All MIBs › DKSF-70-6-X-X-1 › npCurLoopStatus
npCurLoopStatus
Module: DKSF-70-6-X-X-1
OID (symbolic): DKSF-70-6-X-X-1::npCurLoopStatus
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
What is npCurLoopStatus?
Summarizes the health of a 4-20mA current-loop sensor circuit: normal, an out-of-range alert reading, a cut (open) loop, a shorted loop, or an unpowered loop. Anything other than ok(0) typically indicates a wiring fault or sensor failure worth investigating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.2 snmpwalk -v2c -c public <target> DKSF-70-6-X-X-1::npCurLoopStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.2.1 snmpget -v2c -c public <target> DKSF-70-6-X-X-1::npCurLoopStatus.1
Start monitoring NetPing DKSF-70 environmental sensing/relay controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-6-X-X-1::npCurLoopStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 environmental sensing/relay controller from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.1.1.2 | npCurLoopStatus | DKSF-70-6-X-X-1 |