned32 | read-write | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses. |
| U32 rlIgmpMldSnoopVlanAdminQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.25 | Unsigned32 | read-write | The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value. |
| U32 rlIgmpMldSnoopVlanAdminQueryMaxResponseTime | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.26 | Unsigned32 | read-write | The maximum query response interval advertised in MGMDv2 or v3 queries on this interface. |
| U32 rlIgmpMldSnoopVlanAdminLastMemberQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.27 | Unsigned32 | read-write | The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1. |
| U32 rlIgmpMldSnoopVlanAdminLastMemberQueryCount | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.28 | Unsigned32 | read-only | Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. |
| U32 rlIgmpMldSnoopVlanAdminStartupQueryCount | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.29 | Unsigned32 | read-write | Represents the number of Queries sent out on startup separated by the Startup Query Interval. |
| U32 rlIgmpMldSnoopVlanAdminStartupQueryInterval | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.30 | Unsigned32 | read-write | This variable represents the interval between General Queries sent by a Querier on startup. |
| U32 rlIgmpMldSnoopVlanAdminHostTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.31 | Unsigned32 | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval + rlIgmpMldSnoopVlanAdminQueryMaxResponseTime } |
| U32 rlIgmpMldSnoopVlanAdminRouterTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.32 | Unsigned32 | read-write | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval } |
| U32 rlIgmpMldSnoopVlanAdminLeaveTimeOut | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.33 | Unsigned32 | read-write | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanAdminLastMemberQueryCount * rlIgmpMldSnoopVlanAdminLastMemberQueryInterval } |
| T/F rlIgmpMldSnoopVlanIsImmediateLeave | 1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.34 | TruthValue | read-write | Enable/Disable immediate leave on this Vlan |
| rlIgmpMldSnoopMulticastTvTable | 1.3.6.1.4.1.171.10.94.89.89.55.5.6 | not-accessible | multicast vlan used for this port | |
| rlIgmpMldSnoopMulticastTvEntry | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1 | not-accessible | entry of multicast ip | |
| IPt rlIgmpMldSnoopMulticastTvInetAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.1 | InetAddressType | read-only | Inet type ipv6/ipv4. |
| VLA rlIgmpMldSnoopMulticastTvVID | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.2 | VlanIndex | read-only | Specify the multicast ip to be used. |
| IPt rlIgmpMldSnoopMulticastTvGroupAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.3 | InetAddressType | read-only | Inet type ipv6/ipv4. |
| IP rlIgmpMldSnoopMulticastTvGroup | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.4 | InetAddress | read-only | Specify the multicast ip to be used. |
| ROW rlIgmpMldSnoopMulticastTvStatus | 1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.5 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rlIgmpMldSnoopQuerierVlanTable | 1.3.6.1.4.1.171.10.94.89.89.55.5.7 | not-accessible | A table that contains IGMP/MLD Snooping Querier information about every vlan. This is indexed by vlan tag. | |
| rlIgmpMldSnoopQuerierVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1 | not-accessible | An entry (conceptual row) in the rlIgmpMldSnoopQuerierVlanTable. | |
| VLA rlIgmpMldSnoopQuerierVlanTag | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.1 | VlanIndex | read-only | An IGMP/MLD Snoop Querier entry vlan tag. |
| T/F rlIgmpMldSnoopQuerierAdminEnable | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.2 | TruthValue | read-write | The desired administrative state of IGMP/MLD Snoop Querier on the vlan. |
| T/F rlIgmpMldSnoopQuerierOperEnable | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.3 | TruthValue | read-only | The current operational state of IGMP/MLD Snoop Querier on the vlan. |
| IPt rlIgmpMldSnoopQuerierAdminAddrInetAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.4 | InetAddressType | read-only | Inet type IPv6/IPv4. |
| IP rlIgmpMldSnoopQuerierAdminAddr | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.5 | InetAddress | read-write | The desired IP address is being used in IGMP/MLD Snoop Querier messages on the vlan. |
| IPt rlIgmpMldSnoopQuerierOperAddrInetAddressType | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.6 | InetAddressType | read-only | Inet type IPv6/IPv4. |
| IP rlIgmpMldSnoopQuerierOperAddr | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.7 | InetAddress | read-only | The current operational IP address is being used in IGMP/MLD Snoop Querier messages on the vlan. |
| IGM rlIgmpMldSnoopQuerierAdminVersionNumber | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.8 | IgmpVersion | read-write | The highest version number of IGMP Snoop Querier for the vlan. |
