All MIBs › DKSF-70-5-X-X-1 › npCurLoopPower
npCurLoopPower
Module: DKSF-70-5-X-X-1
OID (symbolic): DKSF-70-5-X-X-1::npCurLoopPower
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Control of loop power 0=Off, 1=On, 2=reset by off/on power
What is npCurLoopPower?
This controls power to this current loop: off, on, or a momentary power cycle to reset the attached sensor. An admin writes cyclePower here to remotely reset a misbehaving loop-powered sensor without physically disconnecting it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.7 snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npCurLoopPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.7.1 snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npCurLoopPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.1.1.7.1 i <value>
Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npCurLoopPower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.1.1.7 | npCurLoopPower | DKSF-70-5-X-X-1 |