All MIBs › DKSF-70-4-X-X-1 › npCurLoopI
npCurLoopI
Module: DKSF-70-4-X-X-1
OID (symbolic): DKSF-70-4-X-X-1::npCurLoopI
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Loop current, mA
What is npCurLoopI?
The measured current flowing through this loop, in milliamps (0-99999). This is the primary reading from a 4-20mA industrial sensor wired to the device, from which the physical measurement (pressure, level, etc.) is derived.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.3 snmpwalk -v2c -c public <target> DKSF-70-4-X-X-1::npCurLoopI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.3.1 snmpget -v2c -c public <target> DKSF-70-4-X-X-1::npCurLoopI.1
Start monitoring NetPing DKSF-70 environmental sensor/relay controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-4-X-X-1::npCurLoopI OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 environmental sensor/relay controller from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.1.1.3 | npCurLoopI | DKSF-70-4-X-X-1 |