| IGM rlIgmpMldSnoopQuerierOperVersionNumber | 1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.9 | IgmpVersion | read-only | The current operational version number of IGMP Snoop Querier for the vlan. |
| INT rlBrgMulticastMibVersion | 1.3.6.1.4.1.171.10.94.89.89.116.1 | INTEGER | read-only | MIB's version, the current version is 4. Snooping supports IGMPv1/v2/v3 and MLDv1/v2. |
| rlBrgStaticIpMulticastTable | 1.3.6.1.4.1.171.10.94.89.89.116.3 | not-accessible | A table containing filtering information for IP Multicast addresses for each VLAN. | |
| rlBrgStaticIpMulticastEntry | 1.3.6.1.4.1.171.10.94.89.89.116.3.1 | not-accessible | Filtering information configured into the device. The set of ports to which frames containing this IP Multicast destination address and IP source address are allowed to be forwarded. | |
| VLA rlBrgStaticIpMulticastVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.1 | VlanIndex | not-accessible | The VLAN tag for which this entry is configured. |
| IP rlBrgStaticIpMulticastGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.2 | IpAddress | not-accessible | The multicast group address for which the filtering information applies |
| IP rlBrgStaticIpMulticastSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.3 | IpAddress | not-accessible | The unicast group address for which the filtering information applies. |
| POR rlBrgStaticIpMulticastFrwPorts | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.4 | PortList | read-write | The ports the data should be forwarded to |
| POR rlBrgStaticIpMulticastForbiddenPorts | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.5 | PortList | read-write | The ports that overrides dynamic configuration and prevents multicast data forwarding for the group or group and source to these ports. |
| ROW rlBrgStaticIpMulticastStatus | 1.3.6.1.4.1.171.10.94.89.89.116.3.1.6 | RowStatus | read-write | The status of the table entry. It's used to add/delete an entry |
| rlBrgIpMulticastTable | 1.3.6.1.4.1.171.10.94.89.89.116.4 | not-accessible | A table containing all filtering information for IP Multicast addresses for each VLAN | |
| rlBrgIpMulticastEntry | 1.3.6.1.4.1.171.10.94.89.89.116.4.1 | not-accessible | An entry (conceptual row) in the rlBrgIpMulticastTable contains IP Multicast FDB data | |
| VLA rlBrgIpMulticastVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.4.1.1 | VlanIndex | not-accessible | The VLAN tag for which this entry is configured. |
| IP rlBrgIpMulticastGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.4.1.2 | IpAddress | not-accessible | Multicast group address (destination address) of data frames |
| IP rlBrgIpMulticastSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.4.1.3 | IpAddress | not-accessible | Unicast source address of data frames. |
| POR rlBrgIpMulticastEgressPorts | 1.3.6.1.4.1.171.10.94.89.89.116.4.1.4 | PortList | read-only | The complete set of ports, in this VLAN, to which frames destined for this Group IP address or Group and Source address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list. |
| POR rlBrgIpMulticastLearntPorts | 1.3.6.1.4.1.171.10.94.89.89.116.4.1.5 | PortList | read-only | The subset of ports in rlBrgIpMulticastEgressPorts which were learnt by IGMP or some other dynamic mechanism, in this Filtering database.. |
| rlBrgStaticInetMulticastTable | 1.3.6.1.4.1.171.10.94.89.89.116.5 | not-accessible | A table containing filtering information for INET (Pv4 and IPv6) Multicast addresses for each VLAN. | |
| rlBrgStaticInetMulticastEntry | 1.3.6.1.4.1.171.10.94.89.89.116.5.1 | not-accessible | Filtering information configured into the device. The set of ports to which frames containing this IP Multicast destination address and IP source address are allowed to be forwarded. | |
| VLA rlBrgStaticInetMulticastVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.1 | VlanIndex | not-accessible | The VLAN tag for which this entry is configured. |
| IPt rlBrgStaticInetMulticastGroupAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.2 | InetAddressType | read-only | Inet type ipv6/ipv4. |
| IP rlBrgStaticInetMulticastGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.3 | InetAddress | not-accessible | The multicast group address for which the filtering information applies |
| IPt rlBrgStaticInetMulticastSourceAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.4 | InetAddressType | read-only | Inet type ipv6/ipv4. |
| IP rlBrgStaticInetMulticastSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.5 | InetAddress | not-accessible | The unicast group address for which the filtering information applies. |
| POR rlBrgStaticInetMulticastFrwPorts | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.6 | PortList | read-write | The ports the data should be forwarded to |
| POR rlBrgStaticInetMulticastForbiddenPorts | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.7 | PortList | read-write | The ports that overrides dynamic configuration and prevents multicast data forwarding for the group or group and source to these ports. |
| ROW rlBrgStaticInetMulticastStatus | 1.3.6.1.4.1.171.10.94.89.89.116.5.1.8 | RowStatus | read-write | The status of the table entry. It's used to add/delete an entry |
| rlBrgInetMulticastTable | 1.3.6.1.4.1.171.10.94.89.89.116.6 | not-accessible | A table containing all filtering information for IP Multicast addresses for each VLAN | |
| rlBrgInetMulticastEntry | 1.3.6.1.4.1.171.10.94.89.89.116.6.1 | not-accessible | An entry (conceptual row) in the rlBrgInetMulticastTable contains IP Multicast FDB data | |
| VLA rlBrgInetMulticastVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.1 | VlanIndex | not-accessible | The VLAN tag for which this entry is configured. |
| IPt rlBrgInetMulticastGroupAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.2 | InetAddressType | read-only | Inet type IPv4/IPv6. |
| IP rlBrgInetMulticastGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.3 | InetAddress | not-accessible | Multicast group address (destination address) of data frames |
| IPt rlBrgInetMulticastSourceAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.4 | InetAddressType | read-only | Inet type IPv4/IPv6. |
| IP rlBrgInetMulticastSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.5 | InetAddress | not-accessible | Unicast source address of data frames. |
| POR rlBrgInetMulticastEgressPorts | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.6 | PortList | read-only | The complete set of ports, in this VLAN, to which frames destined for this Group IP address or Group and Source address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list. |
| POR rlBrgInetMulticastLearntPorts | 1.3.6.1.4.1.171.10.94.89.89.116.6.1.7 | PortList | read-only | The subset of ports in rlBrgIpMulticastEgressPorts which were learnt by IGMP or some other dynamic mechanism, in this Filtering database.. |
| rlBrgIpmFdbRefTable | 1.3.6.1.4.1.171.10.94.89.89.116.7 | not-accessible | A table containing all information stored in IPM FDB overlapping Reference Table | |
| rlBrgIpmFdbRefEntry | 1.3.6.1.4.1.171.10.94.89.89.116.7.1 | not-accessible | An entry (conceptual row) in the rlBrgIpmFdbRefTable contains overlapping Reference Table FDB data | |
| VLA rlBrgIpmFdbRefVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.1 | VlanIndex | not-accessible | The VLAN tag for which this entry is configured. |
| IPt rlBrgIpmFdbRefGroupAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.2 | InetAddressType | not-accessible | Multicast group address (destination address) of data frames |
| IP rlBrgIpmFdbRefGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.3 | InetAddress | not-accessible | Multicast group address (destination address) of data frames |
| IPt rlBrgIpmFdbRefSourceAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.4 | InetAddressType | not-accessible | Unicast source address of data frames. |
| IP rlBrgIpmFdbRefSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.5 | InetAddress | not-accessible | Unicast source address of data frames. |
| POR rlBrgIpmFdbRefPorts | 1.3.6.1.4.1.171.10.94.89.89.116.7.1.6 | PortList | read-only | The list of ports represented in IPM FDB overlapping Reference Table |
| rlBrgDynamicCmdTable | 1.3.6.1.4.1.171.10.94.89.89.116.8 | not-accessible | The (conceptual) table for Dynamic IPM FDB command. For debugging purposes only. This MIB is prohibited to be used with working IGMP/MLD snooping | |
| rlBrgDynamicCmdEntry | 1.3.6.1.4.1.171.10.94.89.89.116.8.1 | not-accessible | An entry (conceptual row) in the rlBrgDynamicCmdTable. | |
| INT rlBrgDynamicCmdKey | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.1 | INTEGER | not-accessible | Key of the rlBrgDynamicCmdTable table |
| VLA rlBrgDynamicCmdVlanTag | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.2 | VlanIndex | read-write | The VLAN tag for which this entry is configured. |
| IPt rlBrgDynamicCmdGroupAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.3 | InetAddressType | read-write | Multicast group address (destination address) of data frames |
| IP rlBrgDynamicCmdGroupAddress | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.4 | InetAddress | read-write | Multicast group address (destination address) of data frames |
| IPt rlBrgDynamicCmdSourceAddressType | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.5 | InetAddressType | read-write | Unicast source address of data frames. |
| IP rlBrgDynamicCmdSourceAddress | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.6 | InetAddress | read-write | Unicast source address of data frames. |
| POR rlBrgDynamicCmdPorts | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.7 | PortList | read-write | The list of ports for them the command is issued |
| DYN rlBrgDynamicCmdType | 1.3.6.1.4.1.171.10.94.89.89.116.8.1.8 | DynamicCmdType | read-write | Current type of command |
RFC description
D-Link Layer 2 switch multicast bridging and IGMP snooping configuration for multicast traffic.
Start monitoring D-Link 3100 series switch (DES/DGS-3100), IGMP/MLD snooping and MAC multicast bridging with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.